Drop

The all-new Rapide Cockpit is a lot more than just the fastest way to the finish line. It's the fastest leading edge we've ever made, putting aero gains in the clean air, where they matter most and shaving four watts off the already ultra-quick two piece Rapide Bar and Tarmac SL7 Stem. But to deliver a leading edge that provides a winning edge takes more than pure aero. The goal for the Roval engineering team was simple—the Rapide Cockpit had to be the fastest bar we've ever made, with no compromises. It's aero, light, stiff, and designed hand-in-hand with the best riders in the world and our Retül fit experts so you can get a grip on victory. AERODYNAMIC: Removing the cluster of hardware (where stem and handlebar connect) allowed us to design the bar's leading edge a single airfoil. We optimized this airfoil to provide a maximum advantage in clean air at speeds seen from long solo breakaways to full gas World Tour sprints. While a four watt improvement may seem small, it adds up to a 32cm lead over a 250m final sprint. When races are won by bike throws, this is a winning difference. LIGHT AND STIFF: By removing the stem's hardware cluster the Rapide Cockpit is 50 grams lighter (100mm x 420mm) than a two piece Rapide bar and Tarmac SL7 combo. Made from premium high-modulus carbon fiber, that delivers ideal stiffness for the biggest, fastest sprinters on the World Tour, the Rapide Cockpit has a higher stiffness-to-weight ratio than any two piece system we've ever made. FIT: The downside of one-piece cockpits has long been fit, but we partnered with our Retül fit professionals and the best riders in the world to ensure almost every rider can find their fit. We offer 15 different stem and bar combos, all at -6 degree, so we've got your race day position covered. The radius from tops to drops has been sculpted for wrist clearance whether out of the saddle in a final sprint or tucked in an aero position, while bend and flare reflect our favorite Rapide bar. - Aerodynamically engineered to save 4 watts vs a traditional aero road bar - Material: Premium High Modulus Carbon Fiber, Titanium Stem Bolts - Sizes: 15 combos from (75mm x 380mm) to (125mm x 440cm) - Bend: 125mm drop x 75mm reach, 4 degrees of flare at the drops - Stem Angle: 6-Degrees - Steer Clamp Diameter: 31.8 - Weight: 310 grams (100mm x 420mm) - Cable Routing: Shimano, SRAM, Campagnolo ( Internal/Electronic Compatible) - Compatible with Roval bolt on computer mount, S219900058. - System Weight Limit: 275lbs/125kg

Engineered for endurance riding, the ultra-lightweight Contact SLR D-Fuse handlebar offers compliance and ergonomic fit for the most demanding conditions. FEATURES: - Proprietary D-Fuse shaping on the tops for superior compliance and lightweight. - 8-degree flare in the shallow drops puts the hand and wrist in a comfortable and efficient position. - Compatible with Contact SLR and SL Aero and AeroLight stems for full internal cable routing. - Ergonomically shaped contact points fit the hand and palm from various angles, alleviating fatigue and numbness that can occur over long miles. - Precision composite lay-up for optimal weight and stiffness. - 40% more compliant and 15 grams lighter than the previous Contact SLR D-Fuse handlebar. SPECIFICATIONS: - Weight: 185g (420mm) - Bar Clamp Diameter: 31.8mm - Width: 380/400/420/440mm - Reach: 125mm - Drop: 72mm - Rise: 0° - Backsweep: 0° - Outsweep: 0° - Flare: 8° - Material: Carbon

- Ultra-light carbon composite reduces the weight while maintaining a stiff construction - Short reach and shallow drop for instant transition from the tops to the hoods to the drops - The round-shape clamping design ensures better fitting adjustments for hand and body positions - The center of clamping area meet with handlebar top seamlessly to improve aerodynamics while saving weight - An aero-optimized flattened top section reduces the front face area and improves the airflow - The edge of the handlebar top features a wider and lifted shape for better aero position - Elliptical drops improves bar stiffness without adding weight - Cable openings features a bigger opening making routing easier

Designed for gravel racing and fast all-road riding, the Aeroghiaia combines speed, control, and comfort. The speed comes from our aero profile, finally giving you road-bike speed on all possible terrain. Control is enhanced thanks to the flared drops, but the key benefit of the Aeroghiaia is comfort. The aero wing shape provides a large surface for your hands to spread the load, while the multi-angle drops keep the brake hoods vertical (instead of weirdly-angled on regular flares) for comfort. Multi Flare: The Aeroghiaia combines our award-winning Superego grip with a multi-angled flare. The top section of the drop is standard so the hoods are angled as intended, while the lower section has an extreme flare for optimal control. Center Wing: The wing's cross-section is aerodynamic yet comfortable, in particular, when you rest your thumb on top of the bars parallel to your index finger. - Unidirectional carbon—-ultralight layup - Internal cable channels - Stem torque, 4-bolt: 6Nm max. - Stem torque, 2 bolt: 8Nm max. - Shift/brake lever torque: 8Nm max. - Clip-ons: Not compatible (this would require a longer round center section and increase aero drag) - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A

Designed for the most comfort and control on a gravel bike. The Superghiaia shape is optimized for comfort regardless of where you hold it. The center section comes straight from our award-winning Superergo comfort bar, while the corner grip adds a new position of great comfort while climbing. The top section of the drops curve straight down so the hoods are in the most comfortable position, while the extreme flat under the hood creates a wider hand position. All these comfort features also increase control, as a proper grip on your handlebars helps you maneuver better, while the bottom flat and wide hand position gives you more leverage. Multi Flare: The Superghiaia combines our award-winning Superergo grip with a multi-angled flare. The top section of the drop is standard so the hoods are angled as intended and the lower section has an extreme flare for optimal control. Center Section: The center section is borrowed from our industry-leading Superergo bar, including the corner grip that gives you an extra hand position. Especially on long rides, having multiple hand positions improves comfort. - Unidirectional carbon—ultralight layup - Internal cable channels - Stem torque, 4-bolt: 6Nm max. - Stem torque, 2 bolt: 8Nm max. - Shift/brake lever torque: 8Nm max. - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A

With Versatile Contact Position drops that feature an 8-degree flare, 3-degree outsweep and 40mm tails, the CADEX AR Handlebar sets a new standard for all-road control. A 70mm reach and shallow 115mm drop make it easy to transition from the tops to the hoods and drops. And an innovative one-piece mold construction boosts strength and stiffness while still maintaining a best-in-class weight. - 8-degree flare and 3-degree out sweep provide total control over variable surfaces. - Extended 40mm tails on the drops add stability and leverage for increased confidence when sprinting or descending. - 3-degree backsweep delivers increased comfort and balance on the tops. - A 70mm reach and shallow 115mm drop allow quick and controlled transitions between the tops, the hoods and the drops. - One-piece, no-bond mold manufacturing process reduces weight and increases strength and stiffness. - Precision carbon fiber layup provides added strength at minimal weight. - Compatible with Shimano Di2 Bar End Type Junction.

Superlight weight for a competitive edge. Comfort to carry you through long training days and crushing queen stages. The all-new CADEX Race Handlebar features innovative one-piece construction and an ergonomic design that’s stiff, responsive and easy on your hands.

- D-shaped composite tubing - 6% lighter than Contact SLR Compact handlebar - 10% more "pushing" compliance compared to Contact SLR Compact handlebar for a smoother ride quality - 30% more "pulling" stiffness compared to Contact SLR Compact handlebar for cornering, sprinting, and climbing efficiency - Drop 125mm - Reach: 72mm

COMPACT, LIGHT & COMFORTABLE The all-new Contact SLR handlebar is a full carbon handlebar with updated ergonomic shaping and revised compact geometry that provides maximum compliance and superior handling at a feather-light weight. FEATURES - Short reach and shallow drop for instant transition from the tops, to the hoods to the drops - Easy-to-grip elliptical drops boost bar stiffness without adding weight - A wider, curved top section adds vertical compliance and delivers a smooth ride - Purpose-designed ergonomic shaping of the top of the bar provides maximum hand comfort and support for long rides

- D-shaped composite construction. - Provides better "pushing" compliance for a smoother ride quality. - Provides better "pulling" stiffness for cornering, sprinting and climbing efficiency. - Drop 125mm. - Reach: 72mm. - Backsweep: 5 degree. - 8 degree flare.

Wind is the ultimate cruelty, and nowhere is it more keenly met than at the leading edge of your bike. Want to save an easy 20 seconds over 40 kilometers? Get a set of Rapide handlebars. Leveraging our countless hours of Win Tunnel testing, we designed the Rapide bar to cut through the wind with knife-edge efficiency, and at the same time, provide the utmost comfort while hammering at the front. A textured surface on the tops ensures secure and comfortable grip, even when wet; there's a recessed step that sets the bar wrap flush with the tops; the airfoil is offset forward to offer greater forearm and knee clearance; and, at 225 grams, the Rapide is the lightest aero bar in its class. Aerodynamic performance without compromise. This is the leading edge. - Aerodynamically engineered to save 20+ seconds over 40km vs. a round bar - Optimized blend of high modulus carbon fiber materials yields lightest-in-class aero bar at 225g (size 42cm) - Innovative features, like textured tops and a smooth bar tape step, enhance your experience - Bend: 125mm drop x 75mm reach

Light weight, comfort, and strength: the new SL-70 Ergo is the ultimate handlebar for long days in the saddle. The SL-70 Ergo combines the flat bar top shape of the beloved Contour SL bar with numerous modern features sought after by riders and pro bike fitters. The SL-70 Ergo sports a 70mm reach and 128mm drop. The short 70mm reach has been a popular choice in recent years, as it allows bike fitters flexibility in achieving a comfortable position without sacrificing steering control. The drop utilizes a variable radius, allowing for multiple hand positions and deeper movement into the drop. As a result, reach to the brake lever is shorter. A 3° backsweep on the flat tops keeps the wrist in a comfortable position, essential for long days on pavement or gravel, while the 10° ramp angle provides a smooth transition to modern shifter hoods. Brake and shifter housing is elegantly hidden along the underside of the bar. - Updated distinctive Zipp cosmetics - Unidirectional carbon built for stiffness, comfort, and light weight - Flattened top shape with 3° backsweep for comfort - Variable radius drop for multiple hand positions and deeper movement into the drop. - Lifetime warranty

In terms of both comfort and performance, anywhere that your body touches the bike is of the utmost importance. That's why Specialized designed the S-Works Hover Carbon Handlebars to excel on both fronts. Starting with the construction, they're made from their FACT carbon fiber for a light overall weight, vibration absorption, and high rigidity. And for comfort, much of it boils down to fit. Along these lines, they feature a shallow drop and bend that's extremely comfortable, while they also offer a 15mm rise to help accommodate a wide fit range. - FACT carbon construction offers an optimized blend of durability and light overall weight. - 15mm rise for additional rider fit range. - Shallow Bend Drop: 123mm Drop x 75mm Reach

A high performance bar, ideal for smaller hands or for riders that spend the majority of their time climbing. An ergonomic top perch with smooth transitions alleviate pressure on hands and greatly improve comfort. - Bar Width (center-to-center): 36/38/40/42/44cm - Clamp Diameter: Oversized 31.8mm - Ergonomic top perch alleviates pressure on hands. - FACT carbon construction offers an optimized blend of durability and light weight. - Front of bar optimized for dual-cable routing. - Shallow Bend Drop: 123mm drop x 75mm reach - Shallow bend drop design. - UCI legal, compatible with Shimano, SRAM, and Campagnolo controls. - Weight: 200g (42cm)

Contact points—those spots where our bodies meet our bikes—are crucial areas for comfort and control. Get it wrong, and even the best bikes can be miserable to ride. We developed the new Terra handlebar to be the paragon of comfort, control, and performance, with an optimized blend of carbon fiber and advanced construction techniques yielding exceptional ride comfort, precise handling, and class-leading strength at an impressively low weight. A shallow drop and moderate reach combine with a 12-degree flare for optimal all-terrain comfort and control. - Optimized blend of high modulus carbon fiber materials and advanced construction techniques yield a light and confident bar - Ergonomic top perch alleviates pressure on the hands - Bar flared 12 degrees at the drops for added stability - Bend: 103mm drop x 70mm reach

Zipp Service Course SL 80 Ergo handlebar is all about making you faster in style and comfort. The bar offers an 80mm reach and 125mm drop, perfect for a rider looking for a medium reach and shallow drop who likes reaching down to, rather than into, the drops. This bar has a flattened top and 3° backsweep for a neutral wrist position on the tops. The bars feature a 7° ramp angle for a flat transition to the hoods and a 4° outsweep at the drops. In addition to the ergonomic benefits, the Service Course SL 80 Ergo is our first ergo bar to be clip-on compatible. Made of 7050 aluminum, the Service Course SL 80 Ergo weighs 275g for a 42cm-wide bar. Light weight, stiffness, and comfort: the Zipp Service Course line provides the right fit for all rider types. - Distinctive Zipp cosmetics - 7050 aluminum for light weight and durability - 80mm reach and 125mm drop for a medium-high position - Flattened top shape with 3° backsweep for comfort - Clip-on Compatible (40, 42, 44cm sizes only) - Di2 RS910 junction compatible - Lifetime warranty

3T started life as a master drop bar manufacturer. Nobody else had the same technical ability to manipulate tubing, and thus 3T became the first company to focus on more ergonomic (i.e. more complex) shapes. The previous generation, the Ergonova, was lauded worldwide as the top ergonomic bar. In fact, it was so good, we didn't touch the center section at all when designing the new SuperErgo. We did change everything else though, ensuring the SuperErgo will continue 3T's streak as the ergo bar of choice for road cyclists. Drop Grip: The gradual change in curvature makes the grips comfortable for hands of all sizes. The tighter top bend ensures the newest Shimano, SRAM, and Campagnolo shift/brake levers align perfectly for a very comfortable hand position on the hoods. Center Grip: When we surveyed our customers about their desires for this new ergonomic bar, amateur and professionals alike pleaded with us not to change this area at all. It's that comfortable. So we left it alone. - Alloy 7050 - External cable grooves - Stem torque: 6Nm max. - Shift/brake lever torque: 8Nm max. - Clip-ons: Compatible - Di2 compatibility: Not compatible

- Alloy construction - Short reach and shallow drop for instant transition from the tops to the hoods to the drops - The round-shape clamping design ensures better fitting adjustments for hand and body positions - The center of clamping area meet with handlebar top seamlessly to improve aerodynamics while saving weight - An aero-optimized flattened top section reduces the front face area and improves the airflow - The edge of the handlebar top features a wider and lifted shape for better aero position - Elliptical drops improves bar stiffness without adding weight - Cable openings features a bigger opening making routing easier

FEATURES - Alloy construction - Short reach and shallow drop for instant transition from the tops, to the hoods to the drops - The round-shape clamping design ensures better fitting adjustments for hand and body positions - The center of clamping area meet with handlebar top seamlessly to improve aerodynamics while saving weight - An aero-optimized, flattened top section reduces the front face area and improves the airflow - The edge of the handlebar top features a wider and lifted shape for better aero position - Elliptical drops improves bar stiffness without adding weight - Cable openings feature a bigger opening making routing easier SPECIFICATIONS: - Material: Alloy - Weight (g): 297 / 305 / 313 - Bar Clamp Diameter (mm): 31.8 - Width (mm): 400/420 /440 - Reach (mm: )72 - Drop (mm)1: 25

- Mild flat section is small enough not to restrict hand movements and allows for angle adjustment - 7000 series aluminum construction that exceeds ISO requirements - Shaping on the bottom side of the top section allows for smooth routing options - Width measured center to center. 230g (40cm)

Engineered for endurance riding, the ultralight Contact SL D-Fuse handlebar offers compliance and ergonomic fit for the most demanding conditions. FEATURES: - Proprietary D-Fuse shaping on the tops for compliance and lightweight. - 8-degree flare in the shallow drops puts the hand and wrist in a comfortable and efficient position. - Compatible with Contact SLR and SL Aero and AeroLight stems for full internal cable routing. - Ergonomically shaped contact points fit the hand and palm from various angles, alleviating fatigue and numbness that can occur over long miles. - Ultra-light aluminum for optimal stiffness at a lightweight. - 38% more compliant and 16 grams lighter than the previous Contact SL D-Fuse handlebar. SPECIFICATIONS - Weight: 264g (420mm) - Bar Clamp Diameter: 31.8mm - Width: 400/420/440mm - Reach: 125mm - Drop: 72mm - Rise: 0° - Backsweep: 0° - Outsweep: 0° - Flare: 8° - Material: Alloy

Thomson custom-drawn alloy drop bars are optimized with performance-based bends, paired with tough, durable features. The lineup includes 3 profiles with varying widths, shapes and flares to meet all disciplines of drop bar goodness. Made from 7000 series aluminum, and sharing the carbon drop bar shapes, the alloy drops feature 3 profiles a mid flat, a round profile, and the flared dirt drop. The mid-flat is minimal in design and big on comfort. The flat diameter stays small enough so to not restrict hand movements when riding on the tops. Concave shaping on the bottom side allows housing to be taped and out of the way. The round profile and flare dirt drop share similar top profiles with custom-drawn ergonomic bends.

- Aerodynamic integrated Cable Routing (ACR) - Alloy handlebar is designed for Adventure, Gravel and Cyclocross - Sculpted contact points for the "hoods" and "drops" riding positions for better ergonomics - Flared drops for better control and clearance when descending - Stem Clamp Diameter: 31.8mm - 120mm drop, 80mm reach - 15° outward bend - Finish: Bead blasted anodized black - Weight: 292 grams (420mm)

FSA's Energy Compact handlebars push aluminum technology as far as it can go. Cutting-edge manufacturing allows us to form and manipulate high-strength 7050 aluminum tubing, varying the wall thicknesses and diameter throughout the bar. There's even an ergonomic flattened section on the tops, either side of the generous central bulge that gives plenty of room to mount accessories. A shallow drop and short reach are ideal for riders looking for a less aggressive riding position. The finish is sandblasted black on the taped areas for grip, with stylish polished anodizing on either side of the stem. - Aerodynamic Integrated Cable Routing (ACR) compatible - Semi-integrated Cable Routing (SCR) compatible - Double butted and tapered AL7050 - 34mm Ergo flat top - 110mm-wide round center section makes it easy to mount accessories - Bar width: center/center from the handlebar tails - Outward Bend: 4°

An aluminum handlebar with IsoZone pads that displace vibration and a compact flare that increases wrist clearance. Integrated comfort Ready to ditch the wrist fatigue that accompanies rough road rides? IsoZone foam pads are integrated directly into the tops of the alloy Elite IsoZone bar for a 20% displacement in vibration. This alloy bar features a Variable Radius Compact Flare (VR-CF) shape for extra room in the drops. - Custom-butted, 6066-T6 alloy construction - Variable Radius Compact Flare (VR-CF) increases wrist clearance for ergonomic positions - Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing - Compatible with clip-on aero bars - Shot-peened finish increases fatigue life - Laser-etched brake lever position lines for spot-on control setup

A gravel handlebar with a wider flare that gives riders more comfort and control through any terrain. The bar with a flare for adventure The GR Elite Road Handlebar is a lightweight alloy bar designed to give gravel and adventure riders more comfort, control, and confidence, especially when in the drops. IsoZone EVA pads deliver entire-ride comfort, while the bar's 75mm reach, 128mm drop, and 13-degree flare make it easy to access brake levers and shifting controls from all riding positions. Product details - 13-degree flare allows for more control in the drops - Custom-butted, lightweight 6061-T6 alloy construction - Shorter reach and wider flare allows for confident handling and easy access to controls - Replaceable IsoZone EVA pads add comfort while maintaining original grip diameter - Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing - Laser-etched brake lever position lines for spot-on control setup - Compatible with clip-on aero bars

Profile's Largo bar uses double-butted 7075 aluminum to make a lightweight handlebar that maximizes stiffness for sprinting and climbing. A wider center clamping area easily accommodates clip-on aerobars and the extended reach means there's no compromise between an aerobar or in-the-drops position. The Largo is also shot peened and anodized for added strength and durability and offers excellent comfort due to its ergonomic bends.

- D-shaped lightweight optimized 2014 aluminum alloy construction - Provides better "pushing" compliance for a smoother ride quality - Provides better "pulling" stiffness for cornering, sprinting, and climbing efficiency - Drop 125mm - Reach: 72mm

COMPACT, LIGHT & COMFORTABLE Inheriting many of the benefits from the flagship Contact SLR model, the all-new Contact SL road handlebar, is the go-to bar for riders seeking a lightweight but stiff and vertically compliant aluminum bar with compact geometry. Featuring all-new ergonomic shaping, the Contact SL handlebar also offers increased comfort for all day rides. FEATURES - Giant’s advanced alloy manufacturing process reduces weight by 20% when compared with previous versions, dropping from 290g to 230g for the 400mm width model. - Short reach and shallow drop for instant transition among the tops, hoods and the drops - A wider, curved top section adds vertical compliance and delivers a smooth ride - Purpose-designed ergonomic shaping of the top of the bar provides maximum hand comfort and support for long rides

- D-shaped lightweight optimized 2014 aluminum alloy construction - Provides better "pushing" compliance for a smoother ride quality - Provides better "pulling" stiffness for cornering, sprinting, and climbing efficiency - Drop 125mm - Reach: 72mm - 8 degree flare