Filter By:
Your Search: "One Up"
$33.00
The EDC Cap Kit includes the worlds lightest headset top cap (4.2g), and an EDC steerer plug with drain hole which keeps crud out of your steerer.
Top caps are compatible with all 1-1/8" aluminum steerer tubes.
The EDC steerer plug is required for EDC tool storage and is compatible with most aluminum tapered steerer tubes.
KIT INCLUDES
EDC TOP CAP
EDC steerer plug
2x 1mm, 3mm, & 5mm Headset Spacers
$52.00
A Threadless, no tap install option that lets you store the EDC V2 Tool inside your stem/steerer tube without threading your steerer tube. EDC Tool sold separately.
The Threadless Carrier replaces your star nut and lets you preload your headset with a bolt, while also creating a space for the EDC Tool.
Easy to install in less than 10 minutes. Install instructions
Available in 8 colours
Compatible with EDC V2 Tool (You must use the small EDC V2 Storage Capsule with the Threadless Carrier.)
The EDC Threadless Carrier is NOT compatible with V1 EDC Tools (Green Multi-Tool)
ENSURE YOUR FORK IS COMPATIBLE - VERY IMPORTANT
Incompatible forks: Fox 38 with oval steerer (Use a EDC Threaded install), Giant Overdrive 2 Forks. Cannondale Lefty Forks. Carbon Steerers
$53.00
The included 9 function Multi Tool contains your most used tools and is designed to live inside your stem/steerer tube.
Never get stuck without a Multi-Tool on a ride ever again.
? 2, 2.5, 3, 4, 5, 6, 8mm
? T25 Torx
? Flat Head Screwdriver
Light weight (Adds just 75g to your bike)
Easy to install in less than 5 mins.
Available in 6 colours (Black, Red, Blue, Green, Orange, Purple, Turq)
No need to remove your star nut or thread your steerer tube.
Colour matched to our Composite Pedals, Grips and Handlebar Decals.
Run a single Multi Tool on all your bikes (extra carriers are $15 each)
ENSURE YOUR FORK IS COMPATIBLE -VERY IMPORTANT
Incompatible forks: Giant Overdrive 2 Forks. Cannondale Lefty Forks. Carbon Steerers
STEERER TUBE INNER DIAMETER
The inner diameter of your steerer tube must be at least 24.1mm. OneUp is not currently aware of any tapered steerer tubes that do not meet this requirement. If fitting unsure, you can check this by inserting the tip of the EDC Lite into the steerer tube above the star nut BEFORE lowering the star nut position.
STEERER TUBE LENGTH
Most forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases your fork steerer tube length must meet the minimum length requirement.
Fox except Fox 38 = 190mm min
Fox 38 = 210mm min
RockShox Forks = 210mm min
Measure from the underside of your fork crown to the top of your spacer stack, or top of your stem if you are not running any spacers above your stem
$56.99
EDC MULTITOOL SPEC
2, 2.5, 3, 4, 5, 6, 8mm Hex
T25 Torx
Flat Head Screwdriver
EDC Top Cap Tool
Innovative 8mm hex design. The EDC Tool contains no loose easy to lose driver bits.
$65.00
A BETTER REMOTE FOR ANY CABLE OPERATED DROPPER
An Aluminum remote with an oversized bearing and a super smooth action. The unique lever position allows you to keep a stronger grip on the bars while actuating your post. Don't think twice about dropping your post, even when charging into technical sections. The OneUp lever mimics your R/H shifter’s inboard upshift paddle position instead of the usual downshift paddle position of most remotes. This position requires considerably less thumb movement to reach the lever.
NO BLEEDING
The cable setup is quick and easy. The cable clamps at the lever making shortening the housing length for clean routing a breeze. Unlike a hydraulically actuated dropper, there is no temperature sensitivity and If your remote gets damaged you can still lower or extend your post by removing it from your frame and pushing on the actuator by hand.
Kit includes cable and housing
Compatible with all cable actuated dropper posts.
SPECS
Compatibility
22.2mm Bar Clamp - All other groups including 12 speed XT M8100 , SLX M7100 and all 10 speed Shimano
SRAM Matchmaker X - SRAM MMX clamps
Shimano I-spec-EV - 12 speed XTR M9100, XT M8100 and SLX M7100
Shimano I-spec II - 11 speed XTR M9000, XT M8000, SLX M7000 only
$73.00 - $78.00
The EDC Pump offers a unique storage solution integrated into a high volume pump. It is designed to integrate with the EDC Tool System, CO2 canister or your favorite stash. Crafted from aluminum with a durable textured machined finish.
PUMP VOLUME
A mini pump might look appealing, but with typical volumes of 30-60cc it will take hundreds of strokes to inflate a new tube and has absolutely no chance of re-inflating a tubeless setup. When you get a flat, you want to fix it as fast as possible as riding time is precious. At 100cc and at 160g our high volume pump has the highest volume to weight ratio on the market.
FAST-ON HEAD
Firmly push the pump head onto the Presta valve until it bottoms out, then pump. With our fast-on head the valve stem is securely supported so there's no chance of bending, breaking or unseating the valve and no chance of unscrewing your valve core when you remove the pump.
EDC PUMP SPEC
2 Sizes: High Volume 100cc & Compact 70cc
1-1/4" dia x 7" for 70cc (32mm dia x 178mm)
1-1/4" dia x 10" for 100cc (32mm dia x 254mm)
100cc Pump holds EDC Tool & a 20g CO2 or EDC Tool & the Storage Capsule
70cc Pump holds EDC Tool (no Storage Capsule) or a 20g CO2
Fast-On Head (Presta Only) - No threads or locking levers
Integrated CO2 Inflator
Fully Sealed, Weatherproofed Internals
Includes Bottle Cage Mount
Material: 6061-T6
Weight: 135g - 70cc, 160g - 100cc (without EDC tool system)
Colour: Black
$87.00
The OneUp Cartridge is user replaceable and fully sealed.
Compatible with OneUp Components V1 Droppers
$104.00
Joining our all new Carbon Handlebar is the OneUp Stem. Designed for everything from trail riding to Enduro racing.
The OneUp Stem can be used with a regular star nut and top cap like every other stem. It’s also compatible with existing threaded EDC top caps, for people who’ve already threaded their steerer tube. Or you can use the new OneUp Preloader (sold separately), which lets you store the EDC tool in your steerer without threading it.
SPECS
Length: 35mm (157g) 50mm (173g) / 35mm Dia. / 0° Rise
Colour: Black.
Stack Height: 38.5mm
Bar Clamp Width: 55mm
Material: 6061-T6 Aluminum
$182.00
ONEUP CARBON BARS. Strong, lightweight & vertically compliant.
The goal for the new OneUp Carbon Handlebars was to make the best feeling bar possible, something which would let us ride harder for longer.
The solution is our patent pending oval shape which combines the best ride characteristics of 31.8mm and 35mm bar standards into one package. This is the most comfortable bar we’ve ever ridden, period. It's strong, lightweight, minimizes arm pump and vibration and maximize steering response. 35 done right.
"The OneUp bar gives me all of the confidence inspiring attributes of a 35mm bar with a bit of forgiveness engineered in for those big descents. I've been so impressed after putting it through the paces for the last year." —Thomas Vanderham
Almost every other carbon bar on the market copies the simple tapered profile of an Aluminum bar. With carbon you can take advantage of more complex shapes to get a better performing product, so that's what we did. If you actually care about bar compliance, then you don't make a regular 35mm diameter bar. Sure you can try to "optimize" the flex slightly with layup, but geometry is king and you're fighting a losing battle.
The OneUp bar profile minimizes the length of the 35 diameter clamping area as this is the stiffest portion of any 35 diameter bar. The 35mm clamp diameter quickly changes to a flattened, oval shape in the transition zone and then to a standard 22.2mm clamp diameter for the control zone.
We bench marked the OneUp bar against the most popular carbon bars on the market as well as foam filled aluminum bars. The results were, on average, a 21% increase in vertical compliance (comfort) coupled with a 28% increase in steering stiffness (responsiveness). These are more than just marginal gains.
Until now the 35mm diameter standard has had a bad reputation and rightly so. This is 35 Dia. done right.
SPECS
Geometry: 800mm Wide / 35mm Dia. / Sweep 8° Back 5° Up
Weight: 20mm Rise (220g) 35mm Rise (225g)
Max Stem Clamp Width: 65mm
Max Control Torque: 5Nm
Colour: Black. Decal kits: Available in Red, Green, Blue, Orange, Purple & White
$263.00
The OneUp Dropper post is now available in 120mm, 150mm, 180mm and 210mm lengths and all can be shimmed down in travel by 10 or 20mm.
We've been obsessed with shaving every last millimeter from the latest OneUp post to give you the the shortest stack height and shortest total length of any dropper post. No other post can get your saddle lower.
Still starting from $199 USD with free shipping worldwide, cable actuated with reliable sealed cartridge internals for easy home servicing and includes travel adjust shims allow you to custom tune your post to dial in your perfect length.
The dropper market is dominated by expensive big brand posts and generic catalog shopped posts with different logos. We want to offer something better, a post with class leading specs, innovative useful features AND real value. Want more from your dropper? Get OneUp.
FEATURES
Travel adjust shims allow you to custom tune your post to dial in your perfect length.
Cable actuated for easy installation and a simple no bleed remote
Ergonomic remote paddle position
Reliable sealed cartridge internals
User replaceable cartridge only $60 USD
Easy to service at home
2 year warranty
UPDATES
Shortest total length of any dropper
Shortest stack height of any dropper
New upper DU Bushing in the upper collar
Increased bushing overlap and durability
100-210mm post lengths in 10mm increments.
20g lighter
SPECS
Drop 120mm, 150mm, 180mm, 210mm adjustable*.
Diameter 30.9, 31.6, 34.9
Routing Internal only
Remote Compatibility:
SRAM Matchmaker X - SRAM MMX clamps
Shimano I-spec-EV - 12 speed XTR M9100 only (M8100 and M7100 use 22.2mm clamp)
Shimano I-spec II - 11 speed XTR M9000, XT M8000, SLX M8000 only
22.2mm Bar Clamp - All other groups including 12 speed XT M8100 , SLX M7100 and all 10 speed Shimano
Cable clamping remote only (post requires cable stop to be assembled at base of post)
Travel Reducing Shim Reduces travel by up to 20mm.
Weight
Post Only
(30.9) 120mm 435g / 150mm 480g / 180mm 525g / 210mm 570g
(31.6) 120mm 450g / 150mm 500g / 180mm 545g / 210mm 590g
(34.9) 120mm 545g / 150mm 605g / 180mm 660g / 210mm 710g
Page 1 of 1