The NEO Smart offers the best in power and intelligence and is the quietest indoor trainer currently available on the market. The lack of any physical transmissions means this is the first true direct drive. Road feel is simulated in a highly realistic manner, there is no loss of power. The powerful motor is able to apply resistance up to 2200 Watt and simulate slopes realistically up to 25%. It also speeds up during descents. This ensures the most realistic cycling experience, also during climbs. The lack of any physical transmission, and in turn any parts that could rattle or rub against each other, ensures this trainer is extremely quiet. In addition, this trainer requires no calibration and suffers no wear and tear. Just like other Smart trainers, the NEO communicates using ANT+ and Bluetooth Smart, allowing it to be connected quickly and easily with Tacx apps. Performance data can be viewed on several devices simultaneously, including your smartphone, bike computer and sports watch. When the NEO Smart isn’t connected to a smartphone, tablet or computer, it behaves as a fluid trainer. This means the trainer behaves progressively: when your speed increases, the resistance increases as well. So it is possible to use this trainer in a “stand-alone” status. Furthermore, the Tacx NEO features Plug in/Plug out technology and can therefore be used with and without a plug. When the plug is not in use, the trainer will act as a wireless motor brake. This means the trainer will be not be able to speed up during descents. So you can use this trainer anytime and anywhere, even when you don’t have your smartphone with you. -Software Tacx apps & Third party apps. PC software via upgrade. -Operation Automatic -Resistance unit Direct drive -Realistic slope 25% 1 -Descent simulation To -5% -Max brake power (10 sec.) 2200 Watt -Mass inertia 125 kg 2
The FLUX is a compact and realistic interactive direct drive and is maintenance-free. The swift response of the Smart electronics and the 7kg flywheel transmit the slightest fluctuations in resistance directly and accurately to your legs. With the FLUX we combined direct drive technology with an electro brake in order to offer an accessible Smart and interactive direct drive. This trainer is connected wirelessly to smartphones and tablets and knows the ANT+ FE-C protocol, enabling you to train with Tacx apps as well as third-party apps like Zwift and TrainerRoad. You can also train stand-alone; if you do not connect the trainer, it will simulate a flat road. As the FLUX is a direct drive you simply remove your bike's rear wheel and place it directly on the trainer, step on and start training. • Compatible software: Tacx apps & Third party apps. • Operation: Automatic • Resistance unit: Direct drive • Realistic slope: 10% • Descent simulation: none • Max brake power (10 sec.) 1500 Watt
KICKR power and precision in a simple and stable design. • KICKR at the Core: KICKR CORE delivers a realistic, accurate and quiet indoor training experience by using the proven flywheel technology and advanced algorithms that originated with the iconic KICKR smart trainer. • Designed to Endure: The KICKR CORE was built to the quality that cyclists around the world have come to expect from Wahoo. Made to withstand your most intense training sessions, watt for watt — season after season. • CLIMB Compatible: By pairing KICKR CLIMB to the KICKR CORE you can take your training to another level by integrating real ascents and descents into your workouts. (KICKR CLIMB sold separately.) • Ride Connected: KICKR CORE pairs seamlessly with Wahoo KICKR Trainer Accessories, Wahoo ELEMNT Bike Computers, and Wahoo Sensors along with the most popular apps and software to create the ultimate indoor training environment.
Cycling with a tablet is the new way of training. With the Bushido and a tablet you can even ride outside, as the Bushido is fully wireless. In order to be able to train with the Bushido and iPad, the Tacx Cycling app is needed . This application can be downloaded for free in the App Store. The Bushido for tablet comes with a bracket for mounting a tablet on the handlebar. This handlebar bracket is designed for mounting a tablet on the handlebar. Suitable for handlebars with diameter 26 to 35 mm and adjustable for various image sizes. The design includes a safe distance to make sure sweat doesn’t drip down on the tablet display while training. The motor brake is the most advanced resistance unit that provides the most realistic cycling experience. The resistance is dynamically controlled, it is constantly calculated and adjusted in order to simulate natural road resistance. When calculating the brake resistance all physical formulas a cyclist encounters on the road are applied to reach a true situation. Air and rolling resistance, gradient percentage, weight, air pressure, wind speed, temperature, altitude, inertia and brake properties are all taken into account and calculated hundreds of times per second to achieve a realistic feel. Tacx trainers feature a dynamic control of the braking force. Other trainers use a flywheel to pass the dead centre, Tacx trainers constantly adjust the resistance to simulate the most natural handling. Thanks to the dynamic braking system virtual climbs become real challenges. LED lights The motor brake is equipped with LED lights that move to the rhythm of your cadence. The red lights light up when the power output is high. When the power output is low, the green lights are more visible. Cadence & balance The Bushido works without a cadence sensor. The cadence is derived from the variation in force on the pedals and recorded by highly accurate electronic sensors. Also the balance, the difference in the force exerted between the left and right leg, is measured continuously. With the right balance you will reach an optimal pedal stroke. Tacx Cycling app The Tacx Cycling app for tablets and smartphones are quick and easy to use. With the Tacx Cycling app for tablets you can ride classic cycling races and legendary stages. You can also create your own training programmes and train according to heart rate, slope or power output, or use the pre-set fitness level tests. All your performance data is measured and displayed while you are cycling and stored so you can analyse them at a later stage. The Tacx Cycling app for smartphones allows you to train freely based on heart rate, slope or power output. Your performance data is displayed while you are cycling in form of ‘dynamic’ graphs. The applications for tablets and smartphones can be used in combination with any interactive Tacx trainer, in some cases an upgrade is needed. Complementary app for tablet/smartphone Download the Tacx Cycling app free of charge from the App Store or Play Store. There are applications for iPads, Android tablets, iPhones and Android smartphones. You can order and download Tacx films using a Tacx Cycling app for tablets. The films of the Tacx Cycling app cannot be combined with films of the Tacx Trainer software. Compatibility Tacx Cycling app Apple iPad 3 and higher; iPhone 4s and higher; iPod touch 5; Android version 4.3 and higher.
When the skies open and conspire to spit on a solid day of training, you can sit back and smile—because you're prepared with Wahoo's KICKR SNAP Bike Trainer. It was tucked tidily away in the closet with the clean sheets, just waiting for you. The SNAP keeps you in tune with ANT+ and BLE capabilities so you'll be dialed into smartphones and GPS devices simultaneously or separately. When you're cranking out the watts, the SNAP's super-stable carbon steel frame will not be moved. Your power is clocked at +/- 5% accuracy, so you'd better be sweating if you want those bragging rights. With a road feel this realistic, and access to more third party apps than any other trainer, you might even forget the great outdoors tried to soak you.
The Flow Smart is an interactive smart trainer with an electro brake. It offers intensive training sessions with a wide range of app integration possibilities thanks to its open communication protocol. The electro brake makes this trainer highly accessible and ideal for keeping in tip-top condition during the winter. - Works with Apple and Android tablets and smartphones - Bluetooth and ANT+ FE-C communication capable - Electro brake with 6 powerful magnets - Integrated 3.5 lb flywheel - Maximum resistance 800 Watts - Skyliner front wheel support included - Simulate slopes up to 6% FEATURES - Type of trainer: Interactive Smart trainer with electric brake - Magnets: 6 Magnets - Transmission: Roller, 30 mm - Electrical requirements: 110-240 Volt - Power indicator: None - Connection indicator (ANT/BT): None - Firmware upgradable: Yes - Suitable bikes: Race, Tri & MTB, if necessary with axle skewer, 29? wheel with Tacx trainer tire - Suitable axles: Width of rear fork: Race 130mm, MTB 135mm. Adapters for other widths available - Supplied with: Quick release for road bikes and mountain bikes (5mm), Front wheel support SPECIFICATIONS - Max. power (40 km/h): 800 Watt - Max. slope: 6% - Simulation of descent: No - Max. torque: 15.3Nm - Max. brake force: 45N - Flywheel: Actual of 1,6kg - Mass inertia: 11.8kg - Calibration: Spin down - Footprint (lxw): 675×650mm (26.6×25.6in) - Height: 410mm (16.1in) - Dimensions when folded: 565×410×245mm (22.2×16.1×9.65in) - Weight: 9.41kg (20.7lbs) - Article number: T2240 DATA OUTPUT AND CONTROL - Wireless communication: ANT+ FE-C, Bluetooth Smart open - Control by: Smartphone, tablet, ANT+ FE-C bike computers and stand-alone. Connect to computer via ANT+ antenna - Output: Speed, cadence and power - Read out on: Smartphone, tablet, bike computer, sports watch, computer with ANT+ antenna - Accuracy: <5%
The Road Machine | Smart trainer combines our benchmark fluid trainer with inRide sensor technology to put app-based power training at every rider's finger tips. With the Road Machine | Smart, you'll get a wide range of workout options: from intervals to threshold work to recovery spins, combined with smooth, road-like resistance. Our solid frame design is durable, stable and warrantied for life. Pre-installed on the Road Machine | Smart, inRide sensor technology allows riders to connect to the Kinetic inRide app and begin a power training program. No additional on-bike sensors are needed, only a smart device that supports apps and the Bluetooth Smart® communication protocol. The Kinetic inRide app keeps you on track with built-in workouts with target-effort levels tailored to individual riders and easy upload of workout data for analysis. The freedom of user-programmable displays, a built-in workout creator, and data features as rich as a power meter costing hundreds more place the Kinetic inRide app in a class of its own. Take control of your training with the Kinetic Road Machine | Smart. Kinetic inRide app available for free in the iTunes App Store and Google Play Store.
The Satori Smart trainer uses complex technology in a user-friendly fashion. The resistance is set manually with the handlebar resistance lever offering 10 different resistance positons, from very easy to very strong. The Satori Smart can communicate via both ANT+ as well as Bluetooth® Smart. In the resistance unit an accurate measurement of your speed, cadence and power is performed. This data is then shown on the screen your using, whether this is a tablet, smartphone, sportwatch, or something else. During or after a training session you, or your coach, can thus monitor your performance closely. Since the Satori is not hooked up to the power net, you can use this trainer anytime and anywhere, also when you don’t have your smartphone with you. Software Tacx apps & Third party apps. PC software via upgrade. Operation Handlebar resistance lever Resistance unit Magnetic Realistic slope 10 positions Descent simulation No Max brake power (10 sec.) 950 Watt Sprint power (1 min.) 800 Watt Mass inertia 16.93 kg 1 Suitable for all bikes, if necessary with axle skewers or nuts Wheeldiameter 26"- 29" and 700c; 29" with trainer tyre
Kurt Kinetic’s Road Machine 2.0 Fluid Trainer features a fluid-based unit for smooth, progressive resistance that matches your effort for a true outdoor simulation. With a 6.25 lb. flywheel and a sealed fluid chamber pushing back, you get a natural resistance feel and a lower operating temperature for consistency to 3000 watts and beyond. When it's time to store or transport the unit, simply fold up the legs and tuck it away. And, thanks to the 2 1/8-inch roller, tire wear is reduced significantly.
Prepare yourself in a professional manner and get your body in top condition with the Booster, the top model of the Tacx cycletrainers. Even at low speed the powerful magnetic brake generates high resistance; the maximum resistance is 1050 Watt. This makes the Booster highly suitable for simulating climbs and for interval training with short, intense sprints. The handlebar resistance lever allows you to set the level of resistance by selecting one of ten different positions. The brake is easy to assemble so you can get started straight away. The professionals with whom Tacx cooperates use the Booster for warming up for time-trials and other important stages. ‘‘The Booster gives me the same feeling like I have on the road”, says multiple time-trial world champion Tony Martin. Software PC/laptop - Operation Handlebar resistance lever Resistance unit Magnetic Braking positions 10 Descent simulation - Max brake power (10 sec.) 1050 Watt Sprint power (1 min.) 900 Watt Mass inertia 9,18 kg 1 Suitable for all bikes, if necessary with axle skewers or nuts Wheeldiameter 26"- 29" and 700c; 29" with trainer tyre
The Blue Matic has been a Tacx offering for many years and is a very popular trainer. During your training session you can use the handlebar resistance lever to adjust the resistance as needed. The Tacx Blue Matic Smart is bundled with an ANT+/BT speed & cadence sensor to allow connection with tablets or smartphones, and allows use of interactive software and applications. Train with the Tacx Training app, Tacx Cycling app, Zwift, or TrainerRoad! - Stable and robust footprint - The bike is fixed in the trainer easily by two simple clicks - Handlebar resistance lever with 10 positions - Brake system with 2 X 8 permanent magnets - 2.5lbs flywheel - Maximum resistance 700 watt - Easy to assemble brake system FEATURES - Type of trainer: Basic trainer with magnetic brake - Magnets: 2x8 Permanent ferrite magnets - Transmission: Roller, 30 mm - Electrical requirements: No mains voltage required - Power indicator: None - Connection indicator (ANT/BT): None - Firmware upgradable: No - Suitable bikes: Race, Tri & MTB, if necessary with axle skewer, 29? wheel with Tacx trainer tire - Supplied with: Quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS - Max. power (40 km/h): 700 Watt - Max. slope: n.a. - Simulation of descent: No - Max. torque: 12.2Nm - Max. brake force: 36N - Flywheel: Actual of 1.25kg - Mass inertia: 8 kg (17.6 lbs) - Calibration: n.a. - Footprint (lxw): 640×635mm (25.2×25.0in) - Height: 440mm (17.3in) - Dimensions when folded: 610×420×250mm (24.0×16.5×9.84in) - Weight: 8.40kg (18.5lbs) - Article number: T2650.VP DATA OUTPUT AND CONTROL - Wireless communication: None - Control by: Handlebar resistance lever with 10 positions - Output: n.a. - Read out on: n.a. - Accuracy: n.a.
Kinetic's Trainer Mat is a simple necessity for any cyclist who cherishes a clean training environment. It keeps floors clean and sweat-free and reduces vibration. Durable closed-cell PVC foam means it will stand up to even the most intense training sessions.
$54.99 - $69.99
Kurt Kinetic's 12mm Traxle Through-Axle lets you attach your mountain bike to a Kinetic trainer without changing the original skewer. Three different thread pitches ensure a perfect fit for whichever axle you're using.
CycleOps' Sweat Guard is a valuable accessory for any trainer. It keeps corrosive sweat from harming your bike and home. It's made from soft, absorbent, washable terry cloth and is attached with elastic and Velcro straps. Two front pockets keep the remote, phone, or food close by while you're hammering away.
- Stable front wheel stand - Slots for 700c, 650c and 26-inch wheels - Use with Trakstand Mag 3 to level bike - Use with other trainers to raise handelbars
Kurt Kinetic's Skewer is an affordable, steel quick-release that perfectly fits into all Kurt Kinetic trainers. Use it instead of your nice aluminum quick release so it stays in pristine condition. • 130mm width
Page 1 of 1