Park Tool's Power Lift Shop Stand Add On Kit turns the PRS-33 single arm stand into a double arm stand. It comes complete with a clamp, sliding carriage, work tray, electric motor, power source, chain and hardware.
The latest incarnation of the Pedro's Master Tool Kit brings refinements co-developed by professional mechanics world wide including those of Garmin/Slipstream professional road team and the dominant Luna Chix mountain bike team. The Master Tool Kit 3.0 is fully redressed in a new custom, lockable, water-tight, pressure-regulated, ABS plastic case that laughs at its lifetime warranty. Custom tool pallets securely hold and organize tools and feature extra pockets leaving room to add tools and personalize your kit. Includes 70 Tools: - Chain Checker Plus - Adjustable Wrench-10"" - Crank Adjusting Cap Driver - The Hammer - Utility Knife - Diagonal Cutters - Needle Nose Pliers - Pro Spoke Wrench - 3.23 - Pro Spoke Wrench - 3.30 - Pro Spoke Wrench - 3.45 - Quick Link Pliers - Pro Chain Tool (New) - Toothbrush - Y wrenches-2, 2.5, 3mm; 4, 5, 6mm; T10, T25, T30 - 3-Piece Screwdriver Set, #1 Ph, #2Ph, 5.5mm Flat - 9, 10, 11, 12, 13, 14mm Ratcheting Wrenches - Disc Wrench-7mm & 8mm Flare Wrench and Rotor Truing - Trixie- 8, 9, 10, 15mm Box, Bottle, Cog Lockring - 8-piece Pro T/L Hex Set - 9-piece L Hex Set - L Torx Set - 7 piece - Equalizer Pedal Wrench - Vise Whip - Splined Bottom Bracket Socket - Cassette Lockring Socket - Campagnolo BB and Cassette Socket - Bottom Bracket Wrench - Cable Cutter 13-19mm Cone Wrenches (1 each) - 6mm and 8mm Hex Drivers - Universal Crank Puller - 2 Tire Levers - Tape Measure
A carefully selected set of some of our finest tools, housed in the BX-2 Blue Box Tool Case. The EK-2 contains more than 45 shop-level tools that fit into BX-2 Blue Box Tool Case with extra room for more tools and parts. Perfect for professional shop and team mechanics, as well as the home mechanic who wants the ultimate portable tool kit.
The standard of the bike industry for over 40 years, the PRS-2.2-2 clamps two bikes and rotates horizontally 360 degrees, allowing one bike to be swung out of the way to work on another. Built from heavy-gauge oversized steel tubing, then chrome plated for years of carefree use. NOTE: The PRS-2.2 does not include base. Order #135 Steel Plate Base or FP-2 Floor Mounting Plate. - The 100-3D Micro-Adjust clamp grips nearly any tube from 7/8" to 3" (23mm to 76mm), including aero tubes - The clamp jaws are nominally 2.75 inches (7cm) wide - Easily height adjustable to five positions from 50" to 62" (128cm to 158cm) using our proven lock block system with locking pin - The maximum weight holding capacity of the PRS-2.2 is 120 lbs. (54kg) - Includes #105 cast aluminum work tray
The standard of the bike industry for over 40 years, the PRS-2.2 clamps two bikes and rotates horizontally 360 degrees, allowing one bike to be swung out of the way to work on another. Built from heavy-gauge oversized steel tubing, then chrome plated for years of carefree use. NOTE: The PRS-2.2 does not include base. Order #135 Steel Plate Base or FP-2 Floor Mounting Plate. - Shop quality 100-3C Clamps (2) quickly adjust to fit any frame tube up to 1-5/8" (41mm) - The clamp jaws are nominally 4 inches (10cm) wide - Easily height adjustable to five positions from 50" to 62" (128cm to 158cm) using our proven lock block system with locking pin - The maximum weight holding capacity of the PRS-2.2 is 120 lbs. (54kg) - Includes #105 cast aluminum work tray
Proper frame preparation is very important. Park Tool's Head Tube Reaming and Facing Set combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. Includes: • 30.1 mm reamer (part #751.2) and four different size pilots (29.8mm, 30.0mm, 33.8mm, and 36.8mm) • 690 facer • Quick-release, quick-adjust feature: bottom portion slides off and on easily without threading SHIS terminology: The HTR-1 as stock will face frames of EC29, EC30, EC34 and EC37. It will ream frames of EC30. Accessories will allow service in other standards.
Proper frame preparation is very important. Park Tool's Head Tube Reaming and Facing Set (33.8mm reamer) combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. The HTR-1B comes with a reamer of 33.9mm for the 1-1/8 inch headset standard. Includes: • 33.9mm reamer (part #754.2), and four different size pilots (29.8mm, 30.0mm, 33.8mm, and 36.8mm) • 690 Facer • Quick-release, quick-adjust feature: bottom portion slides off and on easily without threading SHIS terminology: The HTR-1B as stock will face frames of EC29, EC30, EC34 and EC37. It will ream frames of EC34. Accessories will allow service in other standards.
To ensure proper headset performance and longevity, special attention must be given to accurately machine the fork’s crown race seat. Park Tool's Crown Race Cutting Tool is a professional-quality machining tool for milling both the outer edge and lower surfaces of the crown race seat. • Includes high speed steel cutters and adjustable collets to machine 26.5mm and 27.1mm crown race seats on 1” forks and 30.1mm crown race seats on 1-1/8" forks • Unique adjusting system allows a tight fit of the tool on any fork, threaded or unthreaded (even forks with externally butted steerer tubes), ensuring a smooth, accurate cut and proper alignment of the fork in the frame • Cutter sized for 1-inch standard is part #845 (sold separately) • Cutter for 1-1/8 inch standard is #846 (sold separately)
The 761s Reaming and Facing Cutters are used to machine head tubes using integrated headsets with a 42 mm bearing and 45 degree angular contact used by the Campagnolo® Hiddenset standard. FSA® and other manufacturers also make headsets in this standard. Includes upper and lower cutters.
- Designed for reaming and facing Cane Creek standard Integrated headset frames designed for 41.0mm x 36/45 degree angular contact bearing - Includes 1) lower and 1) upper reamer/facer cutters - For use with the HTR-1 head tube reaming/facing set and the #750 XL centering cone adapter - Combined reaming/facing cutters for 2-in-1 operation
The DT-5.2 is engineered and built to accurately face front or rear disc brake mounts so they are precisely aligned to the rotor. - Faces any IS Mount, Post Mount, or new Shimano Flat Mount, including low clearance, chainstay mounts - Telescoping axle adaptors allow use with any configuration of open or thru-axle dropouts and dropout widths (including Boost 110, Boost 148 and all fat bike axles) - Includes two facing cutters: IS Mounts Post and Flat Mounts - Includes storage case
Frame and Fork Taps will become a lifesaver at some time for virtually every mechanic. These taps are made of high-carbon steel and are precision ground. Park Tool's Frame and Fork Taps cut easily and fit conventional tap handles. - Tap-12.1: 12Mm X 1.0 - Tap-12.2: 12Mm X 1.5 - Tap-12.3: 12Mm X 1.75 - Tap-15.1: 15Mm X 1.0 - Tap-15.2: 15Mm X 1.5 - Tap-20.1: 20Mm X 1.0 - Tap-20.2: 20Mm X 1.5 - Tap-20.3: 20Mm X 2.0
The next generation of wheel truing stands! The TS-4 is made to accurately gauge any size wheel, with or without the tire installed. The TS-4 has many of the same features as Park Tool's famous TS-2.2 with some additional attributes to accommodate today’s wide variety of hub, wheel and tire combinations. - Both uprights move simultaneously to always keep wheel centered in the stand. - Accommodates axle widths from 75mm to 215mm - Direct action caliper arm adjusts to work with wheel sizes from 16" to 29"+ - Accommodates tire widths up to 5" with or without brake rotor mounted - Machined, welded, assembled and calibrated in our factory in St. Paul, MN - Precise accuracy, operation and adjustability - Built in thru-axle adaptors - Chrome plated and powder coated heavy gauge steel construction - Removable, replaceable nylon caliper tips to protect painted/anodized rims - Dial Indicator compatible (TS-2Di) (Sold separately) - Rotor gauge compatible (DT-3 & DT-3i.2) (Sold separately)
Park Tool's Bottom Bracket Facing Set is designed to be a complete self-contained facing set, combining top-quality precision parts with ease of use. Simply install the threaded inserts using the facer handle, then insert the facing tool through the guides and install the tension spring and speed nut. After applying a liberal amount of cutting oil, the BFS-1 easily cuts the shell material, giving you a clean, faced surface. Now you're ready to install the bottom bracket. The English threading inserts are included. The Italian threading (36 x 24) inserts are available as an accessory, as part #688. Two are required.
Updated with a smoother, more solid rotation system! Originally designed for professional Pro Tour mechanics. The PRS-22.2 firmly holds any bike without clamping the frame or seat post by supporting the bottom bracket then locking either the front or rear dropouts. Works with any style axle system, including quick release and all sizes of thru-axles without cumbersome adaptors. Ideal for cleaning and general repair work, the PRS-22.2 features a solid tripod base and folds compactly for storage or transport. - Precisely constructed of anodized 6063 T6 lightweight aluminum and durable composites (12.5lbs, 5.67kg) - Adjustable BB height of 30" to 45" / 76cm to 114cm - 360 degree horizontal rotation allows easy access to all sides of the bike - Customizable bottom bracket supports accommodate a wide variety of BB shells - Main beam is adjustable fore and aft to customize balance points - Adjustable collar features receivers for optional accessories (sold separately) 106 Work Tray and PHT-1 Paper Towel Holder - Easily transported in the BAG-20 (sold separately)
Now you can update your 2010+ BoXXer Race, Team, RC, R2C2 and World Cup with the Charger Damper Upgrade Kit. The Charger is RockShox’s insanely refined damper, and its sealed construction with an expandable rubber bladder ensures damping consistency, reduces vibration, and is almost 100 grams lighter than the previous BoXXer damper. Adjustment is easy and intuitive, with a single compression adjuster and a beginning stroke rebound adjuster with a factory set Rapid Recovery tune. The internal shim stacks can be re-tuned for light or firm compression and rebound settings. Includes damper, syringe, and suspension fluid.
The Park Tool 758.2 will ream and face the head tubes of bike using the 1.5" standard. The 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and Reamer. Must also be used with the 750.2 Centering Cone Adaptor.
- The HBP-1 is designed to quickly and accurately press bearings into a wide variety of cartridge bearing-type bicycle hubs. - Quick release design for fast tool installation and removal - Includes two bearing presses and precision machined aluminum pilots, bushings, and spacers - Works with more than 20 different cartridge bearing sizes and multiple axle configurations
Park Tool's Repair Stand Base is a steel base plate for the PRS-2 OSLB, PRS-2 OS-1, PRS-2 OS-2 Repair Stands (each sold separately). • 23" x 35" x 7/16" steel plate • Approximately 118 lbs • Black painted
For a portable, professional-grade, cycling-specific tool kit, look no further than Lezyne's Port-A-Shop Pro. It includes shop-quality tools for general bicycle maintainance. Durable, composite case with sturdy foam interior. Labeled slots keeps tools organized. Spare pocket for personal tools/belongings. Tools included: - Hex Kit - Torx Block - Smart Kit (5) - 3 Way Spoke Wrench - 3 Way Allen 4/5/6 - 3 Way Allen 2/2.5/3 - 3 Way Wrench Star - Chain Drive - CNC Rod - Classic Chain Rod - Classic Pedal Rod - Power Lever XL - Classic Hex 6mm - Classic Hex 8mm - Splined BB Tool - Cassette Tool
Tough, light, and loaded with features, that's Park's Team Issue Repair Stand. The 3-point leg system and adjustable height (up to 60 inches) creates a stable, ergonomic repair station for easy, efficient wrenching. And, Park's Professional Micro Adjust Clamp quickly clamps nearly any frame tube from 7/8 to 3 inches in diameter, including aero tubes. And the clamping force is fully adjustable for safety. Plus, the clamp has soft, durable rubber jaws that are narrow to fit on even short seatposts and tight areas on a bike. And, the clamp rotates 360 degrees for easy access to any part of the bike. Also, if you're in a hurry, there's a seat cradle for simply hanging your bike too. This great stand folds fast and small for easy transport and storage.
Designed specifically for the home mechanic who wants the best, the AK-3 Advanced Mechanic Tool Kit is a special collection of Park's finest tools, all housed in a tough toolbox. The AK-3 includes over 40 tools to work on a wide variety of current model bikes. A great set of tools a mechanic should not be without. Kit Includes: BBT-9 Bottom Bracket Tool for 16-Notch External Bearing Cups BBT-32 Bottom Bracket Tool for 20-Notch Shimano and ISIS Drive BO-2 Bottle Opener CC-3.2 Chain Checker CM-5.2 Cyclone Chain Scrubber CN-10 Professional Cable and Housing Cutter CNW-2 Chainring Nut Wrench CT-3.2 Chain Tool CWP-7 Compact Crank Puller DCW-1 Double Ended Cone Wrench: 13/14mm DCW-2 Double Ended Cone Wrench: 15/16mm DCW-3 Double Ended Cone Wrench: 17/18mm FR-5.2 Cassette Lockring Tool GP-2 Pre-Glued Super Patch Kit GSC-1 GearClean Brush HXS-1.2 Professional L-Shaped Hex Wrench Set MLP-1.2 Master Link Pliers PAW-12 12" Adjustable Wrench PW-5 Home Mechanic Pedal Wrench RR-12 Tape Measure SD-2 #2 Phillips Screwdriver SD-3 3mm Flat Blade Screwdriver SR-12 Chain Whip 5- to 12-Speed Compatible SW-0 Precision Spoke Wrench: .127" SW-2 Precision Spoke Wrench: .136" TB-2 Emergency Tire Boots TL-1.2 Tire Lever Set TWS-3 Torx Compatible 3-Way Wrench #349 Soft Bristle Soaping Brush
$363.99 - $499.99
Park Tool's Right Hand Bottom Bracket Tap is a replacement tap for their BTS-1 Bottom Bracket Tap Set (sold separately). This tap is used on the non-drive or left side of the bike, which uses a clockwise or "right hand threading." Two taps are required for use.
The PRS-4.2 is a professional quality bench mount repair stand designed and built to withstand the rigors of everyday shop use. Includes three mounting holes, making it possible to clamp as high as 16.25" (41cm) from the bench surface. - Shop quality 100-3C Clamp quickly adjusts to fit any frame tube up to 1-5/8" (41mm) - The clamp jaws are nominally 4 inches (10cm) wide - Clamping height can be raised from 6.5" to 16.25" (92cm to 41cm) above the bench surface - Clamp rotates 360 degrees - Heavy gauge steel tubing - Chrome plated for durability
Park's Deluxe Home Mechanic Repair Stand is an awesome portable stand that's as useful while traveling as it is at home. This versatile stand features Park's shop-quality Micro-Adjust Clamp that handles round and aero seatposts and frames from 7/8-inch to 3-inches in diameter and clamps securely with its quick-release cam and handle that fine-tunes the tension. The clamp also has protective rubber jaws and built-in slots for cables. Plus its jaws are only 2.7 inches tall so they easily fit in narrow areas, like on seatposts that aren't raised much. The Deluxe Stand also boasts a stable base and the top telescopes for putting the bicycle right where you need it to get your work done efficiently. Plus, you can also rotate bicycles 360 degrees and the stand folds for easy carrying and storage.
Park's TS-2.2 Professional Truing Stand has been a staple in bike shops for decades because it's so reliable and easy to use. It accepts all common wheel diameters up to 29 inches with and without tires. It’s made of heavy chrome-plated steel with nylon bushings at pivot points and can be bench-mounted, vise-held or attached to Park's Tilting Base (sold separately). The best feature is that this stand automatically centers rims over the hubs, which saves time repairing and building wheels. Also, installing the wheel and positioning the caliper for truing is quick and easy thanks to the stand's separate knobs for each setting. This is an awesome truing stand that will last a lifetime.
Park Tool's Fork Threading Set is designed for cutting new threads and for chasing existing threads on fork columns that are not chromed. The FTS-1's expandable cutting dies are made from the highest quality high-speed steel for precision cutting and long life. The unique thread guide system used with the FTS-1 is specially designed to allow the metal chips and shavings that result during use to fall completely through the guide, preventing damage to the fork threads and the tool. The FTS-1 includes: • Die handles • 1" x 24 tpi cutting die (Part #606) • 1" cutting guide (Part #610) Accessory dies and guides are also available separately: • 1-1/8" x 26 die (Part #607) • 1-1/8" guide (Part #611) • 1-1/4" x 26 die (Part #608) • 1-1/4" guide (Part #612) Die handles fit all three sizes of dies and guides.
The 791 Reamer Set reamer is used on the PF30 frame shells. The reamer is sized at 45.94mm. The 791 Reamer Set must used with the HTR-1 Head Tube Reamer and Facer, a 750.2 Centering Cone and the 690-XL Facer. The 791 set also includes a pilot that allows a facing-only option of the PF30 frame shell.
Park Tool's 752 Reamer and Spacer Set allows reaming of bottom bracket frame shells in the BB30 standard. The reamer is sized at 41.94mm. It is used with the HTR-1 Head Tube Reamer and Facer and a 750.2 Centering Cone (each sold separately). The set includes a spacer to stop the reaming depth.
Park Tool's Crown Race Cutter Adaptor is used in conjunction with the CRC-1 Crown Race Cutting Tool (sold separately) to machine 39.8mm crown race seats (1.5” standard) on tapered forks with 1-1/8” steerer tubes. It includes a precision-machined adaptor body and a 39.8mm high-speed steel crown race cutter. The CRC-15 will work on forks with a maximum 1.5-inch taper of 4.25 inches.
Page 1 of 15 Next page