Filter By:

  • Show More Brands
  • Show Fewer Brands

Handlebars

Zipp Vuka Aero Integrated Aerobar
$1,251.99
Vuka Aero is an integrated aero bar that can be used with any stem to help you find your ideal position on the bike. This bar is stiff and streamlined while maintaining the UCI's 3:1 aspect ratio requirement. - Removable center cap, placed in front of the stem, adds 5 percent stiffness to the aero bar and integrates seamlessly with the airfoil - Ships with base bar, extension clamps, armrest clamps, risers (two each of 5mm, 10mm, 25mm and 50mm risers), Vuka armrest pads, Vuka armrest and steel hardware - Clamp hardware and riser kits for the Vuka Aero are modeled after Zipp's pro-proven Vuka Stealth aero cockpit - Rapid Routing cable exits are positioned for easy installation of brake cables - 22.2mm extensions and stem not included - Extensions sold separately - Clamp Width: 54mm
3T Revo LTD
$1,041.99
The bullhorn bar was introduced to the cycling world by 3T on Francesco Moser’s hour record bikes. Its design principle hasn’t significantly changed since, until now. The Revo seems so obvious, now, providing a better, safer and more powerful grip for the rider. Then again, good ideas always seem obvious after the fact. Revo is the first-ever aerobar to attach the basebar wing to the front of the grips instead of the back, literally changing aerobar design 180°. The advantages are clear: - The rider’s hands cannot slide forwards off the grips, so it’s safer and easier to use at all times - It offers better grip and handling on tough descents, rough roads, and sketchy turns - It improves aerodynamics — the basebar wing has a sharper angle of attack with the free air flow than standard basebars - Wing material: Unidirectional carbon - Extension material: Unidirectional carbon - Cradle material: Alloy - Pad material: Neoprene - Base bar width (c-c): 400mm - Outside pad width: 240-340mm - Center pad width: 130-230mm - Pad stack: 30-97mm - Pad reach: 20-70mm - Grip inside reach: 72mm - Grip drop: 46mm - Clamp diameter: 31.8mm - Extensions: S-bend - Cradle: New comfort - Weight: 700g (minimum stack) - Finish: Stealth black
Pro Stealth Evo Stem/Bar Combo - Anatomic
$869.99
- Fully integrated UD Carbon stem-handlebar combination - Integrated Dual Cable Routing - Sizes: 40, 42 and 44cm (C/C) - Extensions: 90-130mm - Angle: -8 degree - Suitable for 1-1/8" forks - Color: UD Carbon - Weight: from 410g
Bontrager XXX Integrated Road Handlebar/Stem
$769.99
The Bontrager XXX Integrated Handlebar/Stem is a one-piece carbon bar/stem combo that brings clean looks and light weight to any road bike. Lightweight 100% OCLV Carbon construction offers a great road feel and control, while calibration marks and a flat front surface ensure easy lever installation. - Seamless accessory integration with Blendr - Flat surface front of bar for clean cable routing - Calibration marks allow precise, accurate and repeatable brake lever position - Variable radius, compact flare (VR-CF) shape offers wrist clearance in the drops - 100% OCLV Carbon construction - Internal relief channel eliminates need for additional spacer above stem - Safe for use with carbon and alloy steerer tubes
3T Superergo LTD Stealth
$588.99
Since its introduction, the most common feedback on our Ergonova dropbar was “don’t change a thing”. But observing how our customers ride, we noticed many spend considerable time holding the bars in the corner section, especially while climbing. Designing the corners specifically for this function has created a bar that is supremely comfortable not only on the tops and the drops, but also in this intermediate position. Further redesigns to the hood and drop shapes to accommodate the latest shift/brake levers help to create the new standard in ergonomics - Material: Unidirectional carbon - ultralight layup - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
3T Superleggera LTD Stealth
$588.99
Superleggera, the lightest 3T drop bar ever also offers classic good looks. The new constant-taper center section creates a more structurally efficient shape (lighter, stiffer) and a remarkably comfortable hand support despite visually fitting within the classic dimensions of a drop bar. The drops use a classic round shape favored by traditionalists and many pro racers. - Constant-taper center section & traditional round drops - Weight: 166g - Material: Unidirectional carbon - ultralight layup - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
Zipp SL-70 Aero Handlebar
$481.99 - $507.99
Zipp's SL-70 Aero is, in every way, a high-performance bar. This unidirectional carbon handlebar is packed with innovations for best-in-class fit, ergonomics and aerodynamic performance. With its wing-shaped bar top, the SL-70 Aero features Zipp’s most advanced bar refinements while building on the trend-setting aero legacy of the VukaSprint. Beyond aero performance, the SL-70 Aero features a 70mm reach to allow proper fit without compromising stem length and steering control. The 10-degree ramp angle to the brake hoods eliminates the need for up-rotated bars. The bar also provides ample wrist clearance for riding and sprinting in the drops. - Unidirectional carbon construction - Airfoil top bar reduces drag by .63 Newtons over traditional round tube - Drops angled out 4 degrees with 10 degree ramp angle - Features Zipp’s Rapid Routing system, also used in the Vuka Aero system, for easy internal cable routing. UCI legal. - Compatible with all mechanical brake/gear systems and all electronic gear systems. - Not clip compatible.
Bontrager Race X Lite Carbon Aero Bullhorn
$500.00
Bontrager's Race X Lite Carbon Aero Bullhorn is light, strong, ergonomic and a great upgrade for your wind-cheating machine. Its hand-made OCLV carbon construction damps vibrations to quash road buzz and trims grams to give you the lightest aero setup possible. This UCI-legal base bar is compatible with Bontrager clip-ons and aero brake levers, and it uses internal cable routing for a slippery, low-drag profile. And, it boasts a 31.8mm clamp diameter for stiffness that kicks in every time you accelerate.
3T Ergosum LTD
$481.99
You'll love the shaping of 3T's Ergosum LTD handlebar. A tight radius where the brake lever sits and a gradual bend make it easy to reach your levers while in the drops. Its high-modulus carbon fiber construction with varying wall thicknesses results in a bar that's lightweight and strong for sprinting and climbing. And, double cable grooves provide a smooth feel when you're on the tops.
3T Rotundo LTD
$481.99
A traditional round drop meets modern materials and the result is 3T's Rotundo LTD. It's constructed of high-modulus carbon fiber with varying wall thicknesses that results in a lightweight and strong bar that's also super stiff for sprinting and climbing. Double cable grooves provide a smooth feel when you're on the tops.
3T Tornova LTD
$481.99
3T's Tornova LTD carbon bars give you comfort in an ultra light, stiff package. Traditional round bends feature a small downwards step above the mounting area for the shifter clamp, enabling the shifter tops to align truly flat with the top of the bar. This makes for a more comfortable handhold. Internal routing aligns cables and keeps your bike's front end smooth, so the bar assembly is tidier and cables stay cleaner.
3T Superleggera Team Stealth
$471.99
Superleggera, the lightest 3T drop bar ever also offers classic good looks. The new constant-taper center section creates a more structurally efficient shape (lighter, stiffer) and a remarkably comfortable hand support despite visually fitting within the classic dimensions of a drop bar. The drops use a classic round shape favored by traditionalists and many pro racers. - Constant-taper center section & traditional round drops - Weight: 186g - Material: Unidirectional carbon - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
Bontrager XXX VR-C Handlebar
$449.99
Unparalleled ride quality XXX is a testament to the power of judicious carbon composite engineering. Not only is it incredibly light and stiff, but its OCLV Carbon construction also offers an unparalleled ride quality. The Unique Variable Radius Compact bend creates the ideal hand position for quick transitions from the tops to the drops. Key features - OCLV Carbon fiber construction - Variable Radius Compact (VR-C) design allows shorter reach and drop - Laser-etched brake lever position lines for spot-on control setup
Bontrager XXX VR-CF Aero Handlebar
$449.99
- OCLV Carbon fiber construction - Variable Radius Compact Flare (VR-CF) increases wrist clearance for ergonomic positions - Compatible with clip-on aero bars - KVF profile top section saves 23 seconds per hour compared to traditional bars - Internal cable routing for Di2 and standard housing - Laser-etched brake lever position lines for spot-on control setup - UCI compliant - Drop: 123mm - Reach: 93mm - Weight: 220 grams (38cm), 225 grams (40cm), 230 grams (42cm), 235 grams (44cm)
3T Superergo Team
$439.99
3T started life as a master drop bar manufacturer. Nobody else had the same technical ability to manipulate tubing, and thus 3T became the first company to focus on more ergonomic (i.e. more complex) shapes. That focus continues to this day, now with the complete shape freedom of carbon. The previous generation, the Ergonova, was lauded worldwide as the top ergonomic bar, in fact, it was so good we didn’t touch the center section at all when designing the new SuperErgo. We did change everything else though, ensuring the SuperErgo will continue 3T’s streak as the ergo bar of choice for road cyclists from beginners to Team BMC and Team Aqua Blue. - Material: Unidirectional carbon - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
3T Superleggera Team
$439.99
Superleggera, the lightest 3T drop bar, ever also offers classic good looks. The new constant-taper center section creates a more structurally efficient shape (lighter, stiffer) and a remarkably comfortable hand support despite visually fitting within the classic dimensions of a drop bar. The drops use a classic round shape favored by traditionalists and many pro racers. - Constant-taper center section & traditional round drops - Weight: 186g - Material: Unidirectional carbon - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
Zipp SL-70 Ergo Handlebar
$438.99
Light weight, comfort, and strength: The SL-70 Ergo is the ultimate handlebar for long days in the saddle. The SL-70 Ergo improves upon the flat bar top shape of its carbon predecessor, the Contour SL bar, but also with numerous modern features sought after by riders and pro bike fitters. The SL-70 Ergo sports a 70mm reach and 128 drop. The short 70mm reach allows bike fitters flexibility in achieving a comfortable position without sacrificing steering control. The drop utilizes a variable radius, allowing for multiple hand positions and deeper movement into the drop. As a result, reach to the brake lever is shorter. A 3° backsweep on the flat tops keeps the wrist in a comfortable position, essential for long days on pavement or gravel, while the 10° ramp angle provides a smooth transition to modern shifter hoods. Brake and shifter housing is elegantly hidden along the underside of the bar. The SL-70 Ergo weighs only 205g but is strong and durable enough for the demands of aggressive cyclocross and gravel racing. - Clip-on compatible
3T Aeronova Team
$437.99
The Renaissance Man of handlebars, 3T's full carbon Aeronova Team does it all. The mega-wide top section is just barely UCI legal, taking full advantage of the 3:1 rule for maximum aero advantage. The elongated, wing tubing also makes for an ergonomic grip when the road tilts up. Feathery light and stiff, the Aeronova is master of the mountains as well as the finish line chute. Internal cable routing keeps the tape-free tops aero and looking fresh, and 127mm drops for a short and shallow reach provide a confidence boost during sprints and descents.
3T Aerotundo Team Stealth
$414.99 - $415.99
Aerotundo is a traditional round road drop with aero-section tops to complement the latest aero road bikes. The tops are a new aerofoil section designed for the least-possible drag permitted by UCI rules. Cable routing is internal for less drag, a sleeker appearance, and reliable setup of manual or electronic gear systems. The bend is medium-deep and square like Rotundo’s, with a 139mm drop. Width at the hoods is the same as at the ends. Aerotundo Team is built in all-carbon-fiber and finished UD Gloss Black with 3T’s new ‘Road’ brand graphics. It can be fitted with 3T and compatible Clip Ons for added versatility. Aerotundo Team Stealth is built in all-carbon-fiber and finished UD Matte Black with 3T’s new ‘Road’ brand graphics. It can be fitted with 3T Clip Ons. Weight: 220g (42cm) Width: 40, 42, 44cm Clamp: 31.8 mm Material: Carbon-fiber Drop: 139mm Reach: 113mm Finish: UD Gloss Black/UD Matte Black Certification: CEN
3T Ergosum Team
$393.99 - $415.99
You'll love the shaping of 3T's Ergosum Team handlebar. A tight radius where the brake lever sits and a gradual bend make it easy to reach your levers while in the drops. Its carbon fiber construction is lightweight and strong. Double cable grooves provide a smooth feel when you're on the tops.
3T Rotundo Team
$393.99 - $415.99
A traditional round drop meets modern materials and the result is 3T's Rotundo Team. It's constructed of high-modulus carbon fiber with varying wall thicknesses that results in a lightweight and strong bar that's also super stiff for sprinting and climbing. Double cable grooves provide a smooth feel when you're on the tops.
Bontrager Pro Isocore VR-CF Handlebar
$399.99
Chain-rattling pavement is no longer an issue thanks to Bontrager's innovative IsoCore technology in this Pro IsoCore VR-CF road bar. An additive to the carbon layup, IsoCore mutes 20% more vibrations than other carbon bars. Once you experience the comfort and control of IsoCore, you'll never want to ride another bar. - OCLV carbon with IsoCore continuous inner-laminar technology - Replaceable IsoZone EVA pads maintain original grip diameter - Variable Radius Compact Flare (VR-CF) bar shape offers greater comfort in all hand positions - IsoCore technology decreases road vibration by 20% over traditional carbon bars - Includes four replaceable EVA IsoZone pads for tops and drops
Bontrager Pro Isocore VR-SF Handlebar
$399.99
Take on longer rides and rougher roads with Bontrager's Pro IsoCore road handlebars. Feel the difference 20% less road vibrations can make on your next gravel grinder or gran fondo. IsoCore inner-laminar technology and IsoZone padding combine to virtually eliminate road chatter while maintaining the strength of our OCLV carbon.
3T Tornova Team
$393.99
Tornova combines the plush comfort tops of Ergonova with the traditional round bends of Rotundo for a pattern many riders have been waiting for. Two new features further enhance Tornova’s comfort and convenience: internal cable routing, and stepped location for the brake/shifter units. The stepped-location feature molds a small downwards step above the shifter clamp, so the shifter tops align truly flat with the top of the bar. This makes for a more comfortable handhold. Internal routing aligns cables better, so the bar assembly is tidier and gear changes snappier. Tornova Team is a versatile, light racing bar that supports clip-ons. Tornova Team Stealth is a versatile, light racing bar featuring the elegant Stealth finish in Matte Black. Clip-on compatible. Note: Tornova bar width is specified center-to-center at hoods. Drops flare by 2° and are approx 1cm wider at bar end. Weight: 220g (42cm) Width: 40, 42, 44cm Bar: 31.8mm Material: Carbon Drop: 139mm Reach: 83mm Routing: Internal Finish: UD Gloss Black/UD Matte Black Certification: CEN
Thomson Cyclocross Carbon Handlebar
$375.99
For cyclocross, Thomson presents the Katie Compton Signature ‘cross bar. Katie brings her multiple championships, European racing, and Olympic experience to give you a bar built her way for ‘cross. It’s the natural transition from your Thomson road bar for the ‘cross season. Twin flats on the bottom of the bar allow taping your housing to create a round bar when wrapped. The top profile is round and as wide as possible. This allows auxiliary brake levers to be safely used and still leaves lots of room for your hands. This is the carbon fiber cyclocross handlebar built to take all the season can dish out. Certified to EN, tested to DIN+.
Whisky Parts Co. No.9 Carbon Rise Handlebar
$315.99
Whisky Parts Co. carbon handlebars are tested to the highest standards to give you a high level of performance mile after mile. So keep the weight low and stay comfortable and in control while you shred with the Whisky Parts Co. No.9 Carbon Rise Handlebar. - 5 Degree Upsweep - 9 Degree Backsweep - Trimmable ends - Matte UD full carbon construction - 258 grams
TruVativ Descendant Downhill Carbon Riser Handlebar
$300.99
Combine a proven shape, proven width, proven materials you’ve got the Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. - Stiff, precise and wide - Weight: 240g - Material: Carbon
Pro Tharsis XC Flat Top Di2 Handlebar
$280.99
- Lightweight UD carbon construction - Cuttable bar-ends - Matte carbon finishing - Weight 160g - Di2 compatible with internal wire routing - 720mm wide - 31.8mm clamp diameter - 5mm rise
TruVativ Descendant Carbon Riser Handlebar
$276.99
Combine a proven shape, proven width, proven materials you’ve got the Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. - Stiff, precise, and wide - Weight: 230g
Thomson MTB Carbon Cross Country Handlebar
$260.99
Thomson's Carbon MTB bars are made with three different fiber types for strength, durability and long times in the saddle. Thomson's MTB Carbon Cross Country Handlebar is a flat bar with an off center clamp area allowing a flat riding position and reversible for a 5mm drop. It also has 8° of backsweep for comfort and 730mm in width for plenty of leverage. The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed. The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders. All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+. Friction Paste recommended for installation
Page 1 of 3 Next page