Shimano

Pair of J-Type disc brake pads with fins, for 1 caliper Available with resin or metallic compound Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches Longer lasting than G-type pads Interchangeable with F-Type and G-Type pads Includes spring and pin

The Shimano BL-M4100 hydraulic disc brake lever provides powerful and responsive braking for a wide range of riding styles. Replacement lever (does not include hose connection hardware or brake fluid) Smooth and durable master cylinder design

Shimano's Deore-level 10-speed Chain offers excellent power transfer and top-notch durability. It showcases a mud-shedding design and Shimano's directional design with engineered inner and outer plates for smooth, fast and precise shifting.

This product is open box and was swapped off a Pivot Shuttle LT - 12-speed cassette sprocket - HYPERGLIDE+ provides fast and smooth shifting - BEAM SPIDER construction cuts weights and boosts stiffness - New MICRO SPLINE freehub body and HYPERGLIDE+ tooth profile - 10-51T wide range 12-speed gear combination

Shimano Deore BR-M6120 4-Piston Disc Brake, rear Brakes are assembled with hoses and pre-bled & include Shimano D03S resin brake pads. With quicker brake engagement and shorter free stroke, the Shimano DEORE disc brake set delivers reliable braking, allowing you to remain focused on the trail. The set delivers dependable braking in all weather conditions with the 4-piston callipers adding more control and inspiring greater confidence on descent. SERVOWAVE ACTION brake levers Initial pad travel is fast enabling quicker contact with the rotor. Power then increases rapidly, so more of the lever stroke is used to apply greater braking power with improved control. Easy, quick and clean installation and maintenance One way and funnel bleeding utilizing a new, more convenient bleeding nipple position Levers have an additional point of contact with bar, increasing stiffness. 4 piston callipers reduced brake pad wear and disc brake rotor wobbling noise while increasing braking power.

- Deore/Tiagra 9-speed compatible - 3/32-inch - 116 links

SM-DBOIL - FOR SHIMANO DISC BRAKE, 1000ML/1L

- New resin pads have 50% more durability! - Pair of G-Type disc brake pads without fins, for 1 caliper - Resin compound, for improved modulation & lower noise - Available with Steel backplate for lower cost or Aluminum backplate for superior heat management - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Interchangeable with F-Type and J-Type pads - Includes spring and pin - Disc Pad Material: Resin - Pad Shape: Shimano G-Type/F-Type/J-Type - Backplate: Steel - Pad Spring: Included - Cooling Fins: No - Model Compatibility: BR-M8000

Pair of L-Type brake pads with fins, for one caliper Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade, especially in long descents Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions Longer lasting than K-Type pads Interchangeable with K-type finless pads Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 NOT compatible with XTR BR-M9100

Shimano L05A resin disc pads with Ice-Tech cooling fins. 40% more wear resistant than its predecessor L03A. Recommended for Dura Ace, Ultegra and 105 disc brake calipers. Resin. Compatible with Dura Ace, Ultegra and 105. Ice-Tech. BR-R9170, BR-R8070, BR-R7070, BR-RS805, BR-RS505, BR-RS405, BR-RS305, BR-U5000.

LIMITED DURA-ACE SPECIAL EDITION OF OUR ULTIMATE ROAD COMPETITION SHOE. FEATURES Shiny set of low-profile BOA® Li2 metal dials dazzle with their premium looks and quick micro-adjustments. 360º surround wrapping upper with enameled finish creates a supremely engineered fit with a dash of luxury for all riders. Tastefully refined glossy black heel cup with anti-twist stabilization secures optimal foot positioning for intense acceleration and high tempo cadences. Function-specific zones and scientifically optimized upper materials maximize fit and pedaling performance. Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. Adjustable powerzone lace guide securely holds forefoot.

- 10-speed compatible - Shimano XT - 116 links

- Brake housing for polymer coated brake cables - Refer to Documents and links to find the right product

Shimano, SLR brake housing, 40m, Black

Sold by the foot, please add the desired length to your cart and we will cut and trim to size. If multiple lengths are required, please add total length to cart and add a note at checkout with specific lengths.

Shimano Y8H298040 SM-BH59 Olive and connecting insert

- Shimano, Y8JA98020, SM-BH90, Olive and connecting insert

TL-EW300 Di2 Cable Tool

Shimano Replacement pads for Mountain brake shoes - Color: Black - Intended Brake Type: Linear Pull - Pad Attachment Style: Threaded Post - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard - Shimano Cartridge-type mountain brake pads fit models: XTR BR-M970, BR-M960, BR-M951, BR-M950 XT BR-T780, BR-M770, BR-M760, BR-M750, BR-M739, BR-M737 LX BR-T670, BR-M580, BR-M570 Deore BR-M530, BR-M510 Alivio BR-M430, BR-MC18 Acera BR-M422, BR-M421, BR-M420, BR-M330, BR-T300 DXR BR-MX70 MX BR-M600 - M70R2: Severe condition brake pad, high performance in dry or wet conditions

- Shimano, 22T, 9 sp, BCD 64mm, 4-Bolt, Deore FC-M590, Inner Chainring, For 22/32/44, Steel, Black, Y1LD22000

- R50T2 compound brake pads for BR-4600 - Also fits BR-4600, BR-3400 and BR-R450 - Adjustable toe-in and contact angle - 5 pairs

- Replacement chain pins for Shimano 11-speed chains - Compatible with CN7900/7801 chains - 3 pins per pack

Shimano B05S Disc Brake Pads - Includes 3 types of split pins - Provides 50% more wear resistance than previous model (B03S) - Compatible with Shimano models: BR-MT500, BR-MT400, BR-MT200, BR-MT375, BR-TX805, BR-UR300 - Stainless steel back plate

- Left (Front), Right (Rear) sold separately - Optical Gear Display - Easy cable replacement - 6 or 7 speed rear (SIS) compatible - 2 or 3 speed front (SIS or Friction) available - Shift cable included

- Left (Front), Right (Rear) sold separately - Optical Gear Display - Easy cable replacement - 6 or 7 speed rear (SIS) compatible - 2 or 3 speed front (SIS or Friction) available - Shift cable included

Shimano Hydraulic Disc Brake Fluid - Non-corrosive mineral oil that offers excellent heat expansion properties - Mineral oil will not absorb water from the air - Not caustic and is non-toxic

- Replacement pins for 9-speed Shimano chains - Compatible with CN-7700/HG92 chains - 3 replacement pins per pack

Shimano SLX M660 9-Speed chainrings get your drivetrain back to optimal operation.

- Pair of G-Type disc brake pads without fins, for 1 caliper - Resin or Metallic brake compound - Available with Steel backplate for lower cost or Aluminum backplate for superior heat management - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Interchangeable with F-Type and J-Type pads - Includes spring and pin

- Pair of K-Type disc brake pads without fins, for one caliper - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Steel backplate for lower cost or Ti backplate for improved heat management and lower weight - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - Also compatible with XTR BR-M9100 calipers - Interchangeable with L-type finned pads (except for XTR BR-M9100)

- New resin pads have 50% more durability! - Pair of G-Type disc brake pads without fins, for 1 caliper - Resin compound, for improved modulation & lower noise - Available with Steel backplate for lower cost or Aluminum backplate for superior heat management - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Interchangeable with F-Type and J-Type pads - Includes spring and pin

- Pair of K-Type disc brake pads without fins, for one caliper - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Steel backplate for lower cost or Ti backplate for improved heat management and lower weight - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - Also compatible with XTR BR-M9100 calipers - Interchangeable with L-type finned pads (except for XTR BR-M9100)

- Shimano, BR-7900 R55C3 Replacement cartridge pads, pair - Also fits BR-6700 and BR-5700

Shimano SLX M7000 10-Speed chainrings get worn out drivetrains back in like-new condition.

Shimano, SM-MA-F203P/P, Disc brake adapter for Post Mount caliper, Front, Post Mount fork, 203mm rotor

- Conventional freewheel - Compatible with all Shimano 6-7 speed chains

Compatible with DUAL SIS index shifting, the Shimano Tourney TY front derailleur is perfect for 3x7 and 3x6 speed drivetrains. - Action: TOP SWING - Angled clamp band design - Applicable Top-Mid tooth difference: 10T - Chain line: 47.5/50mm - Chain stay angle: 63-66 - Top gear teeth: 48T - Total capacity: 20T

QUICK-LINK FEATURE - Tool-free assembly (possible) - Non-reusable - TL-CN10 BENEFIT - Easy connect - Compatible with current 11-speed chains - Quick assembly tool

Shimano Stainless Derailleur Cables Cable Head: Shimano/SRAM Cable Type: Stainless Defined Color: Gray Diameter: 1.2mm Double Ended: No Length: 3000 mm Quantity Included: 1

- Shimano, BR-M515, M05, Resin disc brake pads, pair, B type, Y8B698010 - Can be used to replace E-Type pads on older calipers

Chain FEATURE - Anti-corrosion treatment for longer service life BENEFIT - Anti-Corrosion

- Chainrings for SLX FC-M675 double cranks - Please refer to compatibility: 38T chainrings are available for 24T or 26T inner chainring and are not cross-compatible.

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

- Shimano, Tiagra FC-4703, Chainring, Teeth: 30, Speed: 10, BCD: 74, Bolts: 4, Inner, Steel, Grey, Y1RD30000

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use

Shimano's BB-UN55 Square Spindle Bottom Brackets are the unofficial standard for English-threaded cartridge bottom brackets. Quality, value, and durability come together to keep you cranking for many, many miles. - Fits JIS Square-Taper Cranksets - Hollow spindle - Crankarm fixing bolts not included

- Width: 5.8 mm - Drivetrain Speeds: 11 - Color: Silver - Reusable: No

Don't let a cracked or worn dust cap sully an otherwise well-functioning Shimano Alfine internally geared hub. Get a spare and replace as necessary for continued performance and to preserve the longevity that you expect from Alfine.

- HG technology has chamfered inner plates to optimise shifting performance on HG sprockets - Durability is assured through the heat treatment of rollers, pins, and plates - Includes connecting link - Weight: 335 grams

Nexus SL-C3000 Revoshift easily shifts through 7 gears. - Rotational twist shift action - Improved overall internal geared hub system efficiency

The Revoshift shifter allows you to change gears by simply twisting with thumb and index finger while keeping your hands on the handlebar. - Easy and reliable shifting is good for average riders and beginners. - Dual-diameter shift collar allows any hand size to get a secure grip on the shift collar. - Designed to improve efficiency in the Nexus internally geared hub system

- Shimano, GRX FC-RX810 2x11, Chainring, Teeth: 31, Speed: 11, BCD: 80, Bolts: 4, Inner, Aluminum, Black - Shimano, GRX FC-RX810 2x11, Chainring, Teeth: 48, Speed: 11, BCD: 110, Bolts: 4, Outer, Aluminum, Black

Enjoy quality and reliability with the Shimano Tourney 6/7-speed rear derailleur. It makes use of Shimano SIS, HyperGlide, and Double Servo technologies for smooth, accurate shifts. - Maximum cog size: 34t - Total capacity: 43t

Enjoy quality and reliability with the Shimano Tourney 6/7-speed rear derailleur. It makes use of Shimano SIS, HyperGlide, and Double Servo technologies for smooth, accurate shifts. - Maximum cog size: 34t - Total capacity: 43t

- Compatible with 6 and 7-speed SIS Index Shifting drivetrains - Includes BMX/track frame hanger

The Shimano Tourney SL-TX30 is a thumb shifter for mountain bikes that features Shimano's Optical Gear Display, which tells riders what gear position is selected while riding. - Thumb shifters - Optical gear display - Includes SIS40 shift cable set

Shimano 105 5800 11-Speed chainrings replace worn out parts and get your drivetrain running smoothly again. - Drivetrain Speeds: 11 - Chainring BCD: 110 asymmetric