Chainrings

Our premium 1X RaceFace Boost 148 direct mount compatible Oval chainrings are designed for CINCH system RaceFace uses to mount chainring directly to the crank. This version is for BOOST 148 specific bikes and FAT BIKES (when reversed).

The Original one and only absoluteBLACK premium Sram compatible Direct mount BOOST148 1X Oval chainrings are designed for GXP and Long BB30 spindle cranks. Chainring is dedicated for Boost148 bikes ONLY. Converts a regular Sram crank into a Boost specific setup. (3mm offset). They are also 100-percent optimized for Eagle.

Looking for a 1X chainring for your new Shimano XT, SLX or Deore crankset with the proven chain retention of our Drop-Stop® chainrings? Wolf Tooth has what you need in the form of a beautifully machined asymmetrical 96 mm BCD that provides the ideal 1X chainline of 49mm. Compatibility: These rings fit on the Shimano XT M8000, SLX M7000, Deore M6000, or FC MT5100 1x or 2x cranksets Not compatible with Deore triple (3x) cranksets If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). Provide a great chainline on most Boost bikes. See this explanation for details. Standard crank chainline - (48 mm for 26-28T), (49 mm for 30-34T) and (50 mm for 36-38T) Boost crankset chainline - (52 mm for 30-34T) and (53 mm for 36-38T) 10mm bolts are optimized for mounting this ring Available in two different tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains.

- Shimano, 22T, 9 sp, BCD 64mm, 4-Bolt, Deore FC-M590, Inner Chainring, For 22/32/44, Steel, Black, Y1LD22000

Shimano SLX M660 9-Speed chainrings get your drivetrain back to optimal operation.

Shimano SLX M7000 10-Speed chainrings get worn out drivetrains back in like-new condition.

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.

- Shimano, Tiagra FC-4703, Chainring, Teeth: 30, Speed: 10, BCD: 74, Bolts: 4, Inner, Steel, Grey, Y1RD30000

• CNC machined from 7075-T6, one of the strongest alloys available today • Outer rings are made from 4mm thick material & inner ring from 5mm thick material for unsurpassed durability • Rings feature our patented S.H.I.F.T. technology, featuring hard-wearing steel S.H.I.F.T. chips for dual action up-shifts

- Chainrings for SLX FC-M675 double cranks - Please refer to compatibility: 38T chainrings are available for 24T or 26T inner chainring and are not cross-compatible.

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

- Shimano, GRX FC-RX810 2x11, Chainring, Teeth: 31, Speed: 11, BCD: 80, Bolts: 4, Inner, Aluminum, Black - Shimano, GRX FC-RX810 2x11, Chainring, Teeth: 48, Speed: 11, BCD: 110, Bolts: 4, Outer, Aluminum, Black

SRAM 94 BCD narrow-wide chainrings for X01 and X1 cranks. Our NSB narrow-wide rings are CNC machined in Canada and feature a durable tooth profile that virtually eliminates chain drop. Note: The 28T – 94 BCD ring does not use the OE screws. The NSB 28T ring requires 4x M8 x 0.75 x 10mm long bolts. These are commonly available at your LBS and are the most commonly used bolt and nut combination to mount chainrings to cranks. All other sizes, 30T–36T, use the OE screws. Specifications: - 94mm Bolt Diameter Circle (4-bolt 94 BCD) - Bottom Bracket Types: BB30 & GXP - Chainline: 28T is 48mm / 30T–36T are 49.5mm - Machined from solid 7075 T6 Aluminum - Anodized Black with Laser Etched Graphics - Compatible with all 9, 10, 11, & 12-speed SRAM drivetrains - Compatible with all 9, 10, & 11-speed Shimano drivetrains Precision CNC Machined in Whistler, BC Weight: 28T – 40g 30T – 37g 32T – 42g 34T – 55g 36T – 65g

Shimano 105 5800 11-Speed chainrings replace worn out parts and get your drivetrain running smoothly again. - Drivetrain Speeds: 11 - Chainring BCD: 110 asymmetric

Rugged durability comes naturally to the stamped steel Eagle T-Type direct-mount chainring. With bash guard compatibility and availability in three different tooth counts, there is ample room to refine and customize your bike’s look and feel. Features - Silver chainrings available in 8-Bolt direct mount - Black chainrings available in 3-Bolt direct mount - Stamped Steel construction - 30-34tT range - +3mm offset - Compatible with T-Type chains - Bashguards compatibility shared with GX and X0 T-Type chainrings.

The EX1 drive train was designed specifically for the demands of electric-assist mountain bikes: a wide gear range with bigger jumps between gears and sturdy components to handle higher torque loads. Liberal use of features found on SRAM’s high end MTB parts provide high value, quiet operation and ease of service. - X-Sync (wide-narrow) tooth profiles for great chain management - Compatible with Bosch mid-drive E-bike systems - Material: Steel - Size/BCD: Direct mount - Recommended Group: EX1

Shimano Sora 9-Speed replacement chainrings gets your drivetrain operating smoothly again.

- Thick-thin tooth design for maximum chain engagement - Heat-treated forged steel - BCD: 82mm - Optimized for 11-12 speed system - Compatible with Gamma Pro and Alpha Drive 1x crankset

The SRAM X-Sync Steel 1x chainrings are the perfect replacement ring for the cost conscious with added durability of steel. The same SRAM X-Sync technology at a price well below competitors’ imitation “narrow wide” rings. Best performing chainrings at the best price. - Compatibility: Compatible with all SRAM 1x cranks, DM 28-tooth ring is not compatible with 30mm cranks that require a 0mm offset ring

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

Genuine replacement parts Get back on your bike with these replacement chainrings. Replacement chainring for your eBike. - Compatible with Bosch Gen 3 - Without spider and bash guard - For assembly on spider with mini ISIS axle interface - 104mm BCD

Rugged durability comes naturally to the stamped steel Eagle T-Type direct-mount chainring. With bash guard compatibility and availability in three different tooth counts, there is ample room to refine and customize your bike’s look and feel. Features - Silver chainrings available in 8-Bolt direct mount - Black chainrings available in 3-Bolt direct mount - Stamped Steel construction - 30-34tT range - +3mm offset - Compatible with T-Type chains - Bashguards compatibility shared with GX and X0 T-Type chainrings.

64BCD chainring for MTB cranksets

Replace worn-out chainrings or change out gearing with SRAM's Yaw Compatible Inner Chainring. This solid ring is crafted from aluminum using SRAM's X-Glide tooth profiles for quick, responsive shifting. This chainring works for SRAM's Yaw front derailleurs on both 10- and 11-speed drivetrains. The 42-tooth version works best when paired with a 55- or 54-tooth big ring.

Shimano 105 FC-R7000 asymmetric 110 BCD chainrings for 2x11 drivetrains.

- Shimano, 48T, 8 sp, BCD 104mm, 4-Bolt, FC-M361, Outer Chainring, For 28/38/48, Steel, Black, Y1KN98060

Deore M6000 series 10-speed chainrings provide smooth and reliable shifting, ideal for off-road riding conditions. - Shimano HG-X technology - Compatible with 4-arm crank design

Rugged durability comes naturally to the stamped steel Eagle T-Type direct mount chainring. With bash guard compatibility and availability in three different tooth counts, there is ample room to refine and customize your bike’s look and feel. - Silver chainrings available in 8-Bolt direct mount - Black chainrings available in 3-Bolt direct mount - Stamped Steel construction - 30-34tT range - +3mm offset - Compatible with T-Type chains - Bashguards compatibility shared with GX and X0 T-Type chainrings.

Replacement PowerGlide ring for 11 speed crankset. - Compatible with Asymmetrical Yaw front derailleurs - Bolt Circle Diameter (BCD): 110 BCD - Material: Aluminum

Eagle Technology creates the smoothest, quietest, longest lasting and most efficient drivetrains SRAM has ever made. The radical new look and feel of the X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with Eagle chains to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. The complete Eagle system—crankset, chainring, chain, shifter, derailleur and cassette—is designed, tested, and proven to deliver the ultimate mountain bike drivetrain. Put simply, Eagle is capable of revolutionizing the ride for all riders on every kind of terrain. - Designed to be used with Eagle chain - Material: Steel

The SRAM X-Sync STEEL 1x chainrings are the perfect replacement ring for the cost conscious with added durability of steel. The same SRAM X-SYNC technology at a price well below competitors’ imitation “narrow wide” rings. Best performing chainrings at the best price. - Drivetrain Speeds: 10 , 11 - Material: Steel - Ring Position/Type: Single - Weight: 110 grams (32t), 96 grams (30t),

Dimension Chainrings. - No ramps, pins, or shift aids

The X-SYNC 2 Bosch Direct Mount Chainring is built with the needs of E-MTB riders in mind, and incorporates the same X-SYNC 2 Eagle chain management technology found in every SRAM 1x drivetrain. - Sharp, narrow tooth profile and rounded chamfer edges help manage a deflected chain - Mud-clearing recesses - An integral component of the SRAM 1x drivetrain - Speeds: 12 - Material: Steel

Shimano Ultegra R8000 Series Chainrings are designed for use with Shimano's 11-speed Ultegra crankset.

- Trushift chainrings feature shift ramps and pins - Drivetrain compatibility: 8, 9, 10, 11 - 104mm BCD

SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.

These direct-mount chainrings coincide perfectly with the Comet Modular Crank. The megatooth design allows you to put all of your power through without worrying about dropping your chain. All sizes of these chainrings are steel and range from 26T to 38T. - Megatooth thick thin tooth design for Shimano 12sp mountain chain engagement - Direct mount FSA modular crank model-specific rings - Optimized new 11-speed system

This direct mount chainring coincides perfectly with the Comet Modular Crank. The megatooth design allows you to put all of your power through without worrying about dropping your chain. - Long tooth profile enhances chain retention - Thick-Thin tooth design for maximum chain engagement - Laser-etched logos

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains. - 104mm BCD - Material: Aluminum

Shifting performance has helped Full Speed Ahead to become a world leader for high-end chainrings. No one studies the design and manufacturing of each system, and each tooth, as carefully as we do. Our dedication shows in every revolution of the crank, and every perfect shift achieved. To meet or exceed the needs of any drivetrain, Full Speed Ahead has developed sophisticated design, testing and manufacturing protocols. This allows Full Speed Ahead to match your needs as perfectly as our chainrings match a chain. We offer more options, levels, and finishes than our competitors. We use the best materials available, imported from the USA, Europe, or sourced from our qualified vendors in Asia, to guarantee the durability, performance, and appearance will out-perform, and outlast the competition. Full Speed Ahead chainrings have powered multiple World, Tour de France, and Olympic champions, and will exceed your expectations. - Stamped AL7075/T6 - Chainrings are compatible with all 10-speed drivetrains, and compatible with FSA, SRAM, and Shimano 11-speed drivetrains - Drivetrain Speeds: 11, 10

A tight and consistent 13-tooth gap between chainrings delivers accurate and dependable shifting and is the core of our X-Range gearing. Our smaller chainrings paired with wide-range, 10t-start cassettes provide more efficiency and more time in the big ring. It's modern gearing for today's riders. - Crisp and accurate front shifts - Durable finish - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear

Genuine replacement parts Prowheel: Crank it up! Shift smooth, use matching chainrings. - Bosch Generation 3 specific e-bike narrow wide chainring - Aluminum spider and steel chainring -104mm BCD

Get your bike back on the road with new chainrings. Replacement chainrings for your Bosch Gen 4 equipped bike. PRODUCT DETAILS - BCD 94mm - Includes spider - Compatible with Bosch Gen 4 drive units - Prowheel: Crank it up!

The radical new look and feel of SRAM's X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with the Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise and wear. - Can be used with Eagle 12 speed or SRAM 11 speed chains - Direct mount rings with 3mm offset fit Boost geometry Eagle cranks; direct mount rings with 6mm offset fit traditional geometry - Eagle cranks and GXP spindle XX1, X01, X0, X1 and X9 cranks

Shimano Dura-Ace 9000 11-Speed Chainrings. - Chainring BCD: 110 Shimano Asymmetric - Color: Black - Defined Color: Black - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Inner

SLX SM-CRM75 stiff and lightweight chainring delivers smooth pedaling over bumpy terrain. The SM-CRM75 chainring features SHIMANO DYNAMIC CHAIN ENGAGEMENT+ technology, which features special gear teeth profiles that deliver exceptional chain engagement and chain retention. - Special MTB gear teeth profile improves chain engagement and retention - Exchangeable single/double chainring - Crankset can be used as common component - Superior chain retention - Rider tunable

Get your bike back on the road with a new chainring. - For use with 1-piece crank - Steel construction Specifications: - Size: 44t, Direct mount - Speed: 1 - Material: Steel

Genuine replacement parts. Original Prowheel chainring. Details: - Replace your worn-out chainring - Compatible with Prowheel crankset: TK01-42T-TT-1 - Chainline: 49.6mm - With Narrow/Wide teeth - With plastic chainguard

Truvativ, 52T, 10 sp, BCD 110mm, 5-Bolt, Outer Chainring Steel.

- Shimano, Tiagra FC-4703, Chainring, Teeth: 39, Speed: 10, BCD: 110, Bolts: 4, Middle, Aluminum, Grey, Y1RD98050

The Shimano R9100 series crankset achieves the ultimate in optimal power transfer. It does this through a reinforced chainring on its unique asymmetrical four-arm spider construction. - Chainring BCD: 110 Shimano Asymmetric - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Inner

FSA Pro Road Chainrings deliver flawless shifting for any road drivetrain. - Precision CNC machined AL7075/T6 alloy

FSA Super Road Chainrings are designed to provide flawless shifting, with minimal weight and unmatched durability. - Precision CNC machined AL7075/T6 alloy - N-11 chainrings are compatible with all 10 speed drivetrains, and compatible with FSA, SRAM and Shimano 11- speed drivetrains

RaceFace Narrow Wide Hyperglide+ 1x chainrings are made of 4mm thick 7075-T6 alloy plate for stiffness and strength. - Only compatible with Hyperglide + chains - Designed for use with 12-speed Shimano drivetrains - Narrow Wide tooth profiling ensures consistent chain retention

The logic was designed with our team riders who needed a simple, good looking but strong and dent-resistant sprocket for all kinds of riding. Available in 25T and 28T with adaptors to fit any crank on the market, many of the team can be found riding the logic sprocket this season. MATERIAL: - Full CNC 6061-T6 alloy THICKNESS: - 6.35mm SIZES: - 25T, 28T SPECIAL FEATURES: - Team designed sprocket - Adaptors to fit 19/22/24mm cranks - Thicker spokes for increased strength

Replace worn out chainrings or change out gearing with SRAM's RED X-Glide Chainrings. These solid rings are crafted from aluminum using SRAM's X-Glide tooth profiles for quick, responsive shifting. If you have a SRAM RED 10-speed Exogram compact crank, these are the rings for you. RED Exogram cranks have a hidden 5th bolt behind the crank arm

Designed for use with a 104 BCD interface of any 104 BCD spider, This chainring utilizes SRAM's T-TYPE design and is backwards compatible with Eagle technology (X-SYNC II). SRAM drivetrain engineers optimized this ring to combat the high-torque, high-wear situations e-bike riders face. The aggressive tooth design provides better chain retention for a smoother, more efficient pedal feel with a focus on long wear-life. - High durability steel construction - Backwards compatible with other Eagle Technology - AeroGuard compatible with steel rings that Fufills EN 15194:2017 standard

Engingeered to interface with Bosch motor systems, SRAM drivetrain engineers optimized this ring to combat the high-torque, high-wear situations e-bike riders face. The aggressive T-Type tooth design provides better chain retention for a smoother, more efficient pedal feel with a focus on long wear-life. - Steel (36T,38T). - AeroGuard Compatible that fufills EN 15194:2017 standard - Backwards compatible with other Eagle Technology.

Rugged durability comes naturally to the Eagle T-Type direct mount chainring. Finished with a distinct, dual-spoke design your shifting will never be compromised. Available in three different tooth counts, there is ample room to refine and customize your bike’s feel. - 8 Bolt direct mount - 30-38T range and +3mm offset variants - Compatible with T-Type chains