Other

RockShox Volume Reducer Kits

Replacement compression knobs for RockShox suspension forks.

FSA Mega Exo Small Parts.

Chainring spacer for adjusting the chainline on inner and middle chainrings. - Bag of 20

This BikeYoke allows the use of a standard shock in your Specialized bike. Epic 2018-2020 Includes: - 1x BikeYoke EP02 - 1x DU bushing - 1x reducer - 1x stainless steel bolt

Service kit for 100 hr service (re-adjusting play and replacing wiper). Kit includes: - 1x Wiper (with spring) - 6x Glide pin - 1x Lower bushing - 1x Foam ring - 1x C-clip R12

Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post. Compatible with: REVIVE MAX

Kit includes: - x2, Bolts (M5) with conical washers (T25 head) - x2, Barrel nuts Compatible with: - REVIVE / REVIVE 2.0 - REVIVE MAX - DIVINE - DIVINE SL - DIVINE SL RASCAL

When you've got to finish your bike off right. The Burgtec Stem Spacers are the perfect finishing kit.

DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style. - DEITY Circuit Seatpost Clamp - 38.6mm, Red

Replacement lower hardware for Rockshox forks.

Replacement top caps and parts for RockShox forks.

Connectamajig allows for several disconnects and reconnects before a system bleed is required. Comes stock on aftermarket versions of Reverb Stealth for easy internal routing.

Eyelet Bushings for repair and maintenance of Rockshox rear shocks.

Internal components for servicing the Reverb and Reverb Stealth mechanism.

Damper IFP Bodies for repair and maintenance of Rockshox rear shocks.

RockShox Reverb/Reverb Stealth IFP - Fits Reverb and Reverb Stealth

The new DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep.

FSA Standard Headset Bearings

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Carbon fiber headset stack spacers, precision cut to ensure proper headset function. - Compatible with all threadless and threaded headsets

Valve-extension-adapter. Allows easier access to your dropper valve for shock-pumps with short valve heads.

Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. - Constructed from 7075 Aluminium and made to the manufacturer's exact specifications. - Note: This axle is not compatible with Evil Bikes - This axle is very common with a lot of bike brands, please visit burgtec.co.uk for complete fitment info. - Thread M12 x 1.75mm pitch

Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. They feature "a get out of jail" 6mm Allen key on the drive side of the axle if you manage to round the non-drive side. - Constructed from 7075 Aluminium and made to the manufacturer's exact specifications. Fits Yeti Bikes: - 160E - Arc - SB120 - SB140 MY23+ - SB160 Note: Original part for SB120, SB140 MY23+, SB160 is 172mm length, the 174mm axle is still compatible.

Pre-tension Bolt for Shimano Hollowtech II Cranks and Shimano E-bike motors. Simplify things with an 8mm fitting and add a splash of your favourite anodised color. Never worry about turning the garage upside down at midnight to find that little 'thingy' to pre tension your cranks ever again. - Remember this product needs minimal torque and do not exceed the manufacturers maximum recommended torque 0.7 to 1.5Nm - Suits: XTR, XT, SLX, LX, Deore, Saint & Zee cranks and bikes with a Shimano e-bike motor.

Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. Dropout Bolt is also provided. Constructed from 7075 Aluminium and made to the manufacturer's exact specifications. Fits the following Santa Cruz bikes: - 5010 V1, V2, V3 - Bronson V1, V2, V3 - Nomad V2.1, V3, V4 - Chameleon V5, V6, V7 - Heckler V7 - Heckler E-Bike V8 - Heckler MX E-Bike - Bantam V1 - Blur TR V1.1 - Blur XC V2.2 - Blur LT V2.2, V2.1c - Blur V3 - Highball V1, V2, V3 - Tallboy LT V1.1 - Tallboy V1.1, V2, V3, V4 (MY20 & MY21 only) - High Tower V1 and V2(MY20 & MY21 only) - High Tower LT V1 - Mega Tower V1 - And Juliana Equivalents Exact Axle Length is 168.5mm x Thread M12 x 1.0mm pitch also fits other brands that use this size.

Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame

Upgrade your standard 12-speed rear mech with our 14T+16T set coupled with Garbaruk RD cage for 12-speed Shimano derailleurs for improved shifting quality. - 7075-T651 Anodized Aluminum Alloy - 22g Compatible rear derailleurs (when equipped with Garbaruk Shimano 12 speed cage): SLX RD-M7100-SGS, XT RD-M8100-SGS, XTR RD-M9100-SGS Bolts for pulleys are not included

With Garbaruk RD cage set for 12-speed SRAM AXS rear derailleurs, you can squeeze much more performance out of your drivetrain thanks to the combination of rear derailleur cage, oversized pulleys and extender link which allows to get more drivetrain range, smooth shifting, and more precise operation of your bike transmission. You can now use cassettes up to 52T to build up your Gravel/CX bike. By re-positioning the upper derailleur pulley closer to the small cassette cog and further away from the largest cog, we have been able to allow rear derailleurs designed to be used with 10-33T cassettes to be capable of running smoothly with 10-52T cassette. Fully compatible with Sram 12-speed AXS flattop chain. IMPORTANT: To be used in 1x setup only with the listed compatible rear derailleurs. Compatibilitty: SRAM 12sp RED AXS, SRAM 12sp FORCE AXS, 12sp Rival AXS, SRAM etap 11speed A2 rear mech, with 11/12-speed chains including Shimano HG+ and SRAM AXS flattop.

RockShox Rear Shock Parts