Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Riser

Title mtb AH1 35 Handlebar
$109.95
FEATURES Rigorously tested by EFBE. Passed TRI-TEST® GR. Certified for freeride and downhill bikes Made from aerospace grade 7050 T74 aluminum Spiral butting technology (improves strength / reduces weight) Centre guidelines for easy stem alignment Cut guidelines on both ends of handlebar Smooth matte black finish SPECIFICATIONS 810mm width 35mm clamp diameter 8° Backsweep 5° Upsweep 25mm rise (370g) 38mm rise (370g) INTENDED USE All MTN / Enduro Downhill / Freeride Dirt Jump / Slopestyle Skatepark / Street
SQlab 30X 12-degree Aluminum MTB Handlebar
$162.50
The perfect combination of form, wall thickness and diameter, with the corresponding anatomically-optimized bend for various riding dynamics, make the SQlab 3OX handlebar series the most stable, as well as the lightest, bar in its field. SQlab's handlebars feature an ergonomic design that ensures the wrist is not overstretched, the carpal tunnel is not constricted and the supply to the hands is improved. The risk of sleepy and numb fingers is minimized and discomfort in index and middle fingers is reduced. The 12° backsweep, with its short reach, provides a natural transition from the lower arm to the hand when in a more upright riding position, thus protecting the wrist from the extreme strain of downhill riding. The 4° upsweep brings the elbows into a perfect position for a dynamic riding style. - Use: MTB, Gravity & E-Performance - 15mm, 30mm or 45mm rise options allow individualized positions - 31.8 clamp diameter
SQlab 30X 12-degree Carbon MTB Handlebar
$361.00
The perfect combination of form, wall thickness and diameter, with the corresponding anatomically-optimized bend for various riding dynamics, make the SQlab 3OX handlebar series the most stable as well as the lightest bar in its field. SQlab's handlebars feature an ergonomic design that ensures the wrist is not overstretched, the carpal tunnel is not constricted and the supply to the hands is improved. The risk of sleepy and numb fingers is minimized and discomfort in index and middle fingers is reduced. The 12° backsweep, with its short reach, provides a natural transition from the lower arm to the hand when in a more upright riding position, thus protecting the wrist from the extreme strain of downhill riding. The 4° upsweep brings the elbows into a perfect position for a dynamic riding style. - Use: MTB, Gravity & E-Performance - 15mm, 30mm or 45mm rise options allow individualized positions - 31.8 clamp diameter
SQlab 30X 16-degree Aluminum MTB Handlebar
$162.50
The perfect combination of form, wall thickness and diameter with the corresponding anatomically-optimized bend for various riding dynamics, make the SQlab 3OX handlebar series the most stable as well as the lightest bar in its field. SQlab's handlebars feature an ergonomic design that ensures the wrist is not overstretched, the carpal tunnel is not constricted and the supply to the hands is improved. The risk of sleepy and numb fingers is minimized and discomfort in index and middle fingers is reduced. The 16° backsweep, with its short reach, provides a natural transition from the lower arm to the hand when in a more stretched riding position, while the 4° upsweep brings the elbows into a perfect position for a dynamic riding style. - 15mm, 30mm or 45mm rise allow individualized positions - 31.8 clamp diameter
Renthal Fatbar 35
$134.99 - $159.99
- High strength 7 series Aluminium Alloy - Shot peened for increased fatigue life - Corrosion and abrasion resistant hard anodized finish - Laser etched positioning grid for easy set up - Width marks allow personalized fit adjustment - Permanent Graphics
OneUp Components Carbon Handlebar
$189.50
ONEUP CARBON BARS. Strong, lightweight & vertically compliant. The goal for the new OneUp Carbon Handlebars was to make the best feeling bar possible, something which would let us ride harder for longer. The solution is our patent pending oval shape which combines the best ride characteristics of 31.8mm and 35mm bar standards into one package. This is the most comfortable bar we’ve ever ridden, period. It's strong, lightweight, minimizes arm pump and vibration and maximize steering response. 35 done right. Almost every other carbon bar on the market copies the simple tapered profile of an Aluminum bar. With carbon you can take advantage of more complex shapes to get a better performing product, so that's what we did. If you actually care about bar compliance, then you don't make a regular 35mm diameter bar. Sure you can try to "optimize" the flex slightly with layup, but geometry is king and you're fighting a losing battle. The OneUp bar profile minimizes the length of the 35 diameter clamping area as this is the stiffest portion of any 35 diameter bar. The 35mm clamp diameter quickly changes to a flattened, oval shape in the transition zone and then to a standard 22.2mm clamp diameter for the control zone. We benchmarked the OneUp bar against the most popular carbon bars on the market as well as foam filled aluminum bars. The results were, on average, a 21% increase in vertical compliance (comfort) coupled with a 28% increase in steering stiffness (responsiveness). These are more than just marginal gains. Until now the 35mm diameter standard has had a bad reputation and rightly so. This is 35 Dia. done right. SPECS - Geometry: 800mm Wide / 35mm Dia. / Sweep 8° Back 5° Up - Weight: 20mm Rise (220g) 35mm Rise (225g) - Max Stem Clamp Width: 65mm - Max Control Torque: 5Nm - Minimum Trim width: 740mm - Colour: Black. Decal kits: Available in Red, Green, Blue, Orange, Purple & White COMPATIBILITY - Grips with only an outer clamp are not compatible with our bar.
Giant Connect Trail Handlebar
$49.99
A strong and light trail riser bar designed to tackle the roughest singletrack. - 6061 aluminum alloy - 7 degree rearward / 5 degree upward sweep - 20mm rise
Chromag Fubar OSX 31.8 DH 25mm 800mm Handlebar
$110.00 - $118.00
Chromag has a strong history of manufacturing handlebars. The OSX is one of our best selling products and put us on the map as a bike components company. The OSX has a reputation for its perfect combination of bend and upsweep. This geometry combined with an array of colour choices has made the OSX a popular choice for pretty much any discipline of mountain biking. The OSX is the next step in our progression. By refining the shape, and utilizing variable butting, high grade alloys and advanced heat treatment techniques, we have increased the fatigue life by over 50%. So much so, that we’ve seen fatigue test results reach over 1 million cycles.
No Image
$115.00
Our first major success at Chromag was the design and production of forward, relevant handlebars and in 2005, we were arguably the most progressive handlebar producer with some of the widest, strongest bars on the market. The OSX35 is built off the foundation of the classic OSX, with a 35mm clamp. More DH/Enduro focused than the OSX 35mm clamp 7000 series alloy provides highest strength to weight of all of our bars
Bontrager Line Pro Carbon 35 MTB Handlebar
$254.99
The Line Pro Carbon MTB Handlebar adds strength and saves weight. This trail-tough bar has an oversized 35mm diameter, and it's built with OCLV Carbon so it's strong enough for even the most demanding trails and compliant enough for comfort on long descents and rugged terrain. - Pro-level quality handlebar in oversized 35mm clamp diameter offers increased strength and minimal weight - 15mm rise helps you dial in the perfect hand position - Brake and shifter lever position lines for spot-on control setup - 40mm of cut marks on each side for easy width customization - OCLV Carbon construction is the benchmark for durability and light weight
49°N Alloy Riser Handlebar 25.4mm
$26.99
• Lightweight and durable alloy riser bar • 5 degrees up-sweep / 9 degrees back-sweep for optimal riding comfort
TruVativ Atmos 7k Riser Bar
$103.00
The Atmos 7k aluminum riser bar series feature a 9° backsweep and 760mm width that is trimmable by 30mm at each end for a possible width of 700mm. The bar is available in 3 rise variants: 0mm, 10mm and 20mm. Made from tough 7050 Lightweight aluminum, the bar weighs just 250g at full width. - 760mm wide - Wide to start and trimmable by 30mm each side - Made from tough 7050 lightweight aluminum SPECIFICATIONS - Type: Riser - Application: XC - Clamp Diameter: 31.8mm - Width: 760mm - Backsweep (degrees): 9
TruVativ Descendant 35mm Carbon Riser Bar
$268.00
On the big days, it's the small comforts that make the ride better, longer. That's why we re-engineered our carbon riser bars to improve feel, flex and rider positioning and reduce trail buzz. These bars are stiff, precise and forgiving. With a re-tuned carbon laminate, your shoulders, arms and hands keep fresh all day. - Available in 760mm carbon with 20mm rise - 35mm clamp - Super-wide to start and trimmable by 40mm (20mm each side) - Specialty tuned carbon laminate to absorb noise while maintaining stiffness SPECIFICATIONS - Type: Riser - Clamp Diameter: 35.0mm - Width: 760mm - Rise: 20mm - Backsweep (degrees): 7
TruVativ Descendant 35mm Riser Handlebar
$103.00
Combine a proven shape, proven width, proven materials, and a take-no-prisoners approach, and you’ve got the 7050 Descendant riser bar. It’s stiff, tough, dependable, and gives you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Stiff, precise, and super-wide - Made with tough 7050 alloy - Descendant geometry from TruVativ's best enduro rider’s input - Backsweep: 7° - Upsweep: 5°
TruVativ Descendant Downhill Carbon Riser Handlebar
$249.99
With the Descendant series, TRUVATIV focuses in on the characteristics that matter most to true mountain bikers: durability, specificity, affordability, and style. Guided by input from the best riders, the components in the Descendant line have been designed to work on the most aggressive trails. - Stiff, precise, and super-wide - Carbon fiber perfection
TruVativ Descendant Riser Carbon Downhill All-Mountain Handlebar
$268.00
It's Stiff, Not A Stiff. It's the little things that matter most. That's why we scrutinized our carbon riser bars, tasking our pros and engineers to make great even better. The result? We added 5mm to the rise of our widest bar; and fine-tuned the carbon laminate. This translates to an improved riding position, more feel and flex, and less arm fatigue making your time on the trail more smiles, less chatter. Features: - Super-wide to start and trimmable by 40mm (20mm each side) - Specialty tuned carbon laminate to absorb noise while maintaining stiffness Specifications: - Clamp Diameter: 31.8mm - Width: 760mm, 800mm - Material (HB): Carbon - Rise (HB: 25mm - Type (bar): Riser - Upsweep (degree): 5
TruVativ Descendant Riser Handlebar
$96.00
Combine a proven shape, proven width, proven materials and a take-no-prisoners approach, and you’ve got the new Carbon 7050 Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Material: Al-7050 - Width: 760mm - Backsweep: 7-degrees - Rise: 20mm - Upsweep: 5-degrees - Colors: Black
SQlab Handlebar 311 2.0 - 31.8 Low
$162.50
The 16° backsweep provides a natural transition from lower arm to the hand. This is especially important with handlebars of width greater than 700 mm. The 10mm forward reach almost make up for the reduced reach which the higher sweep provides. The 5° upsweep bring the elbows into a perfect position for a dynamic riding style. Only the best in materials are used. Careful and precise bending and manufacturing processes make the SQlab 311 one of the most advanced handlebars on the market. The backsweep largely stems from the motocross arena where a similar backsweep and upsweep is custom. Only if the ergonomics are 100% perfect, you can ride at maximum pace and your body endure the associated high strain in the long run. The handlebar may not be used at bikeparks and for downhill-bikes. Also available in 27.0 mm along with a reduction shim for 31.8 mm stems. The smaller diameter increases the bar's flex properties. The shim - available in both plastic or aluminium – ensures a good fit of the bar in the stem and reduces the stress raisers at the edge of the stem. The pictured stem is not included in the scope of delivery. - Area of use: MTB tech and trail - Weight: 320g - Clamping: 31.8mm - Width: 740mm - Shortened maximum width: 700mm - Backsweep: 16° - Upsweep: 2.5° - Stretch: 10mm - Material: Aluminum
Renthal Fatbar Carbon
$249.99 - $349.99
- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.
Renthal Fatbar Lite Carbon 35
$299.99
- The Fatbar Lite Carbon 35 is the ultimate light-weight, trail-proof handlebar. - Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon 35 is the clear market leader in terms of weight, strength, stiffness and most importantly, ‘rid
Renthal Fatbar V2
$159.99
- The second version of the Fatbar has undergone a full structural re-design. - In keeping with the demand for wider, gravity oriented handlebars, the width increased to 800mm. - Proven high grade 7050 T6 aluminium and variable gauge taperwall construction
FSA Comet Riser Handlebar
$71.00
Budget-friendly mountain bars with stylish flair. - Plain gauge, tapered and shot-peened AL6061/T6 - Shot-peened for surface hardness - 15mm rise - 9° backsweep, 4° upsweep - Bar Clamp Diameter: 31.8mm - Material: Alloy - Width: 740mm
Deity Components Racepoint
$119.99
The all-new Racepoint Aluminum DH Handlebar was made with our proprietary Gradient Butting Technology, which allows us to put material where we need it and nowhere we don't. This makes for a significantly stronger handlebar at a similar weight to our competitors. We are 100% confident our new 35mm bore Racepoint DH Handlebar demolishes the competition with an 810mm width in both 25mm and 38mm rise options. You simply won't find a more refined handlebar option with this level of detail, durability, and performance. - Oversized 35mm Bore Aluminum Handlebar - Designed for Downhill / Enduro / All Mountain - Incredibly detailed two tone bead blast and polish ano finish - Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology - 810mm wide - 9 degree bend x 5 degree upsweep - Flex and deflection characteristics designed to match the Blacklabel handlebar - Features measured cut marks and center alignment detail - Black ano finish with colored graphics - Covered by our Lifetime Crash Replacement Policy to the original owner - 25mm rise: 327 grams - 38mm rise: 330 grams
Deity Components Ridgeline
$119.99
When designing the all-new Ridgeline aluminum trail handlebar, our goal was to create the perfect trail bar that disappears beneath you while encouraging you to chase adventure and seek out new experiences wherever possible. We precisely targeted lower rise options at 15mm and 25mm with a stable width of 800mm for a more efficient and aggressive position on the bike. To do this, we took an oversized 35mm bore platform and dispersed the load over an 800mm width. It was critical for us to keep the weight down without sacrificing strength. This is where our unique proprietary Gradient Butting Technology shines, allowing us to remove excess material in areas of less stress and fatigue that can cause the stiff feeling commonly felt with other 35mm handlebars on the market. We can then add material to areas of greater stress and fatigue to increase the long-term strength and durability. This gives you, the rider, more confidence to chase new experiences and forget about the gear beneath you. Our goal is for you to become one with the bike and never let up on chasing your new adventure! - Oversized 35mm Bore Aluminum Handlebar - Designed for Enduro / All Mountain / Trail - Incredibly detailed two-tone bead blasted and polished ano finish - Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology - 800mm wide - 9 degree bend x 5 degree upsweep - Flex and deflection characteristics designed to match the Skyline handlebar - Features measured cut marks and center alignment detail - Black ano finish with colored graphics - Weight: 303 grams
Deity Components Speedway Carbon
$234.99
For DEITY, speed motivates us in everything we do and is certainly the inspiration for the all-new Speedway Carbon DH Handlebar. Built for the most demanding and brutal conditions in the world with only one goal at hand…insane, mind-numbing speed. Not only do all DEITY carbon handlebars beat every other bar on the market in strength, they are specifically refined to allow the rider to push the limits while maintaining complete control. At 810mm wide with a 30mm rise, this 35mm bore handlebar is impressively responsive and comfortable at the same time. We've found the sweet spot that absorbs maximum vibration, chatter, and impact while maintaining the stiff reactive feeling that allows you to dance on the edge of catastrophe, ever increasing your need for speed. - Oversized 35mm Bore Carbon Handlebar - Designed for DH / Enduro / All Mountain - Developed and designed exclusively with our own in house DEITY molds - Unidirectional Carbon Construction - Damping properties reduce hand fatigue - 30mm Rise - 810mm Width - 9 degree bend x 5 degree upsweep - The ultimate combination of strength, weight, and ride quality - Textured non-slip stem clamping surface - Textured grip ends for added bite - The strongest 35mm Downhill / Enduro Carbon Handlebar on the market! - Available in Matte Unidirectional Black Carbon with colored graphics - Covered by our Lifetime Crash Replacement Policy to the original owner - Recommended MAX Torque Spec range (4 - 4.5 Nm) - Weight: 245 grams
Bontrager Kovee Elite 35 MTB Handlebar
$99.99
- Oversized 35mm clamp diameter offers increased strength and minimal weight - Shifter and brake lever position lines for spot-on control setup - 4 degree upsweep and 9 degree backsweep optimal for XC and trail - 40mm of cut marks on each side allow for easy width customization
Bontrager Line 35 MTB Handlebar
$109.99
A 35mm mountain bar that maintains a forgiving ride feel and maximizes strength with minimal weight. Large and in charge Line 35 is ready for any terrain and changes what's possible on the trail. It maintains comfort and control on any ride, and an oversize clamping diameter increases strength and decreases overall bar and stem weight while ensuring a compliant, forgiving ride. Proven sweep and convenient graphic markings help dial in the perfect setup. Product details - Oversized 35mm clamp diameter offers lighter weight and higher strength than 31.8mm diameter - Quad-butted, tapered wall, 7050-T6 aluminum construction - Laser-etched brake lever position lines for spot-on control setup
Bontrager Line Pro Carbon 35 27.5mm Rise MTB Handlebar
$254.99
The Line Pro Carbon MTB Handlebar adds strength and saves weight. This trail-tough bar has an oversized 35mm diameter, and it's built with OCLV Carbon so it's strong enough for even the most demanding trails and compliant enough for comfort on long descents and rugged terrain. - Pro-level quality handlebar in oversized 35mm clamp diameter offers increased strength and minimal weight - 27.5mm high rise helps you dial in the perfect hand position - Brake and shifter lever position lines for spot-on control setup - 40mm of cut marks on each side for easy width customization - OCLV Carbon construction is the benchmark for durability and light weight
49°N Steel Repair Bar
$15.99
- 25.4mm bar clamp - 620mm width with 10 backsweep
One Up Handlebar Carbon
$182.00
ONEUP CARBON BARS. Strong, lightweight & vertically compliant. The goal for the new OneUp Carbon Handlebars was to make the best feeling bar possible, something which would let us ride harder for longer. The solution is our patent pending oval shape which combines the best ride characteristics of 31.8mm and 35mm bar standards into one package. This is the most comfortable bar we’ve ever ridden, period. It's strong, lightweight, minimizes arm pump and vibration and maximize steering response. 35 done right. "The OneUp bar gives me all of the confidence inspiring attributes of a 35mm bar with a bit of forgiveness engineered in for those big descents. I've been so impressed after putting it through the paces for the last year." —Thomas Vanderham Almost every other carbon bar on the market copies the simple tapered profile of an Aluminum bar. With carbon you can take advantage of more complex shapes to get a better performing product, so that's what we did. If you actually care about bar compliance, then you don't make a regular 35mm diameter bar. Sure you can try to "optimize" the flex slightly with layup, but geometry is king and you're fighting a losing battle. The OneUp bar profile minimizes the length of the 35 diameter clamping area as this is the stiffest portion of any 35 diameter bar. The 35mm clamp diameter quickly changes to a flattened, oval shape in the transition zone and then to a standard 22.2mm clamp diameter for the control zone. We bench marked the OneUp bar against the most popular carbon bars on the market as well as foam filled aluminum bars. The results were, on average, a 21% increase in vertical compliance (comfort) coupled with a 28% increase in steering stiffness (responsiveness). These are more than just marginal gains. Until now the 35mm diameter standard has had a bad reputation and rightly so. This is 35 Dia. done right. SPECS Geometry: 800mm Wide / 35mm Dia. / Sweep 8° Back 5° Up Weight: 20mm Rise (220g) 35mm Rise (225g) Max Stem Clamp Width: 65mm Max Control Torque: 5Nm Colour: Black. Decal kits: Available in Red, Green, Blue, Orange, Purple & White
Page 1 of 1