Parts & Accessories

Our Rim Strips provide the ultimate in protection between the rim and tube for all types of bicycle setups. - Nylon for maximum strength and effectiveness. - Conforms to rim profile.

With enough capacity for a 16g or 25g CO2 cartridge, tire lever and an inner tube, the all-new Clutch Frame Strap lets you carry the bare essentials for every ride easily and conveniently strapped directly onto your frame. Features: - 1" width easily fits quickly and easily anywhere on your frame - Heavy duty Bartack used on all shock cord stress points - Machine washable Specifications: - Fits 16g or 25g CO2 Cartridge x2, tire lever x2, inner tube - Sizes: 78 x 48 x 8mm - Colors: Black/Sliver - Weight: 118g - Material: Nylon fabric

The Product that Started a Tubeless Revolution Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant. Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires. - First choice of riders around the world for tubeless conversion and flat prevention - Seals punctures up to 1/4-inch (6.5mm) quickly - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment - Can be injected through valve stems with removable cores compatible with tubes and tubular tires

• Specially formulated adhesive backing to manage heat from rim brakes • Narrow - fits tubeless compatible on-road wheels with 16-20mm inner rim widths • Wide - fits tubeless compatible on-road wheels with 18-22mm inner rim widths

Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires. - Suitable for use in tubeless tires and standard tubes - Designed to seal punctures up to 1/4" - Stable down to -30 degrees Fahrenheit - Non-hazardous, non-corrosive, non-toxic - Contains natural latex

45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud, featuring a concave carbide-aluminum design. The super-sized concave crown creates open space and inside edges of the bowl, resulting in twice the surface area for increased traction and grip. - Concave tip for durability and longevity - Aluminum base to save weight - Compatible with the 45NRTH stud insertion tool - Sold in a pack of 100 - XL Stud features a larger carbide tip diameter for increased traction

The Muc-Off Tubeless Rim tape is made from their proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy.

- Handlebar-mounted tubeless repair kit - Discreet and neat finish, completely integrated inside the handlebar - Anodized aluminum bar ends - Tool-less expansion plugs fit internal bar diameters from 17.5mm to 21mm - Easy to use: No need to dismount the tire - Durable reparation of flats between 1 and 5mm - Integrated holder for an additional chain link and a tubeless valve (link and valve not included) - Includes tubeless plugs (3 x 2mm and 3 x 5mm), needle tool (reamer) and knife - Weight: 75g

Tannus Armour is the ultimate in tire protection and performance for all levels and styles of riding. Sitting between your tire and inner tube, the Tannus Armour provides 15mm of puncture protection on the top, as well as 2mm of sidewall protection from sharp objects and rocks. Whether you are a city biker, adventure tourer or prefer the off-road, downhill or gravel trails, Tannus Armour gives you increased grip and vibration dampening for a smoother, more comfortable and enjoyable ride. - Patented Aither Technology; Aither is a multi-cell foam compound that forms the structure of the Armour

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 2.6 – 3.0" and rims with internal width 32 – 45mm Includes - 1 CushCore Insert - 1 CushCore Tubeless Air Valve - Installation Instructions

Designed for high pressure tires (over 70 PSI) -Ultra durable plyurethane

CushCore tubeless air valves are specially designed to work with a CushCore tire insert. The air passageway is T-shaped, rather than a simple through-hole, which prevents the insert from obstructing air flow through the valve. - Made from CNC machined from 6061 T-6 aluminum, anodized black - Tapered rubber collar permanently bonded at the sealing interface - The valve core can be removed to add tire sealant - Valve locknut with o-ring seal and valve cap are included - Sold as a set

For high pressure (Presta) valve with removable valve core. - Tubeless compatible - Valve core removal key included - Aluminum - 2 per set - 12g

"Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it. Made from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn’t widen the size of the hole already there. Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn’t have any issues gripping the tool, even in the muddiest of conditions. Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags. KEY FEATURES - Available in 12x Chris King colours - Quick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the fork - With no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible so it doesn’t widen the size of the - hole already there - Fork made from 316 stainless steel - Body made from anodised 6061 aluminium - Knurled body and ribbed lid / handle for extra grip - Weather sealing o-rings make the tool waterproof when assembled - Each kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugs"

The Lizard Skins Utility Strap is an easy way to stow essential tools and a spare tube. The minimally designed Utility Strap is a lightweight on-bike storage solution for any rider. This versatile system is made to securely attach under seats and other locations on bike frames. The Utility Strap has a wide strap and durable metal buckle. - On-bike storage solution - Inner sleeve to compress the tube - Multiple spots for tools: CO2, Tire Lever, Multi-tool, etc. - Wide strap and durable metal buckle - Silicone and rubber grip for stability - Compact and lightweight - Attach under the seat or other locations on the bike frame - Weight 4oz

With design, sustainability & quality running right to the core, there’s only one company we could work with on our valve colours - Chris King! With our valves for life guarantee and their stunning colourways, your bike is in for a real treat for years to come. Made from premium lightweight, high strength 7075 aluminium, Peaty’s MK2 Tubeless Valves fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims. Our unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, our valves have a ‘straight-through’ design so there’s no reduction of sealant or air flow when tyre inserts are not used. Fitting couldn’t be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails. Crushed a rubber or snapped an o-ring? No problem, check out our service kits to spruce up your valves when swapping to your next set of wheels or new bike. Instructions (1) Remove valve cap, o-ring and lock nut (2) Insert valve through valve hole in rim (3) Push the o-ring onto valve stem (4) Thread the lock nut onto valve stem (5) hand tighten lock nut until firm (6) Screw on valve cap

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 2.1 – 2.6" and rims with internal width 22 – 35mm Includes - 1 CushCore Insert - 1 CushCore Tubeless Air Valve - Installation Instructions

Tubeless Valve/Tape Kit - Includes Tape, 2 Universal Valves & 1 Valve Core Wrench

Developed alongside World Cup mechanics and world champion racers. Peaty’s Holeshot Tubeless Sealant is packed full of biodegradable fibres & sealing particles to give a fast and strong seal. Using the latest fast-acting latex, our water-based sealant is ammonia-free, non-hazardous and lasts up to 6 months in the tyre in temperate climates*. It won’t ball up in the tyre and is easily washed out. Our biodegradable fibres and particles bind together with the fast-acting latex to create a clot (like platelets in your blood) to quickly & effectively seal holes and tears up to 6mm. Key Features: - Biodegradable sealing fibres - Biodegradable platelets - CO2 compatible - Seals up to 6mm holes - Operating pressures: 15 to 120 psi - Operating temperature: -20°c to +50°c - Seals porous tyres and bead/rim gaps setup Setup Instructions: Always ensure you have tubeless ready rims and tyres. For best results use with Peaty’s Tubeless Rim Tape and Peaty’s Tubeless Valves. 1. Shake the bottle vigorously before every use to ensure an even distribution of fibres and particles. 2. Rinse away any old sealant from the tyre and dry off completely. For brand new tyres degrease, rinse and dry the internal carcass to remove factory mold release agents and other contaminants. 3. Seat your tyre onto the rim and inflate initially with no sealant, using a track pump, inflator or compressor to pop the tyre bead fully onto the rim. 4. Deflate the tyre and, with the valve at the three o’clock position, use the flexible injector pipe provided to inject the desired amount of sealant directly through the de-cored valve. 5. Re-insert the valve core and re-inflate the tyre to desired pressure. 6. Distribute the sealant around inside the tyre by spinning the wheel and tapping the tyre on the floor. 7. Listen for any air leaks and orientate the wheel so that the sealant flows around the inside of the tyre to the area required. Continue doing this until you can’t hear any more air loss † 8. Wash away any excess sealant that may have found its way to the outside of the tyre or rim with water. 9. Check tyre pressures and ride! Recommended minimum quantities per tyre: - Road 30 - 45ml - CycloCross 60 - 75ml - 26” MTB 60 - 80ml - 27.5” MTB 70 - 90ml - 29” MTB 100 - 120ml For wider rim / tyre combinations and / or additional puncture protection we recommend adding up to 30ml more sealant to the above quantities * Always check sealant regularly and top up as required † If a seal can’t be made, add more sealant in increments as required

- Available in 1.5mm & 3mm plug sizes. - 6 plugs per pack, in 2 sheets of 3 plugs - Designed to fit perfectly into the body of Peaty’s Holeshot Tyre Puncture Plugger tool - Packaged using recycled cardboard header cards and biodegradable bags

Subzero tire sealant. It's formulated to maximize extreme frigid temperature; enabling riders in the far North to ride with flat protection. All while offering the same quick-sealing properties you’ve come to expect. - Premium Latex coats the whole casing, from tire bead to tread cap - Seals punctures up to 1/4" with the use of Nanites - Developed to add as little weight to a tire as possible - Made of eco-friendly biodegradable ingredients - Subzero sealant is developed for use in below-freezing conditions down to -20F

- Tubeless Valve compatible with Stan's ZTR rim - Sold as a pair

Built with Kevlar to deliver faster and stronger seals, FiberLink represents a new standard for tubeless bicycle tire sealant. Developed with Finish Line's proprietary FiberLink Technology, this groundbreaking pro latex formula seals quickly, ensures maximum seal integrity and delivers optimum longevity. - FiberLink Technology utilizes Kevlar fibers that work synergistically with fast-acting natural latex to seal punctures as they occur. Free-flowing latex cures rapidly to create an adhesive seal which is reinforced with interlinking Kevlar fibers - Low viscosity is ideal for race conditions - Fast-acting natural latex reduces air loss - Optimum longevity between refresh cycles - Low odor and easy to setup - 8oz Drip Bottle

Thin, low viscosity liquid with improved sealing capabilities over the standard NoTubes sealant. - Twice the sealing crystals compared to standard NoTubes sealant - XL crystals and standard crystals combine to seal larger punctures - Stable down to -30 degrees Fahrenheit - Not compatible with injectors or through valve cores

45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud with a concave carbide-aluminum design. The open space and edges created by the large concave crown result in twice the surface area for increased traction and grip. - Concave tip for traction, durability, and longevity - Aluminum base to save weight - Compatible with 45NRTH stud insertion tool - Compatible with all studdable 45NRTH tires - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

Laugh in the face of punctures with Muc-Off's super lightweight inner tube sealant! The No Puncture Hassle Inner Tube Sealant is easy-to-install, and the cutting edge molecules seal holes in tubes of up to 4mm, ensuring that your ride is uninterrupted. - Proprietary water-based non-hazardous formula developed specifically for use with inner tubes - Compatible with a wide range of tube sizes and bikes - suitable for commuter, folding, urban, touring, MTB and e-bikes - Works on multiple punctures - Lasts the life of the inner tube/tire - Contains cutting-edge molecules to help seal holes quickly and effectively; seals holes in tubes up to 4mm

The 45NRTH stud tool seats and removes the stud from the stud pocket. Customize your stud tread pattern or replace missing studs. Works with all 45NRTH studdable and studded products. Aluminum carbide studs sold separately. - POM-injected handle - Stainless steel barrel - Thumb and index-finger grips for more comfort and control - Compatible with studs that have a 3.5mm or smaller shaft

- The same tubeless valves, now with a Tire Insert air flow system - 6 slots machined into the base of the valve stem allow air to flow freely around tubeless tire inserts - Upgraded to aircraft grade 7075 aluminum valve stem and cap - 4mm machined Allen Key slot for easy installation/removal - Valve core removal tool integrated into valve cap - Includes multiple rubber bases to optimize fit with multiple rim types

Tannus Armour is the ultimate in tire protection and performance for all levels and styles of riding. Sitting between your tire and inner tube, the Tannus Armour provides 15mm of puncture protection on the top, as well as 2mm of sidewall protection from sharp objects and rocks. Whether you are a city biker, adventure tourer or prefer the off-road, downhill or gravel trails, Tannus Armour gives you increased grip and vibration dampening for a smoother, more comfortable and enjoyable ride. - Patented Aither Technology; Aither is a multi-cell foam compound that forms the structure of the Armour

- Create an air tight seal for BST rims - Can also be used as a lightweight rim strip for any rim