Headsets

The Inset headset offers Chris King's trademark quality and durability in a low-stack configuration sized for contemporary headtube dimensions. King's legendary made-in-house bearings still form the centerpiece of the Inset headsets, with precisely machined aluminum cups and headset caps available in all ten classic Chris King colors. The Inset 2 is compatible with tapered 1-1/8 - 1-1/2-inch forks and frames using a 44/56mm headtube.

The Inset headset offers Chris King's trademark quality and durability in a low-stack configuration sized for contemporary headtube dimensions. King's legendary, made-in-house bearings still form the centerpiece of the Inset headsets, with precisely machined aluminum cups and headset caps available in all ten classic Chris King colors. The Inset 5 is compatible with tapered 1-1/8 - 1-1/2-inch forks and frames using a 49mm headtube.

Why We Make This Contemporary bicycle frame designs are incorporating larger diameter headtubes and forks with tapered-steerers to improve the bike’s front end stiffness, and as a result handling accuracy. This move has made particular sense for off-road bikes. We evolved the form and function of our legendary NoThreadset to address the variety of tapered steerers and headtubes on the market today. Why You Want It Every Chris King headset is built with our heat-treated bearings, and surgical-grade steel races machined simultaneously to ensure they are perfectly matched. As Chris King bearing tracks age and burnish, they actually get smoother, and all headsets are fully serviceable for years upon years of demanding riding. Built for the next generation of tapered road forks the Chris King InSet™ 8 is built to fit contemporary road and cross bikes that utilize 1-1/8” to 1-1/4”tapered steerer tubes and a 44mm headtube. Our InSet™ 8 combines our exclusive Chris King built bearings and our GripLock® retention system for unequalled riding quality. - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Legendary made-in-house bearings - Patented GripLock® retention design for dependable headset adjustment (US Patent 8662517) - Responsibly lightweight - Designed specifically for a 44mm straight headtube and a 1-1/8” to 1-1/4” tapered steerer tube

Why We Make This Headtube and fork steerer standards have proliferated in recent years, but for a long, long time these variables were more fixed, so we made thousands upon thousands of NoThreadsets™ to serve bikes with unthreaded fork steerers. We made them in a variety of diameters, and everyone was happy in the land. We still make it, because it’s still a great headset for all those bikes that are still rolling through the world with a headset that will never die. Why You Want It For decades our NoThreadSet™ set the standard for quality headset function delivering precision performance to numerous world champions, grand tour winners, and aspiring riders around the world. Every Chris King headset is built with our heat-treated bearings, and surgical-grade steel races machined simultaneously to ensure they are perfectly matched. As Chris King bearing tracks age and burnish, they actually get smoother, and all headsets are fully serviceable for years upon years of demanding riding. - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Legendary made-in-house bearings - Patented GripLock® retention design for dependable headset adjustment (US Patent 8662517) (1-1/8” only) - Available in 8 beautifully anodized colors in both bold and sotto voce marking options - Responsibly lightweight - Options to fit 1” and 1-1/8” straight steerer tubes

Why We Make This: The simple answer is that many contemporary bicycle frame designs call for the headset bearings to ride inside the frame’s headtube. After decades of making press-in bearing headsets, we needed to make headsets that worked in these newer frames. From the beginning we understood that integrated headsets posed a unique challenge in that the bearings are not pressed into a cup and sit loosely in the frame. When bearings are not pressed securely into a cup they shift and move, rapidly losing preload. As preload drops, the bearings are more susceptible to creaking, damage, and failure. That’s a problem we know how to solve. Why You Want It: Enter, our patented GripLock™ bearing cap. The GripLock™ preloads the headset independently of clamping onto the steerer, so it retains preload far better than the competition and is impervious to the ill effects of load spikes from large hits and heavy braking. This means smoother steering, no more creaking, and a longer lasting headset. Our GripLock™ design also takes the guesswork out of preloading a headset, because the bearing preload force is independent of the clamping force. Our headsets can be preloaded to a torque spec. Compatible with Open, 3T, All City, Low, Cinelli, Lynskey, and more. - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Legendary made-in-house bearings - Patented GripLock® retention design for dependable headset adjustment (US Patent 8662517) - 42mm 45x45 upper bearing for 2.8-3.0mm bearing ream depth. - 52mm 45x45 lower bearing - Compatible with our included baseplate and 45 degree integrated crown races

Chris King DropSet 3 Headset. - Crown Race: 30 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless - Bearing Type: Cartridge - S.H.I.S Lower: IS52 - S.H.I.S Upper: IS41

We started making headsets in 1976 and have been refining them ever since. Our DropSet™ 4 is built to be precise and dependable and sets the standard for quality integrated headset function delivering precision performance that is built on the same pedigree of Chris King headsets from the past 40 years. - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Legendary made-in-house bearings - Patented GripLock® retention design for dependable headset adjustment (US Patent 8662517) - 42mm 45x45 upper and lower bearing - Compatible with our included baseplate and 45 degree integrated crown races

Why We Make This The simple answer is that many contemporary bicycle frame designs call for the headset bearings to ride inside the frame's headtube. After decades of making press-in bearing headsets, we needed to make headsets that worked in these newer frames. From the beginning we understood that integrated headsets posed a unique challenge in that the bearings are not pressed into a cup and sit loosely in the frame. When bearings are not pressed securely into a cup they shift and move, rapidly losing preload. As preload drops, the bearings are more susceptible to creaking, damage, and failure. That's a problem we know how to solve. Why You Want It Enter, our patented GripLock™ bearing cap. The GripLock™ preloads the headset independently of clamping onto the steerer, so it retains preload far better than the competition and is impervious to the ill effects of load spikes from large hits and heavy braking. This means smoother steering, no more creaking, and a longer lasting headset. Our GripLock™ design also takes the guesswork out of preloading a headset, because the bearing preload force is independent of the clamping force. Our headsets can be preloaded to a torque spec. Compatible with many Specialized mountain bike frames, see headtube specifications here. Not compatible with the 21'-22' Stumpjumper EVO. - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Legendary made-in-house bearings - Patented GripLock® retention design for dependable headset adjustment (US Patent 8662517) - 42mm 45x45 upper bearing for 6.85-7.05mm bearing ream depth. - 52mm 45x45 lower bearing - Compatible with our included baseplate and 45 degree integrated crown races

We started making headsets in 1976 and have been refining them ever since. Our DropSet™ 6 is built to be precise and dependable and sets the standard for quality integrated headset function delivering precision performance that is built on the same pedigree of Chris King headsets from the past 40 years. - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Legendary made-in-house bearings - Patented GripLock® retention design for dependable headset adjustment (US Patent 8662517) - 41mm 45x45 upper and lower bearing - Compatible with our included baseplate and 45 degree integrated crown races

1-1/8 x 1.5" Stainless Steel, Angular Contact, Zero-Stack External Cup Headset for 44mm/44mm ID headtube framesets. MAXhit is Enduro's latest patent-pending innovation; where the bearing is actually the component. MAXhit headset beaings are designed to press directly into your bicycles headtube, eliminating the need for the aluminum cups that are traditionally used to carry the bearings. This unique design frees-up space for much larger balls that more than double the load capacity compared to standard headset bearings. The kit includes fork crown race and upper split-ring and and one black and one silver upper bearing cap. Machined entirely from 440C stainless steel and guaranteed for life, Maxhit headset bearings include proprietary double-lip labyrinth seals and Enduros extra high pressure grease to ensure a lifetime of trouble-free, heavy duty performance. SHIS: ZS44/28.6 | EC44/40 Vendor Part # HDK-0022

Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed stainless steel bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - 7075 T-6 aluminum cups machined in Fletcher, NC - Aluminum dual seal crown race protects lower bearing - Interlok spacer compatible - 110 year warranty

Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed stainless steel bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - 7075 T-6 aluminum cups machined in Fletcher, NC - Aluminum dual seal crown race protects lower bearing - Interlok spacer compatible - 110 year warrranty

1-1/8 x 1.5" Stainless Steel, Angular Contact, Zero-Stack Headset for 44mm/56mm ID headtube framesets. MAXhit is Enduro's latest patent-pending innovation; where the bearing is actually the component. MAXhit headset beaings are designed to press directly into your bicycles headtube, eliminating the need for the aluminum cups that are traditionally used to carry the bearings. This unique design frees-up space for much larger balls that more than double the load capacity compared to standard headset bearings. The kit includes fork crown race and upper split-ring and and one black and one silver upper bearing cap. Machined entirely from 440C stainless steel and guaranteed for life, Maxhit headset bearings include proprietary double-lip labyrinth seals and Enduros extra high pressure grease to ensure a lifetime of trouble-free, heavy duty performance. SHIS: ZS44/28.6 | ZS56/40 Vendor Part # HDK-0010

The GeoShift Performance Angle Headset allows you to adjust the geometry of your bike by changing the head tube angle, available in 1 or 2 degree options. This unique design lets the bearings sit at an angle to align with the steerer tube, preventing creaking noises commonly found with angle headsets that feature a spherical design. Reduce the head tube angle to make for slacker geometry and added stability on fast descents, or increase the angle using the opposite orientation of the headset, to make for steeper geometry and quicker steering with maximum front wheel traction. - Enduro black oxide coated chromium steel bearing included on both the upper and lower - Upper headsets ship with a star nut which can only be used on forks with steel or aluminum steerer tubes. For forks with carbon steerer tubes you will need a compression plug (sold separately) - Machined in the USA with lightweight, strong, durable aircraft-grade 6061 aluminum - Includes: Upper and lower cups, bearings, crown race, star nut, shims, stem cap with 5mm integrated spacer and bolt - 2 Degree Adjustment - Long version is designed for headtube lengths between 115 - 140 mm

The GeoShift Performance Angle Headset allows you to adjust the geometry of your bike by changing the head tube angle, available in 1 or 2 degree options. This unique design lets the bearings sit at an angle to align with the steerer tube, preventing creaking noises commonly found with angle headsets that feature a spherical design. Reduce the head tube angle to make for slacker geometry and added stability on fast descents, or increase the angle using the opposite orientation of the headset, to make for steeper geometry and quicker steering with maximum front wheel traction. - Enduro black oxide coated chromium steel bearing included on both the upper and lower - Upper headsets ship with a star nut which can only be used on forks with steel or aluminum steerer tubes. For forks with carbon steerer tubes you will need a compression plug (sold separately) - Machined in the USA with lightweight, strong, durable aircraft-grade 6061 aluminum - Includes: Upper and lower cups, bearings, crown race, star nut, shims, stem cap with 5mm integrated spacer and bolt - 1 Degree Adjustment - Long version is designed for headtube lengths between 115 - 140mm

Hellbender 70 Lite headset.

Hellbender 70 Slam headset.

Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Integrated bearings fit directly into compatible head tubes without the need of a bearing press. - Sealed stainless steel bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - 7075 T-6 aluminum cups machined in Fletcher, NC - Aluminum dual seal crown race protects lower bearing - Interlok spacer compatible - 110 year warranty

Cane Creek headsets with Hellbender stainless steel bearings with increased sealing elements and more grease in relation to the comparable 110 bearing. - Designed to bridge the gap between the 40-series and 110-series headsets

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. And, the 110 comes with an amazing 110-year, no-questions-asked warranty! - Technical Description: IS41/28.6/H9/x - Top Type: IS - Integrated - Top Head Tube Inside Dia.: 41.1mm - Stem Clamp Dia.: 28.6mm - Top Stack Height: 9mm (Short), 15mm (Tall) - Top Bearing Type: Top-quality, sealed stainless steel bearings - Material: 7075 aluminum - Weight: 41.81g

This is the Short Top Cover for the Cane Creek 110 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset. - For 1 1/8-inch fork/headset - Stack height: 8mm - 53 grams

Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Integrated bearings fit directly into compatible head tubes without the need of a bearing press. - Sealed stainless steel bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - 7075 T-6 aluminum cups machined in Fletcher, NC - Interlok spacer compatible - 110 year warranty

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

1-1/8 Stainless Steel, Angular Contact, External Bearing Kit for 34mm (1 1/8) ID head tube framesets This unique bearing kit eliminates the external headset bearing cup and provides a simple low profile solution where the bearing itself presses directly into the head tube. The kit includes fork crown race and upper split-ring and cap. Enduro only uses 440C stainless steel balls and races to provide long life and superior corrosion resistance in applications and environments that may be less than ideal. Stainless steel is an excellent alternative for use in wet conditions, if you wash you bike often, or where sweat can be a problem. Enduro Bearings also uses LLB type seals and CRC Marine Grease in these bearings to additionally water proof against the elements.. Color: Silver SHIS: EC34/28.6 | EC34/30 Vendor Part # HDK-0008

110 Series ZS62 Bottom headset from Cane Creek.

Wolf Tooth headsets are machined here in our Minnesota shop with aircraft-grade 6061 aluminum. They are designed to be lightweight, strong, and durable. Our headsets have three levels of industry-leading custom sealing to protect bearings from the elements and prolong the life of the headset. Available in a variety of colors. These IS headsets are for frames with molded-in internal bearing cups. Premium Headsets with Enduro stainless steel bearings have a lifetime warranty. Upper assembly features: - Ultralight Stem Cap with Integrated Spacer plus an aluminum bolt and a star nut. - 7, 15, and 25mm stack height top cover options (7mm cover = 8mm total stack, 15mm cover = 15mm total stack, 25mm cover = - 25mm total stack. - O-ring seal prevents water intrusion around the steerer tube. - Custom-molded upper lip seal provides additional protection for the upper bearing. - bearing top cap outer diameter 45.8 mm

- Bearing Type: Cartridge - Weight: 125g - Crown Race: 40 - S.H.I.S. Lower: ZS56 - S.H.I.S. Upper: ZS44 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless

- 1-1/8" / 1-1/4", 45°/ 45° ACB - Compatible with carbon or alloy head tubes - For tapered 47mm / 52mm OD head tube - For 1-1/8" to 1-1/4" tapered fork - Alloy top cover - Upper : 1-1/8" angular contact bearing black seal) - Lower : 1-1/4" angular contact bearing (black seal) - Stack height 15.6+1=16.6mm - 74 grams

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. • Technical Description: EC44/40/H12/x • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 44.00mm • Crown Race Seat Dia.: 39.76mm • Crown Race Type: Aluminum, Dual-Seal • Bottom Stack Height: 12mm • Bottom Bearing Type: Top-quality, sealed stainless steel bearings • Material: 7075 aluminum • Weight: 61.02g

This is the Bottom External Cup for the Cane Creek 110 Series headset. Please contact us if you have any questions about which parts are correct for your headset.