Filter By:
- Bikes (10)
- Accessories (3)
- Show More Sizes
- Show Fewer Sizes
Your Search: "ibis"
$4,295.00
$5,699.00
25% Off
The Ripley AF is our beloved, category-defying, short-travel, singletrack-scorching Ripley - rendered in aluminum, with more aggressive geometry. All the sizzle and pop of the carbon Ripley, now available as a complete bike at a wallet friendly price.
Handling
A trail-friendly 65.5-degree head angle and short (44mm) offset 130mm fork combined with 29” wheels makes for a super planted but still playful front end feel. A 76-degree seat angle puts your power directly to the pedals, while the short chainstays and pedal-friendly dw-link kinematics deliver that power without squandering a single watt.
DW Link Suspension
Our 15-year collaboration with Dave Weagle has yielded yet another bike with unparalleled climbing efficiency and tractability. Incredible snap and responsiveness are its trademarks, and a whole mess of plush, chunder-eating, downhill-crushing goodness gets thrown in for good measure. Wrap that together and you get the best suspension you’ll find anywhere. It’s that good.
$19.99
Key Specs:
Compatible with all frames and sizes.
Easy “peel and stick” installation
Made from 5mm thick toughened rubber
Dimensions: 155x46x5mm
Installation
Place your bike on your padded tailgate.
Using tape, mark where your frame contacts the tailgate pad
Wipe the surface of the downtube clean using rubbing alcohol or a similar cleaning solution
Dry the damp area with a lint free cloth
Apply Truckee, use firm pressure Allow pad to sit overnight before use
Stop and admire your bicycle while enjoying your preferred beverage
Installation Tips Cold may prevent the Truckee from adhering properly. We recommend applying at temperatures 50F/10C or warmer We recommend applying only if your paint is in good condition. If the paint is chipped, there is a risk you could remove additional paint when removing the Truckee. To remove, we recommend applying a gentle heat to reactivate the glue, then gently peeling up the edges. Be very careful if using a heat gun. Ibis is not responsible for any damage that may occur when removing the adhesive.
Ibis Hakka Rival 1X build kit w/ Bontrager Paradigm 700c wheels
Photo not representative of final build kit
$10,599.00
GEOMETRY
The 29? front wheel, bolstered by 180mm of travel, assures stability, whereas the 27.5? rear wheel allows for additional maneuverability. The 165mm of travel skillfully manages any fallout. With a 64 degree head tube angle (one degree slacker than the current Ripmo), a BB height similar to Mojo HD5, and chainstay length identical to the current Ripmo (despite the 27.5? rear wheel), the bike maintains an equilibrium between agility and stability.
FIVE SIZES
In order to place every size rider in the same position over the rear wheel, the HD’s seat tube angles get steeper as frame size increases. With four sizes, this would have resulted in larger jumps in reach, so we added a fifth size. The smaller increments across five sizes means that you can find just the right size. We encourage riders to choose their bike size based on their desired reach and top tube measurements.
COIL COMPATIBLE
Our upper link suspension layout is progressive enough to be sensitive off the top, yet supportive enough for the biggest hits. It is also compatible with all coil shocks, for those longer race stages that can tax air shock performance.
DW-LINK
The suspension layout may be new, but it’s still DW-Link. The inherent efficiency means you don’t need an overdamped shock to climb well. Less shock damping allows the wheels to stay planted on the ground, providing more traction and that hover-bike feel that our frames are known for. The HD6 climbs with a finesse that defies its enduro race pedigree.
TRACTION TUNE
Our custom tuned front and rear suspension feature extra light high speed compression and rebound damping to deliver unparalleled traction. This allows the wheels to flutter through rough terrain like a trophy truck storming through a set of whoops. To learn more about our Traction Tune philosophy, click here.
BUSHINGS
Tired of buying bearings each season? So were we. That’s why we’ve strategically employed bushings where they’re most effective and bearings elsewhere. The IGUS bushings in our lower link are not only lighter and stiffer, they’re virtually maintenance-free. We believe so strongly in them, we back them with free lifetime replacement.
LIGHTWEIGHT PREMIUM CARBON
All our bikes are built from the highest grade materials and optimized for the best strength, weight, stiffness, and ride performance?—?no matter how much you spend. The HD6 frame is sub 6 lbs without shock and our complete Enduro ready builds weigh as little as 32 lbs.
INTERNAL CABLE ROUTING
Bikes that look pretty on the outside should look pretty on the inside. We use carbon fiber tubes molded within each frame. Push the cable in, watch it pop out?—?a beautiful moment indeed.
PROTECT YOUR INVESTMENT
A thick rubber downtube protector deflects debris, while our chainstay protector features thick raised sections to help dampen chain slap noise. And our simple-yet-elegant linkage protectors stop mud and rocks thrown by the tire, keeping your beautiful bike beautiful.
LIFETIME WARRANTY
If it’s our fault, we’ll fix it. Simple as that.
$7,125.00
$9,499.00
25% Off
RIPMO
What if we took everybody’s favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And that’s exactly what we did for the Ripmo V2S. Active ingredients include: 29” wheels, berm-defying cornering tendencies, and a love for long rides.
GEOMETRY
The Ripmo and Ripmo AF share the same steep, 76-degree seat tube angle and a rangy but not stratospheric reach, which places riders centrally over the pedals. It makes for an efficient position that can go the long haul. The slack 64.9 headtube angle and 44mm reduced-off set fork doesn’t wander while climbing, and doesn’t hold you back descending. It works?—?all day up, all day down, all day in between.
REVISED SWINGARM
The Ripmo V2S features a new UDH dérailleur for maximum future compatibility and moves to a 55mm chain line. The wider chain line allows for a stiffer chainstay.
Mojo HD5/HD4/HD3/Mojo 4 & M3 Pork Chop Frame Bag works with the front aperture and are available in sizes Medium, or XL.
NOTE! The Pork Chop Bags fit the HD5 and Mojo 4 differently:
Medium size bag fits HD5 & Mojo 4 Small.
XL size bag fits both HD5 & Mojo 4 Large & XL frames.
The size Large bags are discontinued and all sold out.
$96.00
$120.00
20% Off
Here is our very own sleek integrated storage solution for Ripley V4, Ripmo 1 & 2 and the Ripmo AF. Stay tuned for Ripley AF bags to arrive.
$5,099.99
The Ripley AF is our beloved, category-defying, short-travel, singletrack-scorching Ripley - rendered in aluminum, with more aggressive geometry. All the sizzle and pop of the carbon Ripley, now available as a complete bike at a wallet friendly price.
MODERN GEOMETRY, PRECISE HANDLING
A trail-friendly 65.5-degree head angle and short (44mm) offset 130mm fork combined with 29” wheels makes for a super planted but still playful front end feel. A 76-degree seat tube angle puts your power directly to the pedals, while the short chainstays and pedal-friendly dw-link kinematics deliver that power without squandering a single watt.
UNIVERSAL DERAILLEUR HANGER
The Ripley AF UDH features a UDH (Universal Derailleur Hanger) for maximum drivetrain compatibility and moves to a 55mm chainline.
$5,099.99
RIPMO AF
The Ripmo AF (Aluminum Frame) brings the award-winning performance of the carbon Ripmo to a wider, rowdier audience. It’s everything we love from the carbon Ripmo, plus a few tweaks.
IT’S METAL
Over our long tenure from mountain biking’s awkward adolescence to its current anything-shreddy era, we’ve experimented with steel, aluminum and titanium—remember the Bow-Ti, the first superbike? We remember the metal times too, and it feels good to offer a premium ride experience to our broadening family of riders, courtesy of durable, affordable aluminum alloy.
UNIVERSAL DERAILLEUR HANGER
The Ripmo AF UDH features a UDH derailleur for maximum future compatibility and moves to a 55mm chain line. The wider chain line allows for a stiffer chainstay.
$6,825.00
$9,099.00
25% Off
The Ripley is our snappy, flickable, playful, fast, lightweight, and versatile 29” trail bike.
Its combination of modern geometry, a stiff lightweight carbon chassis, and 120mm of ultra efficient dw-link travel, means it’s equally happy popping off bonus lines as it is crushing all day epics.
$7,725.00
$10,299.00
25% Off
What if we took everybody’s favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And that’s exactly what we did for the Ripmo V2S. Active ingredients include: 29” wheels, berm-defying cornering tendencies, and a love for long rides.
GEOMETRY
The Ripmo and Ripmo AF share the same steep, 76-degree seat tube angle and a rangy but not stratospheric reach, which places riders centrally over the pedals. It makes for an efficient position that can go the long haul. The slack 64.9 headtube angle and 44mm reduced-off set fork doesn’t wander while climbing, and doesn’t hold you back descending. It works?—?all day up, all day down, all day in between.
REVISED SWINGARM
The Ripmo V2S features a new UDH dérailleur for maximum future compatibility and moves to a 55mm chain line. The wider chain line allows for a stiffer chainstay.
$4,350.00
$5,799.00
25% Off
The Ripmo AF (Aluminum Frame) brings the award-winning performance of the carbon Ripmo to a wider, rowdier audience. It’s everything we love from the carbon Ripmo, plus a few tweaks.
$7,695.00
$9,999.99
23% Off
Custom Ridley's Cycle build! Get a GX AXS T-Type Ripmo, factory Fox suspension, bomb proof Ibis wheels all for under $7700!
Only available at Ridley's Cycle. 0% financing eligible
Refer to Spec's for complete build details
The Ripmo and Ripmo AF share the same steep, 76-degree seat tube angle and a rangy but not stratospheric reach, which places riders centrally over the pedals. It makes for an efficient position that can go the long haul. The slack 64.9 headtube angle and 44mm reduced-off set fork doesn’t wander while climbing, and doesn’t hold you back descending. It works?—?all day up, all day down, all day in between.
The Ripmo V2S features a new UDH derailleur for maximum future compatibility and moves to a 55mm chain line. The wider chain line allows for a stiffer chainstay.
The Ripmo V2S is compatible with both coil and air shocks due to a more progressive leverage rate. On the trail, it gives the suspension a supple feel throughout the entirety of the stroke, enhancing traction no matter how deep you dig.
Page 1 of 1