Skip to main content

Filter By:

Your Search: "ripmo"

Ibis Ripmo V2 SLX w/ Alum Wheels
$7,279.00
If you wondered when the carbon Ripmo would get AF’d, well, you can stop wondering, the NEW Ripmo V2 is here. We’ve made it a full degree slacker, a little bit longer, stiffer, and added progressivity for coil compatibility. Just like the original, our newest Ripmo was developed under the demands of competition. Robin Wallner rode a disguised Ripmo V2 to four top-ten finishes during the 2019 EWS season. To start, we gave the V2 a more progressive end rate with more ramp up, which eliminates bottom-out worries for hard-chargers. And that opens the door for a coil shock. And the initial leverage ratio is now a little higher for improved small bump performance, eliminating trail chatter. But life isn’t just a magic carpet ride of epic descents. To go down, you have to go up. The original Ripmo was just as lauded for climbing as it was for floating above tech. The V2 maintains the Ripmo’s reputation for uncanny climbing capabilities. Climb a Ripmo V2 and a Ripmo back to back and you won’t notice a difference. Downhill is another matter. We went one-degree slacker for the head angle, kept the stack height the same, and added just a few millimeters of reach to round things off (471 to 475mm on a size L). We tested this geometry with the Ripmo AF and it’s been universally lauded—nothing holds you back descending (rock rolls, drops, root gnarls) but you’re not piloting a dump truck climbing singletrack switchbacks. It shreds and climbs. Since we increased the Ripmo V2’s capability, we thought it only wise to beef up its protection. It’s a beautiful carbon frame, might as well keep it that way. We’ve added linkage guards that protect the upper and lower linkages from contamination, while covertly hiding between the front and rear triangles. And despite all the AF updates to the Ripmo V2, we kept its weight to a svelte 6.25 lbs. for a size medium with Fox DPX2. With completes starting at 28 lbs, the Ripmo is just as much the all-day climber it’s been, just with more snarl and menace on the descent. With the Ripmo V2, you have the very best Ripmo we can make. It incorporates the geometry we perfected on the Ripmo AF. It fits 29 x 2.6” tires, a full-size water bottle, cloudlike climbability, and it has a progressive end stroke for coil-shock compatibility. It touts our 7-year frame warranty and lifetime warranty on IGUS bushings. And most importantly, it won’t hold you back. On anything. And yep, it’s available now.
Ibis Ripmo V2 GX w/ Alum Wheels
$7,699.00
If you wondered when the carbon Ripmo would get AF’d, well, you can stop wondering, the NEW Ripmo V2 is here. We’ve made it a full degree slacker, a little bit longer, stiffer, and added progressivity for coil compatibility. Just like the original, our newest Ripmo was developed under the demands of competition. Robin Wallner rode a disguised Ripmo V2 to four top-ten finishes during the 2019 EWS season. To start, we gave the V2 a more progressive end rate with more ramp up, which eliminates bottom-out worries for hard-chargers. And that opens the door for a coil shock. And the initial leverage ratio is now a little higher for improved small bump performance, eliminating trail chatter. But life isn’t just a magic carpet ride of epic descents. To go down, you have to go up. The original Ripmo was just as lauded for climbing as it was for floating above tech. The V2 maintains the Ripmo’s reputation for uncanny climbing capabilities. Climb a Ripmo V2 and a Ripmo back to back and you won’t notice a difference. Downhill is another matter. We went one-degree slacker for the head angle, kept the stack height the same, and added just a few millimeters of reach to round things off (471 to 475mm on a size L). We tested this geometry with the Ripmo AF and it’s been universally lauded—nothing holds you back descending (rock rolls, drops, root gnarls) but you’re not piloting a dump truck climbing singletrack switchbacks. It shreds and climbs. Since we increased the Ripmo V2’s capability, we thought it only wise to beef up its protection. It’s a beautiful carbon frame, might as well keep it that way. We’ve added linkage guards that protect the upper and lower linkages from contamination, while covertly hiding between the front and rear triangles. And despite all the AF updates to the Ripmo V2, we kept its weight to a svelte 6.25 lbs. for a size medium with Fox DPX2. With completes starting at 28 lbs, the Ripmo is just as much the all-day climber it’s been, just with more snarl and menace on the descent. With the Ripmo V2, you have the very best Ripmo we can make. It incorporates the geometry we perfected on the Ripmo AF. It fits 29 x 2.6” tires, a full-size water bottle, cloudlike climbability, and it has a progressive end stroke for coil-shock compatibility. It touts our 7-year frame warranty and lifetime warranty on IGUS bushings. And most importantly, it won’t hold you back. On anything. And yep, it’s available now.
Ibis Ripmo V2 XO1 w/ Alum Wheels
$11,619.00
If you wondered when the carbon Ripmo would get AF’d, well, you can stop wondering, the NEW Ripmo V2 is here. We’ve made it a full degree slacker, a little bit longer, stiffer, and added progressivity for coil compatibility. Just like the original, our newest Ripmo was developed under the demands of competition. Robin Wallner rode a disguised Ripmo V2 to four top-ten finishes during the 2019 EWS season. To start, we gave the V2 a more progressive end rate with more ramp up, which eliminates bottom-out worries for hard-chargers. And that opens the door for a coil shock. And the initial leverage ratio is now a little higher for improved small bump performance, eliminating trail chatter. But life isn’t just a magic carpet ride of epic descents. To go down, you have to go up. The original Ripmo was just as lauded for climbing as it was for floating above tech. The V2 maintains the Ripmo’s reputation for uncanny climbing capabilities. Climb a Ripmo V2 and a Ripmo back to back and you won’t notice a difference. Downhill is another matter. We went one-degree slacker for the head angle, kept the stack height the same, and added just a few millimeters of reach to round things off (471 to 475mm on a size L). We tested this geometry with the Ripmo AF and it’s been universally lauded—nothing holds you back descending (rock rolls, drops, root gnarls) but you’re not piloting a dump truck climbing singletrack switchbacks. It shreds and climbs. Since we increased the Ripmo V2’s capability, we thought it only wise to beef up its protection. It’s a beautiful carbon frame, might as well keep it that way. We’ve added linkage guards that protect the upper and lower linkages from contamination, while covertly hiding between the front and rear triangles. And despite all the AF updates to the Ripmo V2, we kept its weight to a svelte 6.25 lbs. for a size medium with Fox DPX2. With completes starting at 28 lbs, the Ripmo is just as much the all-day climber it’s been, just with more snarl and menace on the descent. With the Ripmo V2, you have the very best Ripmo we can make. It incorporates the geometry we perfected on the Ripmo AF. It fits 29 x 2.6” tires, a full-size water bottle, cloudlike climbability, and it has a progressive end stroke for coil-shock compatibility. It touts our 7-year frame warranty and lifetime warranty on IGUS bushings. And most importantly, it won’t hold you back. On anything. And yep, it’s available now.
Ibis Ripmo V2 XT w/ Alum Wheels
$8,259.00
If you wondered when the carbon Ripmo would get AF’d, well, you can stop wondering, the NEW Ripmo V2 is here. We’ve made it a full degree slacker, a little bit longer, stiffer, and added progressivity for coil compatibility. Just like the original, our newest Ripmo was developed under the demands of competition. Robin Wallner rode a disguised Ripmo V2 to four top-ten finishes during the 2019 EWS season. To start, we gave the V2 a more progressive end rate with more ramp up, which eliminates bottom-out worries for hard-chargers. And that opens the door for a coil shock. And the initial leverage ratio is now a little higher for improved small bump performance, eliminating trail chatter. But life isn’t just a magic carpet ride of epic descents. To go down, you have to go up. The original Ripmo was just as lauded for climbing as it was for floating above tech. The V2 maintains the Ripmo’s reputation for uncanny climbing capabilities. Climb a Ripmo V2 and a Ripmo back to back and you won’t notice a difference. Downhill is another matter. We went one-degree slacker for the head angle, kept the stack height the same, and added just a few millimeters of reach to round things off (471 to 475mm on a size L). We tested this geometry with the Ripmo AF and it’s been universally lauded—nothing holds you back descending (rock rolls, drops, root gnarls) but you’re not piloting a dump truck climbing singletrack switchbacks. It shreds and climbs. Since we increased the Ripmo V2’s capability, we thought it only wise to beef up its protection. It’s a beautiful carbon frame, might as well keep it that way. We’ve added linkage guards that protect the upper and lower linkages from contamination, while covertly hiding between the front and rear triangles. And despite all the AF updates to the Ripmo V2, we kept its weight to a svelte 6.25 lbs. for a size medium with Fox DPX2. With completes starting at 28 lbs, the Ripmo is just as much the all-day climber it’s been, just with more snarl and menace on the descent. With the Ripmo V2, you have the very best Ripmo we can make. It incorporates the geometry we perfected on the Ripmo AF. It fits 29 x 2.6” tires, a full-size water bottle, cloudlike climbability, and it has a progressive end stroke for coil-shock compatibility. It touts our 7-year frame warranty and lifetime warranty on IGUS bushings. And most importantly, it won’t hold you back. On anything. And yep, it’s available now.
Ibis Ripmo V2 NX w/ Alum Wheels
$6,159.00
If you wondered when the carbon Ripmo would get AF’d, well, you can stop wondering, the NEW Ripmo V2 is here. We’ve made it a full degree slacker, a little bit longer, stiffer, and added progressivity for coil compatibility. Just like the original, our newest Ripmo was developed under the demands of competition. Robin Wallner rode a disguised Ripmo V2 to four top-ten finishes during the 2019 EWS season. To start, we gave the V2 a more progressive end rate with more ramp up, which eliminates bottom-out worries for hard-chargers. And that opens the door for a coil shock. And the initial leverage ratio is now a little higher for improved small bump performance, eliminating trail chatter. But life isn’t just a magic carpet ride of epic descents. To go down, you have to go up. The original Ripmo was just as lauded for climbing as it was for floating above tech. The V2 maintains the Ripmo’s reputation for uncanny climbing capabilities. Climb a Ripmo V2 and a Ripmo back to back and you won’t notice a difference. Downhill is another matter. We went one-degree slacker for the head angle, kept the stack height the same, and added just a few millimeters of reach to round things off (471 to 475mm on a size L). We tested this geometry with the Ripmo AF and it’s been universally lauded—nothing holds you back descending (rock rolls, drops, root gnarls) but you’re not piloting a dump truck climbing singletrack switchbacks. It shreds and climbs. Since we increased the Ripmo V2’s capability, we thought it only wise to beef up its protection. It’s a beautiful carbon frame, might as well keep it that way. We’ve added linkage guards that protect the upper and lower linkages from contamination, while covertly hiding between the front and rear triangles. And despite all the AF updates to the Ripmo V2, we kept its weight to a svelte 6.25 lbs. for a size medium with Fox DPX2. With completes starting at 28 lbs, the Ripmo is just as much the all-day climber it’s been, just with more snarl and menace on the descent. With the Ripmo V2, you have the very best Ripmo we can make. It incorporates the geometry we perfected on the Ripmo AF. It fits 29 x 2.6” tires, a full-size water bottle, cloudlike climbability, and it has a progressive end stroke for coil-shock compatibility. It touts our 7-year frame warranty and lifetime warranty on IGUS bushings. And most importantly, it won’t hold you back. On anything. And yep, it’s available now.
Ibis Ripmo AF DVO Jade Coil GX
$6,159.00
The Ripmo AF (Aluminum Frame) brings the award-winning performance of the carbon Ripmo to a wider, rowdier audience. It’s everything we love from the carbon Ripmo, plus a few tweaks. Best of all, complete bikes start at only $4020 IT’S METAL Over our long tenure from moun­tain biking’s awk­ward ado­les­cence to its cur­rent any­thing-shred­dy era, we’ve exper­i­ment­ed with steel, alu­minum and tita­ni­um?—?remem­ber the Bow-Ti, the first super­bike? We remem­ber the met­al times too, and it feels good to offer a pre­mi­um ride expe­ri­ence to our broad­en­ing fam­i­ly of rid­ers, cour­tesy of durable, afford­able alu­minum alloy. MODERN GEOMETRY With a steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, the Rip­mo AF places rid­ers cen­tral­ly and upright over the bot­tom brack­et. It makes for an effi­cient posi­tion that can go the long haul with­out plac­ing too much weight on its slack, 64.9-degree head­tube angle. A 44mm reduced-off­set fork is more sure­foot­ed on steep descents and stead­ies high speeds. Bet­ter up, bet­ter down. DW LINK Since 2005, we’ve part­nered with sus­pen­sion guru Dave Wea­gle on the dw-link sus­pen­sion plat­form. It pro­vides an unpar­al­leled com­bi­na­tion of climb­ing effi­cien­cy and down­hill per­for­mance, which has been proven repeat­ed­ly at the high­est lev­els of racing.
Ibis Ripmo AF DVO Jade Coil SLX
$5,740.00
The Ripmo AF (Aluminum Frame) brings the award-winning performance of the carbon Ripmo to a wider, rowdier audience. It’s everything we love from the carbon Ripmo, plus a few tweaks. Best of all, complete bikes start at only $4020 IT’S METAL Over our long tenure from moun­tain biking’s awk­ward ado­les­cence to its cur­rent any­thing-shred­dy era, we’ve exper­i­ment­ed with steel, alu­minum and tita­ni­um?—?remem­ber the Bow-Ti, the first super­bike? We remem­ber the met­al times too, and it feels good to offer a pre­mi­um ride expe­ri­ence to our broad­en­ing fam­i­ly of rid­ers, cour­tesy of durable, afford­able alu­minum alloy. MODERN GEOMETRY With a steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, the Rip­mo AF places rid­ers cen­tral­ly and upright over the bot­tom brack­et. It makes for an effi­cient posi­tion that can go the long haul with­out plac­ing too much weight on its slack, 64.9-degree head­tube angle. A 44mm reduced-off­set fork is more sure­foot­ed on steep descents and stead­ies high speeds. Bet­ter up, bet­ter down. DW LINK Since 2005, we’ve part­nered with sus­pen­sion guru Dave Wea­gle on the dw-link sus­pen­sion plat­form. It pro­vides an unpar­al­leled com­bi­na­tion of climb­ing effi­cien­cy and down­hill per­for­mance, which has been proven repeat­ed­ly at the high­est lev­els of racing.
Ibis Ripmo AF DVO Topaz Air GX
$6,019.00
The Ripmo AF (Aluminum Frame) brings the award-winning performance of the carbon Ripmo to a wider, rowdier audience. It’s everything we love from the carbon Ripmo, plus a few tweaks. Best of all, complete bikes start at only $4020 IT’S METAL Over our long tenure from moun­tain biking’s awk­ward ado­les­cence to its cur­rent any­thing-shred­dy era, we’ve exper­i­ment­ed with steel, alu­minum and tita­ni­um?—?remem­ber the Bow-Ti, the first super­bike? We remem­ber the met­al times too, and it feels good to offer a pre­mi­um ride expe­ri­ence to our broad­en­ing fam­i­ly of rid­ers, cour­tesy of durable, afford­able alu­minum alloy. MODERN GEOMETRY With a steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, the Rip­mo AF places rid­ers cen­tral­ly and upright over the bot­tom brack­et. It makes for an effi­cient posi­tion that can go the long haul with­out plac­ing too much weight on its slack, 64.9-degree head­tube angle. A 44mm reduced-off­set fork is more sure­foot­ed on steep descents and stead­ies high speeds. Bet­ter up, bet­ter down. DW LINK Since 2005, we’ve part­nered with sus­pen­sion guru Dave Wea­gle on the dw-link sus­pen­sion plat­form. It pro­vides an unpar­al­leled com­bi­na­tion of climb­ing effi­cien­cy and down­hill per­for­mance, which has been proven repeat­ed­ly at the high­est lev­els of racing.
Ibis Ripmo AF DVO Topaz Air SLX
$5,599.00
The Ripmo AF (Aluminum Frame) brings the award-winning performance of the carbon Ripmo to a wider, rowdier audience. It’s everything we love from the carbon Ripmo, plus a few tweaks. Best of all, complete bikes start at only $4020 IT’S METAL Over our long tenure from moun­tain biking’s awk­ward ado­les­cence to its cur­rent any­thing-shred­dy era, we’ve exper­i­ment­ed with steel, alu­minum and tita­ni­um?—?remem­ber the Bow-Ti, the first super­bike? We remem­ber the met­al times too, and it feels good to offer a pre­mi­um ride expe­ri­ence to our broad­en­ing fam­i­ly of rid­ers, cour­tesy of durable, afford­able alu­minum alloy. MODERN GEOMETRY With a steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, the Rip­mo AF places rid­ers cen­tral­ly and upright over the bot­tom brack­et. It makes for an effi­cient posi­tion that can go the long haul with­out plac­ing too much weight on its slack, 64.9-degree head­tube angle. A 44mm reduced-off­set fork is more sure­foot­ed on steep descents and stead­ies high speeds. Bet­ter up, bet­ter down. DW LINK Since 2005, we’ve part­nered with sus­pen­sion guru Dave Wea­gle on the dw-link sus­pen­sion plat­form. It pro­vides an unpar­al­leled com­bi­na­tion of climb­ing effi­cien­cy and down­hill per­for­mance, which has been proven repeat­ed­ly at the high­est lev­els of racing.
Ibis Ripmo AF DVO Topaz Air NX
$4,199.00
The Ripmo AF (Aluminum Frame) brings the award-winning performance of the carbon Ripmo to a wider, rowdier audience. It’s everything we love from the carbon Ripmo, plus a few tweaks. Best of all, complete bikes start at only $4020 IT’S METAL Over our long tenure from moun­tain biking’s awk­ward ado­les­cence to its cur­rent any­thing-shred­dy era, we’ve exper­i­ment­ed with steel, alu­minum and tita­ni­um?—?remem­ber the Bow-Ti, the first super­bike? We remem­ber the met­al times too, and it feels good to offer a pre­mi­um ride expe­ri­ence to our broad­en­ing fam­i­ly of rid­ers, cour­tesy of durable, afford­able alu­minum alloy. MODERN GEOMETRY With a steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, the Rip­mo AF places rid­ers cen­tral­ly and upright over the bot­tom brack­et. It makes for an effi­cient posi­tion that can go the long haul with­out plac­ing too much weight on its slack, 64.9-degree head­tube angle. A 44mm reduced-off­set fork is more sure­foot­ed on steep descents and stead­ies high speeds. Bet­ter up, bet­ter down. DW LINK Since 2005, we’ve part­nered with sus­pen­sion guru Dave Wea­gle on the dw-link sus­pen­sion plat­form. It pro­vides an unpar­al­leled com­bi­na­tion of climb­ing effi­cien­cy and down­hill per­for­mance, which has been proven repeat­ed­ly at the high­est lev­els of racing.
Ibis Ripmo - XT w/aluminum wheels
$7,899.99
The love child of a Ripley and the Mojo HD4, the all-new Ripmo is a big wheeled slasher that’s always down for another lap, whether that means a big climb or a tailgate pad. Think of it as a mashup of the Ripley's balance and speed, coupled with the Mojo HD4's capabilities when things get hairy. With a sub six pound frame and 145mm of effi­cient dw-link rear wheel trav­el (160mm front), this is the most ver­sa­tile bike we’ve ever built. It also marks a dra­mat­ic shift in our approach to geom­e­try. The reach is near­ly an inch longer than the EWS Team win­ning HD4, with clear­ance for a 175mm drop­per, and a ped­al-friend­ly 76° seat tube angle. The end result is a bike that’s ready to ral­ly, while still main­tain­ing live­ly handling. Tick­ing off the box­es, oth­er fea­tures include 2.6” tire clear­ance, short chain­stays, a thread­ed BB, trick inter­nal cable rout­ing and the abil­i­ty to run both a pig­gy­back reser­voir shock and large water bottle.
Ibis Ripmo - GX Eagle w/aluminum wheels
$7,699.00
The love child of a Ripley and the Mojo HD4, the all-new Ripmo is a big wheeled slasher that’s always down for another lap, whether that means a big climb or a tailgate pad. Think of it as a mashup of the Ripley's balance and speed, coupled with the Mojo HD4's capabilities when things get hairy. With a sub six pound frame and 145mm of effi­cient dw-link rear wheel trav­el (160mm front), this is the most ver­sa­tile bike we’ve ever built. It also marks a dra­mat­ic shift in our approach to geom­e­try. The reach is near­ly an inch longer than the EWS Team win­ning HD4, with clear­ance for a 175mm drop­per, and a ped­al-friend­ly 76° seat tube angle. The end result is a bike that’s ready to ral­ly, while still main­tain­ing live­ly handling. Tick­ing off the box­es, oth­er fea­tures include 2.6” tire clear­ance, short chain­stays, a thread­ed BB, trick inter­nal cable rout­ing and the abil­i­ty to run both a pig­gy­back reser­voir shock and large water bottle.
Ibis Ripmo - XO1 AXS w/aluminum wheels
$11,199.99
The love child of a Ripley and the Mojo HD4, the all-new Ripmo is a big wheeled slasher that’s always down for another lap, whether that means a big climb or a tailgate pad. Think of it as a mashup of the Ripley's balance and speed, coupled with the Mojo HD4's capabilities when things get hairy. With a sub six pound frame and 145mm of effi­cient dw-link rear wheel trav­el (160mm front), this is the most ver­sa­tile bike we’ve ever built. It also marks a dra­mat­ic shift in our approach to geom­e­try. The reach is near­ly an inch longer than the EWS Team win­ning HD4, with clear­ance for a 175mm drop­per, and a ped­al-friend­ly 76° seat tube angle. The end result is a bike that’s ready to ral­ly, while still main­tain­ing live­ly handling. Tick­ing off the box­es, oth­er fea­tures include 2.6” tire clear­ance, short chain­stays, a thread­ed BB, trick inter­nal cable rout­ing and the abil­i­ty to run both a pig­gy­back reser­voir shock and large water bottle.
Ibis Ripmo - NX Eagle w/ aluminum wheels
$5,899.99
The love child of a Ripley and the Mojo HD4, the all-new Ripmo is a big wheeled slasher that’s always down for another lap, whether that means a big climb or a tailgate pad. Think of it as a mashup of the Ripley's balance and speed, coupled with the Mojo HD4's capabilities when things get hairy. With a sub six pound frame and 145mm of effi­cient dw-link rear wheel trav­el (160mm front), this is the most ver­sa­tile bike we’ve ever built. It also marks a dra­mat­ic shift in our approach to geom­e­try. The reach is near­ly an inch longer than the EWS Team win­ning HD4, with clear­ance for a 175mm drop­per, and a ped­al-friend­ly 76° seat tube angle. The end result is a bike that’s ready to ral­ly, while still main­tain­ing live­ly handling. Tick­ing off the box­es, oth­er fea­tures include 2.6” tire clear­ance, short chain­stays, a thread­ed BB, trick inter­nal cable rout­ing and the abil­i­ty to run both a pig­gy­back reser­voir shock and large water bottle.
Ibis RIPMO - XO1 - Carbon I9 Wheels
$10,999.99
With a sub six pound frame and 145mm of efficient dw-link rear wheel travel (160mm front), this is the most versatile bike we’ve ever built. It also marks a dramatic shift in our approach to geometry. The reach is nearly an inch longer than the EWS Team winning HD4, with clearance for a 175mm dropper, and a pedal-friendly 76° seat tube angle. The end result is a bike that’s ready to rally, while still maintaining lively handling. Ticking off the boxes, other features include 2.6” tire clearance, short chainstays, a threaded BB, trick internal cable routing and the ability to run both a piggyback reservoir shock and large water bottle.
RockShox Super Deluxe Coil Ultimate
$734.00 - $850.99
With the Super Deluxe Coil Ultimate, no-nonsense performance is the name of the game. The Super Deluxe Coil Ultimate was designed to meet all the demands of the latest and greatest hard-hitting enduro and trail bikes. Featuring Maxima Plush fluid, this shock offers solid threshold adjustment for pedaling performance, ride quality, and compression adjustment to fine-tune for any condition. It's got the unmistakable feel of a coil spring all packed into RockShox's Super Deluxe design. - Separate and independent open and threshold pistons tuned exactly for your ride - Low-Speed Compression adjustment allowing fine-tuning of compression needs from the base tune - Maxima Plush damping fluid reduces friction and silences damper noise - BoXXer Red coil Signature color option (sold separately)
Ibis Ripley 4 - SLX w/aluminum wheels
$6,899.99 - $7,139.00
When we debuted the category-bending Ripley back in 2011, it was used by some as a cross country rocket and by others as a trail shredder. With quick agile handling and super efficient pedaling characteristics, it felt like a BMX bike you could pedal all day. Our athletes quickly discovered just how versatile it could be. While Brian Lopes was racing an O.G. Ripley to a top fifteen result at his first EWS race, others were winning hundred mile epics. As riders pushed the bike in different differections and components evolved, so did the Ripley. The all new Ripley continues that trend. It’s been given the modern longer, slacker, steeper treatment, with an all new chassis that’s both lighter, stiffer, and more progressive. Like the original, it retains 120mm of rear travel, paired with a 130mm front fork, and fast rolling 29” wheels. The “from the ground up” redesign is the culmination of everything we’ve learned from 38 years of mountain bike development. This new Ripley has a one degree slacker headtube angle (now 66.5º), a three degree steeper seat tube angle (now 76º), and a reach that’s been extended by ~45mm across all sizes (475mm on a size large). We also shaved half a pound off the frame, shortened the chainstays by 12mm, increased stiffness, and made the suspension more progressive while maintaining the incredible pedaling characteristics Despite all these changes, the Ripley remains the same snappy, flickable, playful, fast, lightweight, and versatile trail bike it’s always been. In the process of developing the new Ripley, we shed the double eccentric design. While that design was revolutionary, it took up substantial room in the seat tube. And after giving many riders (M-XL) their first taste of 170mm + droppers on the Ripmo, we knew we couldn’t go back to a shorter dropper. Because the new Ripley can accommodate a long dropper and has ultra low standover, you can size your frame based on reach. We still use the standard “small, medium, large…” naming structure because it’s easy to understand, but the size of your seat tube is no longer a limiting factor. Moving from the double eccentric to a Ripmo style chassis also came with significant weight savings. One big factor is our unique combination of bearings and bushings. Bearings don’t last long in areas with high loads and minimal rotation, like our lower link or clevis. We’ve used hermetically sealed IGUS bushings in these locations, which extends our maintenance intervals, increases stiffness, and helps ensure we have some of the lightest frames on the market. The Ripmo has been trouble free, so the Ripley will share the lifetime warranty we offer on our suspension bushings. If you love the Ripmo but want something lighter, faster and more nimble than an Enduro World Series capable mountain bike, the Ripley is it. With its combination of modern geometry, progressive suspension, light weight, and 2.6” tire clearance, the Ripley is our ultimate trail bike.
Ibis Ripley 4 - XT w/aluminum wheels
$8,119.00
When we debuted the category-bending Ripley back in 2011, it was used by some as a cross country rocket and by others as a trail shredder. With quick agile handling and super efficient pedaling characteristics, it felt like a BMX bike you could pedal all day. Our athletes quickly discovered just how versatile it could be. While Brian Lopes was racing an O.G. Ripley to a top fifteen result at his first EWS race, others were winning hundred mile epics. As riders pushed the bike in different differections and components evolved, so did the Ripley. The all new Ripley continues that trend. It’s been given the modern longer, slacker, steeper treatment, with an all new chassis that’s both lighter, stiffer, and more progressive. Like the original, it retains 120mm of rear travel, paired with a 130mm front fork, and fast rolling 29” wheels. The “from the ground up” redesign is the culmination of everything we’ve learned from 38 years of mountain bike development. This new Ripley has a one degree slacker headtube angle (now 66.5º), a three degree steeper seat tube angle (now 76º), and a reach that’s been extended by ~45mm across all sizes (475mm on a size large). We also shaved half a pound off the frame, shortened the chainstays by 12mm, increased stiffness, and made the suspension more progressive while maintaining the incredible pedaling characteristics Despite all these changes, the Ripley remains the same snappy, flickable, playful, fast, lightweight, and versatile trail bike it’s always been. In the process of developing the new Ripley, we shed the double eccentric design. While that design was revolutionary, it took up substantial room in the seat tube. And after giving many riders (M-XL) their first taste of 170mm + droppers on the Ripmo, we knew we couldn’t go back to a shorter dropper. Because the new Ripley can accommodate a long dropper and has ultra low standover, you can size your frame based on reach. We still use the standard “small, medium, large…” naming structure because it’s easy to understand, but the size of your seat tube is no longer a limiting factor. Moving from the double eccentric to a Ripmo style chassis also came with significant weight savings. One big factor is our unique combination of bearings and bushings. Bearings don’t last long in areas with high loads and minimal rotation, like our lower link or clevis. We’ve used hermetically sealed IGUS bushings in these locations, which extends our maintenance intervals, increases stiffness, and helps ensure we have some of the lightest frames on the market. The Ripmo has been trouble free, so the Ripley will share the lifetime warranty we offer on our suspension bushings. If you love the Ripmo but want something lighter, faster and more nimble than an Enduro World Series capable mountain bike, the Ripley is it. With its combination of modern geometry, progressive suspension, light weight, and 2.6” tire clearance, the Ripley is our ultimate trail bike.
Ibis Ripley 4 - GX Eagle w/aluminum wheels
$7,559.00
When we debuted the category-bending Ripley back in 2011, it was used by some as a cross country rocket and by others as a trail shredder. With quick agile handling and super efficient pedaling characteristics, it felt like a BMX bike you could pedal all day. Our athletes quickly discovered just how versatile it could be. While Brian Lopes was racing an O.G. Ripley to a top fifteen result at his first EWS race, others were winning hundred mile epics. As riders pushed the bike in different differections and components evolved, so did the Ripley. The all new Ripley continues that trend. It’s been given the modern longer, slacker, steeper treatment, with an all new chassis that’s both lighter, stiffer, and more progressive. Like the original, it retains 120mm of rear travel, paired with a 130mm front fork, and fast rolling 29” wheels. The “from the ground up” redesign is the culmination of everything we’ve learned from 38 years of mountain bike development. This new Ripley has a one degree slacker headtube angle (now 66.5º), a three degree steeper seat tube angle (now 76º), and a reach that’s been extended by ~45mm across all sizes (475mm on a size large). We also shaved half a pound off the frame, shortened the chainstays by 12mm, increased stiffness, and made the suspension more progressive while maintaining the incredible pedaling characteristics Despite all these changes, the Ripley remains the same snappy, flickable, playful, fast, lightweight, and versatile trail bike it’s always been. In the process of developing the new Ripley, we shed the double eccentric design. While that design was revolutionary, it took up substantial room in the seat tube. And after giving many riders (M-XL) their first taste of 170mm + droppers on the Ripmo, we knew we couldn’t go back to a shorter dropper. Because the new Ripley can accommodate a long dropper and has ultra low standover, you can size your frame based on reach. We still use the standard “small, medium, large…” naming structure because it’s easy to understand, but the size of your seat tube is no longer a limiting factor. Moving from the double eccentric to a Ripmo style chassis also came with significant weight savings. One big factor is our unique combination of bearings and bushings. Bearings don’t last long in areas with high loads and minimal rotation, like our lower link or clevis. We’ve used hermetically sealed IGUS bushings in these locations, which extends our maintenance intervals, increases stiffness, and helps ensure we have some of the lightest frames on the market. The Ripmo has been trouble free, so the Ripley will share the lifetime warranty we offer on our suspension bushings. If you love the Ripmo but want something lighter, faster and more nimble than an Enduro World Series capable mountain bike, the Ripley is it. With its combination of modern geometry, progressive suspension, light weight, and 2.6” tire clearance, the Ripley is our ultimate trail bike.
Ibis Ripley 4 - X01 AXS w/aluminum wheels
$11,479.00
When we debuted the category-bending Ripley back in 2011, it was used by some as a cross country rocket and by others as a trail shredder. With quick agile handling and super efficient pedaling characteristics, it felt like a BMX bike you could pedal all day. Our athletes quickly discovered just how versatile it could be. While Brian Lopes was racing an O.G. Ripley to a top fifteen result at his first EWS race, others were winning hundred mile epics. As riders pushed the bike in different differections and components evolved, so did the Ripley. The all new Ripley continues that trend. It’s been given the modern longer, slacker, steeper treatment, with an all new chassis that’s both lighter, stiffer, and more progressive. Like the original, it retains 120mm of rear travel, paired with a 130mm front fork, and fast rolling 29” wheels. The “from the ground up” redesign is the culmination of everything we’ve learned from 38 years of mountain bike development. This new Ripley has a one degree slacker headtube angle (now 66.5º), a three degree steeper seat tube angle (now 76º), and a reach that’s been extended by ~45mm across all sizes (475mm on a size large). We also shaved half a pound off the frame, shortened the chainstays by 12mm, increased stiffness, and made the suspension more progressive while maintaining the incredible pedaling characteristics Despite all these changes, the Ripley remains the same snappy, flickable, playful, fast, lightweight, and versatile trail bike it’s always been. In the process of developing the new Ripley, we shed the double eccentric design. While that design was revolutionary, it took up substantial room in the seat tube. And after giving many riders (M-XL) their first taste of 170mm + droppers on the Ripmo, we knew we couldn’t go back to a shorter dropper. Because the new Ripley can accommodate a long dropper and has ultra low standover, you can size your frame based on reach. We still use the standard “small, medium, large…” naming structure because it’s easy to understand, but the size of your seat tube is no longer a limiting factor. Moving from the double eccentric to a Ripmo style chassis also came with significant weight savings. One big factor is our unique combination of bearings and bushings. Bearings don’t last long in areas with high loads and minimal rotation, like our lower link or clevis. We’ve used hermetically sealed IGUS bushings in these locations, which extends our maintenance intervals, increases stiffness, and helps ensure we have some of the lightest frames on the market. The Ripmo has been trouble free, so the Ripley will share the lifetime warranty we offer on our suspension bushings. If you love the Ripmo but want something lighter, faster and more nimble than an Enduro World Series capable mountain bike, the Ripley is it. With its combination of modern geometry, progressive suspension, light weight, and 2.6” tire clearance, the Ripley is our ultimate trail bike. Ibis
Ibis Ripley 4 - NX Eagle w/aluminum wheels
$5,879.00
When we debuted the category-bending Ripley back in 2011, it was used by some as a cross country rocket and by others as a trail shredder. With quick agile handling and super efficient pedaling characteristics, it felt like a BMX bike you could pedal all day. Our athletes quickly discovered just how versatile it could be. While Brian Lopes was racing an O.G. Ripley to a top fifteen result at his first EWS race, others were winning hundred mile epics. As riders pushed the bike in different differections and components evolved, so did the Ripley. The all new Ripley continues that trend. It’s been given the modern longer, slacker, steeper treatment, with an all new chassis that’s both lighter, stiffer, and more progressive. Like the original, it retains 120mm of rear travel, paired with a 130mm front fork, and fast rolling 29” wheels. The “from the ground up” redesign is the culmination of everything we’ve learned from 38 years of mountain bike development. This new Ripley has a one degree slacker headtube angle (now 66.5º), a three degree steeper seat tube angle (now 76º), and a reach that’s been extended by ~45mm across all sizes (475mm on a size large). We also shaved half a pound off the frame, shortened the chainstays by 12mm, increased stiffness, and made the suspension more progressive while maintaining the incredible pedaling characteristics Despite all these changes, the Ripley remains the same snappy, flickable, playful, fast, lightweight, and versatile trail bike it’s always been. In the process of developing the new Ripley, we shed the double eccentric design. While that design was revolutionary, it took up substantial room in the seat tube. And after giving many riders (M-XL) their first taste of 170mm + droppers on the Ripmo, we knew we couldn’t go back to a shorter dropper. Because the new Ripley can accommodate a long dropper and has ultra low standover, you can size your frame based on reach. We still use the standard “small, medium, large…” naming structure because it’s easy to understand, but the size of your seat tube is no longer a limiting factor. Moving from the double eccentric to a Ripmo style chassis also came with significant weight savings. One big factor is our unique combination of bearings and bushings. Bearings don’t last long in areas with high loads and minimal rotation, like our lower link or clevis. We’ve used hermetically sealed IGUS bushings in these locations, which extends our maintenance intervals, increases stiffness, and helps ensure we have some of the lightest frames on the market. The Ripmo has been trouble free, so the Ripley will share the lifetime warranty we offer on our suspension bushings. If you love the Ripmo but want something lighter, faster and more nimble than an Enduro World Series capable mountain bike, the Ripley is it. With its combination of modern geometry, progressive suspension, light weight, and 2.6” tire clearance, the Ripley is our ultimate trail bike.
Page 1 of 1